• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.20 no.6
• /
• pp.709-717
• /
• 2007

This paper discussed on the effect of an intermediate support on the stability of a beam resting on elastic foundation subjected to follower force. The stability and dynamic responses of a beam resting on elastic foundation subjected to follower force are analyzed based on the finite element method. The dynamic responses of the system are studied by the mode superposition method to observe the damping rate of the motion. The beam resting on elastic foundation subjected to follower force loses its stability by flutter type or divergence type, depending on the location of the intermediate support.

• Journal of Mechanical Science and Technology
• /
• v.17 no.12
• /
• pp.1949-1960
• /
• 2003

This paper presents vibration and noise control of flexible structures using squeeze mode electro-rheological mounts. After verifying that the damping force of the ER mount can be controlled by the intensity of the electric fild, two different types of ER squeeze mounts have been devised. Firstly, a small size ER mount to support 3 kg is manufactured and applied to the frame structure to control the vibration. An optimal controller which consists of the velocity and the transmitted force feedback signals is designed and implemented to attenuate both the vibration and the transmitted forces. Secondly, a large size of ER mount to support 200 kg is devised and applied to the shell structure to reduce the radiated noise. Dynamic modeling and controller design are undertaken in order to evaluate noise control performance as well as isolation performance of the transmitted force. The radiated noise from the cylindrical shell is calculated by SYSNOISE using forces which are transmitted to the cylindrical shell through two-stage mounting system.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.12 no.2
• /
• pp.175-181
• /
• 2009

All of the military aircrafts in Korea Air Force are administered and operated together in the same system regardless of whether they are equipped with the data communication capability or not. The absence of the data communication capability in some of the aircrafts might increase whole kill chain hour at the point of the Network Centric Warfare achievement. Network synergy effects cannot also be desired if the section which is not connected to the network influences to the whole tactical network. Equipping aircrafts with the data communication capability could be done by upgrading the aircrafts, but resulting in high costs and long updating time. This paper is a research about the design and implementation of the UMPC based Data Link System to aircrafts that do not have the data communication capability. The proposed system grafts the UHF-based wireless modem technology and the aircraft flight mission support software onto the off-the-shelf UMPC and GPS system. The employed UHF radio equipment allows communicating tactic data with another aircrafts on the air, the ground control point, and even the Tactical Air Control Party(TACP) control vehicle that achieve missions with aircrafts. It thereby increases such capabilities as navigation aid, situation awareness, quick target identification and attack. We also applied Closed Air Support(CAS) scenarios, which is very close to the real environment, to the experiments of the proposed system. The experimental results show that the proposed system could support the data communication capability effectively and the flight mission at low costs of money and time.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 1998.04a
• /
• pp.454-460
• /
• 1998

The vibration behavior of fuel rods has been analyzed by FEM in consideration of axial force and support spring constants. The axial compression force on the fuel rod in reactor decreases with the fuel rod burnup, and its decrease makes the natural frequencies of fuel rod considerably increase. The change of support spring constant can contribute to the remarkable change of the mode shapes, but not greatly to the natural frequencies. The reaction forces of support springs are obtained from normalizing the lst mode with the max. 0.2 mm displacement. The calculated reaction forces are larger than the previous results obtained by disregarding the deflections of the support springs.

• Human Ecology Research
• /
• v.53 no.1
• /
• pp.49-66
• /
• 2015

This study analyzes the effects of women's labour force participation and work-family reconciliation support on life-cycle fertility in Korea. The analysis is based on the longitudinal data from Korean Labour and Income Panel Study (KLIPS), which include the available information on life-cycle fertility and employment history. Employing a dynamic model of fertility, we estimated the life-cycle fertility of all the 15-49 years old women considered in this study by using a duration model. The major results of this study were as follows: First, women's labour force participation had a negative effect on the first birth, second birth, and all births (transition to births starting at different parities). Women's employment tended to lengthen the interval between births. Second, the availability of maternal leave had a positive effect on the first birth and all births for working women. Providing maternal leave to working women decreased the opportunity cost of childbearing and in turn, reduced the interbirth interval of women. However, the availability of parental leave had no significant effect on the births of working women. Third, the financial support for childcare had a positive effect on the first birth and all births. The economic support for childcare led to the reduction in the interbirth interval of women by increasing the probability of births. The use of a childcare center for the first child, which substitutes for the time that women needed to take care of their children, classified as time-intensive consumption goods, did not have any effect on the second birth. Fourth, the part-time employment of women had a positive effect on the second birth. A flexible working time schedule tended to decrease the interval between the first and the second births.

• Structural Monitoring and Maintenance
• /
• v.10 no.3
• /
• pp.261-281
• /
• 2023

Magnetic flux sensors are commonly used in monitoring the cable force, but the application of the sensors in large diameter non-closed Galfan cables, as those adopted in Yueqing Gymnasium which is located in Yueqing City, Zhejiang Province, China and is the largest span hybrid space structure in the world, is seldom done in engineering. Based on the construction of Yueqing Gymnasium, this paper studies the cable tension monitoring using the magnetic flux method across two stages, namely, the pre-calibration stage before the cable leaves the rigging factory and the field tension formation stage of the cable system. In the pre-calibration stage in the cable factory, a series of 1:1 full-scale comparative tests were carried out to study the feasibility and relability of this kind of monitoring method, and the influence on the monitoring results of charging and discharging voltage, sensor location, cable diameter and fitting method were also studied. Some meaningful conclusions were obtained. On this basis, the real-time cable tension monitoring system of the structure based on the magnetic flux method is established. During the construction process, the monitoring results of the cables are in good agreement with the data of the on-site pressure gauge.The work of this paper will provide a useful reference for cable force monitoring in the construction process of long-span spatial structures.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.46 no.4
• /
• pp.263-271
• /
• 2023

In the (3,3) close combat model based on the Lanchester Square Law, this study proposes a plan to optimally allocate residual combat power after the battle to other battlefields. As soon as the two camps of three units can grasp each other's information and predict the battle pattern immediately after the battle began, the Time Zero Allocation of Force (TZAF) scenario was used to initially allocate combat power to readjust the combat model. It reflects travel time, which is a "field friction" in which physical distance exists from battlefields that support combat power to battlefields that are supported. By developing existing studies that try to examine the effect of travel time on the battlefield through the combat model, this study forms a (3,3) combat model, which is a large number of minimum units. In order to achieve the combat purpose, the principle of optimal combat force operation is presented by examining the aspect that support combat power is allocated to the two battlefields and the consequent battle results. Through this, various scenarios were set in consideration of the travel time and the situation of the units, and differentiated results were obtained. Although the most traditional, it can be used as the basic logic of the training or the commander's decision-making system using the actual war game model.

• International Journal of Precision Engineering and Manufacturing
• /
• v.4 no.6
• /
• pp.38-43
• /
• 2003

In this study, the optimal dynamic absorbing system for the gas operated HIF (high implusive force) device has been investigated. For this purpose, firstly, the dynamic behavior of human body induced by impulsive disturbances has been analyzed through a series of experimental works using the devised test setup. The characteristics of linear impulse has been compared under some conditions of support system. In order to design the optimal dynamic absorbing system, the parameter optimization process has been performed based on the simplified isolation system model under constraints of moving displacement and transmitted force. Finally, the performance of the designed dynamic absorbing system has been evaluated by simulation in the actual operating condition.

• Journal of Information Technology Applications and Management
• /
• v.11 no.3
• /
• pp.89-116
• /
• 2004

Insurance companies are in a fierce race to catch a new customer. In this situation. sales force automation technologies are often used to support customer relationship management strategies. This study sets out a research model predicting SFA(Sales Force Automation) usage through theoretical studies. Survey data were collected from 145 salespeople across 2 firms that had implemented sales force automation tools and hypotheses were tested empirically. Data were analyzed by path-analysis method of AMOS. The major findings of this study are as follows: Computer self-efficacy, user involvement and voluntariness have a statistically significant influence on the positive perceptions of SFA. These perceptions have a statistically significant influence on user satisfaction and usage of SFA. while user satisfaction has a statistically significant influence on SFA usage. This paper concludes with the discussion of these results and their implications for academic researchers and insurance company managers.

• The Journal of Korea Robotics Society
• /
• v.17 no.2
• /
• pp.152-158
• /
• 2022

As various mobile robots and manipulator robots have been commercialized, robots that can be used by individuals in their daily life have begun to appear. With the development of robots that support daily life, the interaction between robots and humans is becoming more important. Manipulator robots that support daily life must perform tasks such as pressing buttons or picking up objects safely. In many cases, this requires expensive multi-axis force/torque sensors to measure the interaction. In this study, we introduce a low-cost two-axis pressure sensor that can be applied to manipulators for education or research. The proposed system used three force sensitive resistor (FSR) sensors and the structure was fabricated by 3D printing. An experimental device using a load cell was constructed to measure the biaxial pressure. The manufactured prototype was able to distinguish the +-x-axis and the +-y-axis pressures.