1 |
Hassan, R., Ibrahim, A. and Ahmad, Z. (2012), "Experimental performance of mortice and tenon joint strengthened with glass fibre reinforced polymer under tensile load", IEEE Symposium on Business, Engineering and Industrial Applications (ISBEIA), Bandung, Indonesia, September. https://doi.org/10.1109/isbeia.2012.6423013.
|
2 |
Hindman, D and Milad, M. (2016), "Splitting strength of mortise members in timber frame joints", J. Mater. Civil Eng., 28(12). https://doi.org/10.1061/(ASCE)MT.1943-5533.0001664.
|
3 |
IS:1708 (2005), Methods of Testing Clear Specimens of Timber, Indian Standards Institution, New Delhi, India.
|
4 |
Johansen, K.W. (1949), "Theory of timber Connections", International Association for Bridge and Structural Engineering, 9, 249-262.
|
5 |
Judd, J.P., Fonseca, F.S., Walker, C.R., and Thorley, P.R. (2012), "Tensile strength of varied-angle mortise and tenon connections in timber frames", J. Struct. Eng., 138(5),636-644. https://doi.org/10.1061/(ASCE)ST.1943-541X.0000468.
DOI
|
6 |
Kessel, M.H. and Augustin, R. (1995), "Load behavior of connections with peg", Timber Framing, 38, 6-9 and 39, 8-10.
|
7 |
Larsen, H. J. and Reestrup, V. (1969), "Tests on screws in wood", Bygningsstatiske Meddelelser, 1, 3-36.
|
8 |
Mack, J.J. (1960), "The strength of nailed timber joints", CSIRO Division of Forest Products, TechNo. 9.
|
9 |
Miller, J.F. and Schimdt, R.J. (2004), "Capacity of pegged mortise and tenon joinery", Report No. 50272; Timber Frame Business Council, Hamilton, MT, Timber Framers Guild, Becket, MA and University of Wyoming, Laramie, WY.
|
10 |
Moller, T. (1950), "New method of estimating the bearing strength of nailed wood connections" Report No. 117; Gothenburg, Sweden.
|
11 |
NDS (2018), National design specification for wood construction, American Wood Council, Virginia, U.S.
|
12 |
Schmidt, R.J. and Daniels, C.E. (1999), "Design considerations for mortise and tenon connections", Report No. 9702896; USDA, NRI/CGP Washington DC and Timber Frame Business Council, New Hampshire, U.S.
|
13 |
Shanks, J.D., Chang, W.S. and Komatsu, K. (2008), "Experimental study on mechanical performance of all-softwood pegged mortice and tenon connections", Biosyst. Eng., 100, 562-570. https://doi.org/10.1016/j.biosystemseng.2008.03.012.
DOI
|
14 |
Siimes, F.E., Johanson, P.E. and Niskanen, E. (1954), "Investigations on the ultimate embedding stress and nail holding power of finish pine", The State Institute for Technical Research, Helsinki, Finland.
|
15 |
Walker, C.R., Fonseca, F.S., Judd, J.P. and Thorley P.R. (2008), "Tensile capacity of timber-framed mortise and tenon connections", M.S. Dissertation, Brigham Young University, Utah, U.S.A.
|
16 |
Wilkinson, T. L. (1972), "Analyses of nailed joints with dissimilar members", J. Struct. Division, American Society of Civil Engineers, 98(ST9), 9189.
DOI
|
17 |
Williams, M., Mohammad, M., Alexander, S. and Pierre, Q. (2008), "Determination of yield point and ductility of timber assemblies: In search for a harmonised approach", 10th WCTE, Japan, June.
|
18 |
Aune, P. (1966), The Load Carrying Capacity of Nailed Joints. Calculations and Experiments, The Norwegian Institute of Technology, Norway.
|
19 |
ABAQUS User Manual v 6.13, Dassault Systemes Simulia, Johnston, RI.
|
20 |
ASTM F1575 (2017), Standard Test Method for Determining Bending Yield Moment of Nails, ASTM International, Pennsylvania, U.S.A. https://doi.org/10.1520/f1575-01
|
21 |
Aune, P. and Patton-Mallory, M. (1986), Lateral Load-Bearing Capacity of Nailed Joints Based on the Yield Theory: Theoretical Development, Vol. 469, US Department of Agriculture, Forest Service, Forest Products Laboratory, U.S.A.
|
22 |
Brungraber, R.L. (1985), "Traditional timber joining: A modern analysis", Ph.D. Dissertation, Stanford University, California, U.S.A.
|
23 |
Dorn, M., Borst, K.D. and Eberhardsteiner, J. (2013), "Experiments on dowel-type timber connections", Eng. Struct., 47, 67-80. http://dx.doi.org/10.1016/j.engstruct. 2012.09.010.
DOI
|
24 |
Bulleit, W.M., Sandberg, L.B., Drewek, M.W. and O'Bryant, T.L. (1999), "Behavior and modelling of wood-pegged timber frames", J. Struct. Eng., 125(1), 18707. https://doi.org/10.1061/(asce)0733-9445(1999)125:1(3).
|
25 |
Burnett, D.T., Clouston, P., Damery, D.T. and Fisette, P. (2003), "Structural properties of pegged timber connections as affected by end distance", Forest Products J., 53(2), 50-57.
|
26 |
Church, J.R. and Tew, B.W. (1997), "Characterisation of bearing strength factors in pegged timber connections", J. Struct. Eng., 123, 326-332. https://doi.org/10.1061/(asce)0733-9445.
DOI
|
27 |
Eckelman, C.A., Haviarova, E. and Akcay, H. (2006), "Exploratory study of the withdrawal resistance of round mortise and tenon joints with steel pipe cross pins", Forest Products J., 56(11/12).
|