• 한국융합학회논문지
• /
• 제6권4호
• /
• pp.9-14
• /
• 2015

본 논문은 기타의 목 부분의 형상에 따라 가해지는 힘에 의한 휘어짐의 문제를 해결하기 위한 것으로, 기존의 기타를 보강하여 실제 사용 시, 하중에 취약한 부분을 파악하는 방법을 연구하였다. 본 연구에서는 실제 기타에 적용되는 목재의 물성치를 연구모델에 적용하고 모델링 한 후, 유한요소해석을 수행하였다. 본 논문의 연구를 통해 나온 결과를 사용하여 기존의 기타의 문제로 지적되어온 휨과 파손에 대한 기반자료를 얻을 수 있을 것으로 사료되며 이를 보강 할 수 있는 디자인을 연구하여 그 기타를 개선하고자 한다. 개선된 연구모델에 대한 결과를 토대로 실제 설계에 응용한다면 휨과 파손을 방지하여 내구성을 향상시킬 수 있으며 디자인 면에서의 융합기술로의 접목도 가능하며 미적인 감각을 나타낼 수 있다.

• Structural Engineering and Mechanics
• /
• 제74권4호
• /
• pp.457-470
• /
• 2020

The force resisting ability of a connection has direct implications on the overall response of a timber framed structure to various actions, thereby governing the integrity and safety of such constructions. The behavior of timber framed structures has been studied by many researchers by testing full-scale-connections in timber frames so as to establish consistent design provisions on the same. However, much emphasis in this approach has been unidirectional, that has focused on a particular connection configuration, with no research output stressing on the refinement of the existing connection details in order to optimize their performance. In this regard, addition of adhesive to dowelled timber connections is an economically effective technique that has a potential to improve their performance. Therefore, a comparative study to evaluate the performance of various full-scale timber frame Nailed connections (Bridled Tenon, Cross Halved, Dovetail Halved and Mortise Tenon) supplemented by adhesive with respect to Nailed-Only counterparts under tensile loading has been investigated in this paper. The load-deformation values measured have been used to calculate stiffness, load capacity and ductility in both the connection forms (with and without adhesion) which in turn have been compared to other configurations along with the observed failure modes. The observed load capacity of the tested models has also been compared to the design strengths predicted by National Design Specifications (NDS-2018) for timber construction. Additionally, the experimental behavior was validated by developing non-linear finite element models in ABAQUS. All the results showed incorporation of adhesive to be an efficient and an economical technique in significantly enhancing the performance of various timber nailed connections under tensile action. Thus, this research is novel in a sense that it not only explores the tensile behavior of different nailed joint configurations common in timber construction but also stresses on improvising the same in a logical manner hence making it distinctive in its approach.

• Strategy21
• /
• 통권42호
• /
• pp.293-317
• /
• 2017

A series of immoral conducts are repeatedly occurring by some commanders and high-ranking officers in the ROK navy. They are seriously compromising not only harmony and solidarity of the organization, but also pride and morale of members of the service. They seem to be results of the fragile ethical background of the service as well as of failures in military education and training on ethics. This paper sees backgrounds of weak ethical foundations of the navy as follows: the enduring legacies of cultural factors, such as the toxic military culture of the Japanese colonization, dark side of mariners' traditions, the sea-aversive Confucian culture, and unique characteristics in any small organization or society, etc... This paper also suggests the current ethnic systems of the navy are primarily based on responsive measures against misdeeds, rather than fundamental prescriptions for immoral behaviors, in the absence of ethical instrument for warriors. The paper also emphasizes the importance of developing character-based leadership, founded on, above all, respects for human integrity and strong sense of honor. Moreover, the importance of accountability in charging the command, as advocated by the US navy, is also stressed in order to establish a more robust ethic ground within the navy. Based on these analyses, the author proposes that in order to become a stronger and healthier fighting force, the navy needs to make continuous command efforts and organizational innovations to improve ethic principle and moral standard of the service, to strengthen ethics of naval leaders by a robust system of ethical education and training programs, and ultimately to solidify a navy culture in which moral passions and energies are spreading over.

• 항공우주정책ㆍ법학회지
• /
• 제18권
• /
• pp.247-324
• /
• 2003

항공기술의 발달과 더불어 항공기가 날로 무기화하는 추세에 있어서 특히 세계적으로 조밀한 공역을 자랑하는 동아시아에 위치한 우리나라의 입장에 서는 북한과의 대치상황과 더불어 영공 기타 공역에 대한 대응이 현실적으로 절실한 상황이다 그러나, 현재 우리의 관련 법제는 법률적인 차원에서 이에 대한 대응을 하지 못하고, 군 내부의 관련규정에만 의존하고 있어 실제로 침범사고의 발생시에 그 처리에 있어서 많은 문제점이 제기될 가능성이 존재한다. 이 논문에서는 한반도 주변의 공역을 영공, 방공식별구역, 비행정보구역, 배타적 경제수역 상공, 접속수역 상공, 공해 상공으로 구분하여 각 공역의 특성과 이에 대한 우리의 대응조치 등을 살펴보고, 나아가 문제점을 해결하는 방안으로 관련법제의 입법방향에 대해서 검토해 보고자 한다.

• 한국중재학회지:중재연구
• /
• 제19권1호
• /
• pp.147-169
• /
• 2009

This paper deals with disputes incurred from the CISG provisions in relation with the conformity of goods with a view to finding the general way of approach made by the court and arbitration tribunal in the case laws for the interpretation of CISG based on 6(six) cases thereon. Throughout this study, it has been noted that the German Supreme Court devoted most in creating the general principle of CISG interpretation in relation with national compulsory law of regulation applicable on the conformity of goods. It was New Zealand mussels case in which the German supreme court decided that the exporting country's compulsory law of regulation would be applied in determining the conformity of goods. Furthermore, German supreme court added that CISG does not place an obligation on the exporter to supply goods, which conform to all statutory or other public provisions in force in the import state unless the same provisions exist in the export State as well, or the importer informed the exporter about such provisions existing in the import state, or the exporter had knowledge of the provisions due to special circumstances. It is stipulated in CISG that the goods conform with contract if they are fit for the purpose for which goods of the same description would ordinarily be used. When questions arise concerning matters governed by the CISG that are not expressly defined in the CISG, the question is to be settled in conformity with general principles on which the convention is based. Only when such a general principle cannot be found may the tribunal turn to other sources such as UNIDROIT Principles, Principles of European Contract Law and Lex Mercatoria, etc. Interpretation of CISG should be autonomous, in the sense that it should not depend on principles and concepts derived from any national legal system. Even where a CISG rule is directly inspired by domestic law, the court should not fall back on its domestic law, but interpret the rule by reference to the CISG with a view to its international character and to the need to promote uniformity in its application and the observance of good faith in international trade.

• 한국한의학연구원논문집
• /
• 제14권3호
• /
• pp.103-111
• /
• 2008

Recently, skin diagnosis has been suggested as a promising tool for discrimination of Sasang Constitution, reported by examining the skin characteristics such as thickness, stiffness, slip, and skin textures like wrinkles and furrows. However, the works had a limitation in that clinical decision on the skin characteristics was made by relying upon oriental medicine doctors' subjective sense of touch. In order to objectify the skin diagnosis and claim its efficacy on the discrimination of the Sasang Constitutions, it is necessary to demonstrate its discrimination capability by providing numerical values in terms of physical quantities obtained from measurements using today's sensors and equipment technologies, which motivated this work as a priliminary step towards objectification of skin diagnosis. The skin characteristics focused in this work is the slip property of the back-hand skin that has been exploited using the dynamic friction measurement system. First, curved geometric effects of the back-hand skin on the measured lateral/vertical force signals were estimated using the artificially designed silicon coated structures, which led to a suggestion on a quality controlled experimental design based upon a empirical analysis model. Second, the experimental design thus suggested has been applied to the measurement of dynamic friction coefficients for two healthy male subjects of Taeumin (TE) and Soyangin (SY), respectively. The result shows that the dynamic friction coefficient is less for the SY subject than for the TE subject around the area of the skin used for diagnosis by the oriental medicine doctor, implying the TE subject's skin is more slippery than the SE subject's that is consistent with the oriental medicine doctor's diagnosis. Hopefully, this work can provide guidelines for obtaining quality data in friction measurement to be collected for discussion on the efficacy of the skin diagnosis and its objectification through statistical analysis.

• 복식
• /
• 제58권7호
• /
• pp.13-30
• /
• 2008

Visual language is 'a form of communication without text'. Visual language is one of the strongest methods to spread knowledge. Uniforms could be interpreted as a symbolic language that establishes order in this complicated modern society by placing identity and responsibility on each members of various different organizations. In light of the above, the purpose of this research paper will be to analyze police uniforms of U.S.A, Great Britain, Italy, France and Korea as a form of visual language and interpreting them in terms of visual design in order to understand the fundamental ideas behind the designs and the effective applications thereof. Upon analysis of traffic police uniforms of each individual county mentioned above by separating each uniform's distinctive design, pattern, color, material and decoration based on visual factor, three characteristics of authority, dynamic functionality and friendliness were derived from comparing and analyzing each country's distinctive uniform design. The traditional unique role of police in our society was to maintain social order as their nature inherently possesses characteristic of authority and preservation, but has since undergone transition in many countries to appeal to the broader public by incorporating friendliness and dynamic functionality. Analyzing police uniforms in terms of visual linguistic sense requires a much more profound process of understanding beyond simple interpretation of configurative shapes. In conclusion, the true purpose of uniforms is to include and portray images of mankind's desire toward expressing ideas like 'mankind's bias toward existence beyond theirselves and the exercise of force through authority' and materializing such ideas into a physical form.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2001년도 춘계학술대회 논문집
• /
• pp.135-139
• /
• 2001

This paper describes a string resonator that is used for the interrogation system of a Fiber Bragg Grating(FBG) strain sensor. The strain on the fiber piece is calculated from the measured frequency based on that the natural frequency of a string is a function of the applied absolute strain. Existing research considered a fiber as a string, but a fiber is not a string in the strict sense due to its bending stiffness, thus the fiber should be modeled as a beam accompanied with an axial force. In the vibration modeling, the relationship between the strain and the natural frequency is derived, and then the resonance condition is described in terms of both the phase and the mode shape for sustaining resonant motion. Several experiments verify the effectiveness of the proposed model of the fiber. The performance of the string resonator is analyzed by measuring the frequency change according to the applied strains in the dynamic range of 1100$\mu\varepsilon$ referred to the displacement from capacitance sensor. From the experimental results, the implemented string resonator provides the accuracy of $\pm$3$\mu\varepsilon$, the quasi-static resolution of ~0.1$\mu\varepsilon$(rms) which amount to be $\pm$0.17$\mu\textrm{m}$ and ~6nm respectively, in case of fiber length of 56mm. For a dynamic strain, it can provide the accuracy of ~3$\mu\varepsilon$ until the frequency comes to 8Hz. As a consequence, the string resonator proposed for FBG sensor provides the high accuracy and the high resolution in strain measurement, and also it is expecting to be used, for the application, to not only strain but also displacement measuring device.

• International Journal of Precision Engineering and Manufacturing
• /
• 제6권1호
• /
• pp.51-58
• /
• 2005

The development of the high-efficiency machine-tools equipment and new cutting tool materials with high hardness, heat- and wear-resistance has opened the way to application of high-speed cutting process. The basic argument of using of high-speed cutting processes is the reduction of time and the respective increase of machining productivity. In this sense, the spindle units may be regarded as one of the most important units, directly affecting many parameters of high-speed machining efficiency. One of the possible types of spindle units for high-speed cutting is the air-bearing type. In this paper, we propose the mathematical model of the dynamic behavior of the air-bearing spindle. To provide the high-level of speed capacity and spindle rotation accuracy we need the adequate model of "spindle-bearings" system. This model should consider characteristics of the interactions between system components and environment. To find the working characteristics of spindle unit we should derive the equations of spindle axis movement under the affecting factors, and solve these equations together with equations which describe the behavior of lubricant layer in bearing (bearing stiffness equations). In this paper, the three influence coefficients are introduced, which describe the center of spindle mass displacement, angle of shaft rotation around the axes under the unit force application and that under the unit torque application. These coefficients are operated in the system of differential equations, which describes the spindle axis spatial movement. This system is solved by Runge-Kutta method. Obtained trajectories and amplitude-frequency characteristics were then compared to experimental ones. The analysis shows good agreement between theoretical and experimental results, which confirms that the proposed model of air-bearing spindle is correctis correct

• 대한기계학회논문집A
• /
• 제39권10호
• /
• pp.995-999
• /
• 2015

자기유도(inductive) 센서는 원리가 간단하고 경제적이어서 변위, 힘, 압력 등 다양한 물리량 측정에 사용된다. 본 논문에서는 고리 모양의 강판과 코일로 이루어진 간단한 구조의 자기유도 센서를 제안하였다. 센서의 인덕턴스를 자기회로 방법을 이용하여 추정하고 유한요소 해석을 통해 검증하였다. 고리의 고유 진동수를 Castigliano 정리와 등가 질량 방법을 이용하여 추정하고 실험 및 유한요소 해석을 통해 검증하였다. 기계적 진동에 영향을 주지 않도록 센서의 가진 주파수를 결정하였으며, 구동 및 신호처리 회로를 설계하여 센서를 제작하였다. 제작된 자기유도 센서를 유연관 내부의 유체 압력을 비침습적으로 측정하는데 활용하였다. 압력과 센서 출력 간의 관계를 이차식 형태로 표현하면 2% 이내의 정확도로 압력을 측정할 수 있어 압력 센서로서의 가능성을 확인하였다.