• International Journal of Control, Automation, and Systems
• /
• 제2권2호
• /
• pp.238-246
• /
• 2004

In displaying a virtual wall using a passive haptic device equipped with passive actuators such as electric brakes, unsmooth motion frequently occurs. This undesirable behavior is attributed to time delay due to slowness in the virtual environment update and force approximation due to the inability of a brake to generate torque in arbitrary directions. In this paper a new control scheme called direct control is proposed to achieve smooth display on the wall-following task with a passive haptic device. In direct control, brakes are controlled so that the normal component of a resultant force at the end-effector vanishes, based on the force analysis at the end-effector of the passive haptic device using the passive FME (Force Manipulability Ellipsoid). Various experiments have been conducted to verify the validity of the direct control scheme with a 2-link passive haptic system.

• 대한산업공학회지
• /
• 제42권2호
• /
• pp.86-95
• /
• 2016

We propose a new approach to the stochastic version of Lanchester model. Commonly used approach to stochastic Lanchester model is through the Markov-chain method. The Markov-chain approach, however, is not appropriate to high dimensional heterogeneous force case because of large computational cost. In this paper, we propose an approximation method of stochastic Lanchester model. By matching the first and the second moments, the distribution of each unit strength can be approximated with multivariate normal distribution. We evaluate an approximation of discrete Markov-chain model by measuring Kullback-Leibler divergence. We confirmed high accuracy of approximation method, and also the accuracy and low computational cost are maintained under high dimensional heterogeneous force case.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.78-85
• /
• 2002

The wavelet transform is a popular tool fer studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• Journal of Ship and Ocean Technology
• /
• 제4권1호
• /
• pp.21-27
• /
• 2000

The slamming force occurring in the free fall impact of cylindrical bodies on the water surface is analyzed in both compressible and incompressible stages. In the compressible phase the hydrodynamic analysis is carried on by the acoustic approximation, obtaining a closed form expression for the maximum impact force. The incompressible analysis is approached through and unsteady boundary element method to compute the free surface evolution and the slamming force on the body. A similar behavior seems to characterize the maximum slamming force versus a dimensionless mass parameter.

• 한국국방경영분석학회지
• /
• 제18권2호
• /
• pp.96-113
• /
• 1992

A time-varying nonhomogeneous poisson process approximation of the nonexponential stochastic Lanchester model is defined and evaluated over a range of combat parameters including initial force sizes. breakpoints. and interkilling random variables. The proposed approximation is far excellent and takes much less CPU time than the existing models. The sensitivity analysis was peformed to evaluate the efficiency of the proposed model and three recommended factors are suggested to guide the combat operators.

• 한국기계가공학회지
• /
• 제1권1호
• /
• pp.29-37
• /
• 2002

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the diagnosis of grinding conditions in grinding process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. STD11 workpiece was 85 times of machined pieces cut by the WA wheel and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At dressing time, the approximation signals were slowly increased and 45 machined times noticed dressing time.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2002년도 춘계학술대회 논문집
• /
• pp.1063-1066
• /
• 2002

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 한국기계가공학회지
• /
• 제9권5호
• /
• pp.1-6
• /
• 2010

The wavelet transform is a popular tool for studying intermittent and localized phenomena in signals. In this study the wavelet transform of cutting force signals was conducted for the detection of a tool failure in turning process. We used the Daubechies wavelet analyzing function to detect a sudden change in cutting signal level. A preliminary stepped workpiece which had intentionally a hard condition was cut by the inserted cermet tool and a tool dynamometer obtained cutting force signals. From the results of the wavelet transform, the obtained signals were divided into approximation terms and detailed terms. At tool failure, the approximation signals were suddenly increased and the detailed signals were extremely oscillated just before tool failure.

• 대한토목학회논문집
• /
• 제10권3호
• /
• pp.7-17
• /
• 1990

본 연구에서는 트러스구조와 아치구조의 부재단면적 및 기하형상을 동시에 최적화하는 효율적인 근사화 방법을 제안하고자 한다. 설계과정 중, 트러스구조에 대해서는 응력제약조건 및 좌굴응력제약조건을 만족하도록 하고, 아치구조에 대해서는 조합응력 제약조건을 만족하도록 하였다. 최적화에 필요한 구조해석의 수를 줄이기 위해 Force Approximation Method를 사용하였다. 초기치에 대한 유한요소해석이 수행된 다음 설계변수인 부재단면적과 절점좌표들에 대한 부재단면력들의 경사를 계산하였고, 그 경사정보를 이용 부재단면력들의 1차 Taylor급수 전개에 근거를 둔 근사구조 해석을 형성하였다. 이동한계법을 적용하였으며, 근사구조해석으로 부터 얻어진 정보에 의해 구조물의 체적을 최소화 하였다. 형상최적화를 위한 제안된 본 방법의 효율성과 신뢰성을 보이기 위해 수치예를 들어 다른 방법들에 의한 결과와 비교하였다. 그 결과 구조해석의 수를 크게 감소시킬 수 있었으며, 구조물 형상최적화에 매우 효율적으로 적용될 수 있음을 알게 되었다.

• Structural Engineering and Mechanics
• /
• 제20권3호
• /
• pp.313-334
• /
• 2005

The paper presents a new approach for the analysis of slope stability that is based on the numerical solution of a differential equation, which describes the thrust force distribution within the potential sliding mass. It is based on the evaluation of the thrust force value at the endpoint of the slip line. A coupled approximation of the slip and thrust lines is applied. The model is based on subdivision of the sliding mass into slices that are normal to the slip line and the equilibrium differential equation is obtained as the slice width approaches zero. Opposed to common iterative limit equilibrium procedures the present method is straightforward and gives an estimate of slope stability at the value of the safety factor prescribed in advance by standard requirements. Considering the location of the thrust line within the soil mass above the trial slip line eliminates the possible development of a tensile thrust force in the stable and critical states of the slope. The location of the upper boundary point of the thrust line is determined by the equilibrium of the upper triangular slice. The method can be applied to any smooth shape of a slip line, i.e., to a slip line without break points. An approximation of the slip and thrust lines by quadratic parabolas is used in the numerical examples for a series of slopes.