• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.7
• /
• pp.1103-1108
• /
• 2005

A new type of surimi gel was prepared by adding the crab paste to the original Alaska pollock surimi, and its characteristics were determined. With increased addition of crab paste to the surimi, moisture $(81.3\;to\;79.1\%)$ and protein content $(12.2\;to\;11.6\%)$ of surimi gels slightly decreased while ash content increased compared to commercial surimi gel. Color values of surimi gels were decreased in lightness (L value, 67.3 to 63.5) but increased in redness (a value, -3.5 to 7.14). Thus, crab paste-added surimi gel was a little darked reddish product. Maximum values of breaking force and deformation of $10\%$ added surimi gel were 568g and 13.1mm, respectively. Sensory scores on color and flavor increased according to the increasing of additional ratios, whereas texture scores was maximum at $10\%$ added surimi gel. From the results of physical properties and sensory evaluation, desirable additional ratio was $10\%$. Total amino acid content (11,435 mg/100g) of $10\%$ added surimi gel was approximately $5\%$ less than non-added surimi gel, and major amino acids were aspartic acids, glutamic acid, leucine and lysine. Exceptionally, cysteine content of $10\%$ added surimi gel was 2 times higher than control (surimi gel without crab paste). Calcium and phosphorus contents of $10\%$ crab paste-added surimi gel were 172:4mg/l00g and 234.6 mg/100g, respectively, and their ratio (1:1.4) was in the optimal range in the body absorbtion efficiency.

• Progress in Medical Physics
• /
• v.23 no.4
• /
• pp.269-278
• /
• 2012

Aquaplast Thermoplastic (AT) is a tissue-equivalent oral compensator that has been developed to improve dose uniformity at the common boundary and around the treated area during radiotherapy in patients with head and neck cancer. In order to assess the usefulness of AT, the degree of improvement in dose distribution and physical properties were compared to those of oral compensators made using paraffin, alginate, and putty, which are materials conventionally used in dental imprinting. To assess the physical properties, strength evaluations (compression and drop evaluations) and natural deformation evaluations (volume change over time) were performed; a Gafchromic EBT2 film and a glass dosimeter inserted into a developed phantom for dose verification were used to measure the common boundary dose and the beam profile to assess the dose delivery. When the natural deformation of the oral compensators was assessed over a two-month period, alginate exhibited a maximum of 80% change in volume from moisture evaporation, while the remaining tissue-equivalent properties, including those of AT, showed a change in volume that was less than 3%. In a free-fall test at a height of 1.5 m (repeated 5 times as a strength evaluation), paraffin was easily damaged by the impact, but AT exhibited no damage from the fall. In compressive strength testing, AT was not destroyed even at 8 times the force needed for paraffin. In dose verification using a glass dosimeter, the results showed that in a single test, the tissue-equivalent (about 80 Hounsfield Units [HU]) AT delivered about 4.9% lower surface dose in terms of delivery of an output coefficient (monitor unit), which was 4% lower than putty and exhibited a value of about 1,000 HU or higher during a dose delivery of the same formulation. In addition, when the incident direction of the beam was used as a reference, the uniformity of the dose, as assessed from the beam profile at the boundary after passing through the oral compensators, was 11.41, 3.98, and 4.30 for air, AT, and putty, respectively. The AT oral compensator had a higher strength and lower probability of material transformation than the oral compensators conventionally used as a tissue-equivalent material, and a uniform dose distribution was successfully formed at the boundary and surrounding area including the mouth. It was also possible to deliver a uniformly formulated dose and reduce the skin dose delivery.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.1
• /
• pp.117-123
• /
• 2010

Tooth eruption is the movement of the tooth from the developing place in the alveolar bone to the functional position in the oral cavity. The permanent incisors originate from the dental lamina on the lingual side of preceding deciduous tooth and erupt to the level of the occlusion through the well developed gubernacular cord. Ectopic eruption is a developmental disturbance in the eruption pattern of the permanent dentition. Most of the ectopically erupted lower incisor has been found in lingual side. The ectopically erupted tooth could be repositioned by orthodontic force in the early mixed dentition, which could help preventing the problems of loss of space and the lingual tilting of the lower anterior teeth. An eight-year-old girl visited the department of pediatric dentistry, Yonsei Dental University Hospital, for the evaluation and the treatment of the lower right lateral incisor, which was horizontally erupted in the lingual side, parallel to the mouth floor. Her tongue was placed on the labial side of that tooth. There was no previous dental history of dental caries or trauma on the pre-occupied primary incisor. Clinical and radiographic examinations including the computed tomography(CT), showed no evidence of dilacerations on root. Therefore, we decided to start active orthodontic traction of the lower right lateral incisor. We designed the fixed type of buccal arch wire and the lip bumper with hook for the traction. Button was attached to the lingual side of the ectopically positioned tooth. Elastic was used between the appliance and the button on that tooth. After the tooth become upright over the tongue level, appliance was change to the removable type and periodic check-up with occlusal guidance was followed to monitor the position of the tooth. In this case using the fixed appliance with modified form of lip bumper and hook embedded in acrylic part instead of extraction was very efficient up-righting the ectopically erupted tooth toward the occlusal plane.

• Journal of Animal Science and Technology
• /
• v.46 no.2
• /
• pp.217-226
• /
• 2004

This study was canied out to evaluate the quality characteristics of the fermented pork with Korean traditional seasonings. The samples, outside muscle of pork ham were cut to cube(7 ${\times}$ 12 ${\times}$ 2cm) and five Korean traditional seasonings such as garlic paste(TI), pickled Kimchi(T2), pickled Kimchi juice(T3), soybean paste(T4), red pepper paste(T5) were seasoned by the proportions of meat to seasonings(1 : 1). The seasoned samples were fennented at - 1 ${\pm}$ 1$^{\circ}C$ for 20 days. According to proximate composition analysis, all pork samples contained protein 20 ${\sim}$ 22%, fat 3 ${\sim}$ 5%, moisture 64 ${\sim}$ 70% and ash 1.8 ${\sim}$ 2.0%. However, T5 had high crude fat level and relatively low moisture content. The highest pH among treatments was shown in TI whereas T3 showed the lowest. Water holding capacity(WHC) of T4 and T5 were higher, while those values were lower in T3 compared with other treatment. Shear force value was the highest in T5, while it was the lowest in T4. TBARS value of T3 was the highest, while that was the lowest in T4. Moreover the highest VBN value was observed in T4 due to fermentation of soy protein. However, the lowest VBN value shown in Tl indicated the inhibition of protein degradation by the garlic. The highest saccarinity was shown in T5 but it was the lowest of in T3. Salinity was shown to be high in T2 and low in T5. $L^*$ values of T4 was higher both at the surface and inner side of samples than the others but T5 showed the lowest value. T2 showed the highest $a^*$ value but T4 and T5 showed the lowest. In the result of sensory evaluation for cooked meat, T5 had the highest score in all item including overall acceptability, while T4 had the lowest score. Unsaturated fatty acid(UFA) ratio of T5 and n were 72.16 and 69.93 respectively, and the ratio of UFA/Saturated fatty acid(SFA) were higher in the order of T5 >T4> T3 >Tl >T2. Overall quality characteristics were higher in the order of T5 >T2 >Tl >T4 >T3.

• Journal of Animal Science and Technology
• /
• v.46 no.5
• /
• pp.859-870
• /
• 2004

This study was conducted to investigate physico-chemical changes of pork prepared by Korean traditional 3 types seasoning such as soybean sauce(Tl); garlic sauce(T2); red pepper sauce(T3). The seasoned samples were aged at 0 ${\pm}$ $1^{\circ}C$ for 30 days. The results obtained were as follows; Salinity(%) and saccharinity(%) of sauce were significantly decreased(P<0.05) among the all treatments during aging periods, whereas fermented meats were significantly increased(P<0.05). pH of sauce and fermented meat were tended to increased as aging period. Water-Holding Capacity(WHC) and shear force of fermented meat increased(P<0.05) among the all treatments at 20 days of storage, and decreased after that period. In color, $L^* and b^* value of T3 were lower, while a^*$ value was higher than other treatments during aging period. Volatile Basic Nitrogen(YBN) value of all treatments were increased(P<0.05) after 20 days of storage. YBN value of T3 was significantly higher(P<0.05) compared with other treatments. Thiobarbituric Acid Reactive Substances(TBARS) was rapidly increased until 10 days of storage and somewhat decreased up to 20 days after 10 days in all treatments, it was re-increased after 20th days. T3 showed the highest TBARS among the all treatment groups. Total bacterial and Lactobacilli spp. were significantly increased(P<0.05) in all treatments at 10 days of storage and decreased after that period, however it tended to increased at 30 days of storage. In sensory evaluation, overall acceptability in all treatments were increased after 20 days of storage compared to initial storage and it score was similar thereafter.

• Food Science of Animal Resources
• /
• v.27 no.4
• /
• pp.475-481
• /
• 2007

A total of 40 Korean native pigs (gilt 21, boar 19) were used to investigate the meat quality, nutritional and sensory properties by gender. Gilts had significantly lower moisture and ash contents (%) than boars, but protein contents were not significantly different between the gender (p<0.05). Gilts contained high intramuscular fat contents were significantly lower in Warner-Bratzler shear force (WBS) and Water holding capacity (WHC) when compared to those of boars. There was no significant difference in meat color L (lightness) and a (redness) values between the gender (p>0.05), but gilt had higher b (yellowiness) values than boar. Regarding amino acid compositions, there were glutamic acid (3.25%), aspartic acid (1.94%) lysine (1.83%), leucine (1.77%), alanine (1.17%) and arginine (1.15%) for gilts and boars. There were no significant differences in the contents of the minerals such as calcium, potassium, phosphorous, sodium, magnesium, iron, zinc and copper (p>0.05). The results of fatty acid composition showed that gilts had significantly higher C16:1n7, C18:1n9, in intramuscular fat., whereas they had significantly higher contents of C14:0, C16:0, C20:1n9, C20:5n3 in subcutaneous fat than boars (p<0.05). Boars had significantly higher contents of C18:0, C18:1n7, C18:2n6, C20:1n9, C20:4n6, C22:4n6 in intramuscular fat and they had significantly higher contents of C18:2n6, C22:4n6 than gilts in subcutaneous fat (p<0.05). In sensory evaluation, gilts had significantly higher scores in juiciness, tenderness and flavor when compared to boars (p<0.05).

• Food Science of Animal Resources
• /
• v.30 no.3
• /
• pp.495-503
• /
• 2010

Analyses were conducted to estimate the effect of quality grade on the carcass characteristics, physico-chemical and sensory traits of Longissimus dorsi in Hanwoo. A total of 42,113 carcasses were selected on the basis of five quality grades (grade $1^{++}$, $1^+$, 1, 2, and 3) and an additional 258 samples of Longissimus dorsi were used to evaluate the beef quality. The increase in quality grade from grade 3 to grade $1^{++}$ was significant (p<0.05) for carcass weight (from 338.7 kg to 387.2 kg), backfat thickness (from 7.45 mm to 12.23 mm) and marbling score (from 1.09 to 8.31). In contrast, significantly decreased levels of meat color, fat color, texture and maturity were apparent with increasing quality grade (p<0.05). Increasing quality grade was also correlated with significant increases (p<0.05) in crude fat contents (from 3.57% to 25.68%) and water holding capacity (from 52.41% to 58.03), and a decrease of the Warner-Bratzler shear force from 8.29 kg to 2.83 kg. The highest $L^*$ value (41.53) and highest cooking loss (22.11%) were observed with grade $1^{++}$ and 3 beef, respectively. There was no difference observed on $pH_{24}$ (5.53 to 5.66) among the quality grades, which were within the normal range. Sensory evaluation experiments revealed that quality grades were associated with significantly altered (all p<0.05) tenderness, juiciness, flavor, and overall acceptability. The crude fat contents showed significant correlation with juiciness (r=0.59), tenderness (r=0.71), flavor (r=0.55), and overall acceptability (r=0.69). The lower sensory trait scores were related to higher WBs. Grade $1^+$ Hanwoo beef had a significantly higher WBs and lower fat contents when compared to grade $1^{++}$ Hanwoo beef (p<0.05).

• Journal of agriculture & life science
• /
• v.46 no.6
• /
• pp.105-115
• /
• 2012

The detailed proximate, fatty/amino acid, mineral composition, texture, color, chemical and taste compounds of six oysters (four kinds of cultured oysters and two kinds of wild oysters) in Korea were investigated. Length and weight of the shell removed cultured and wild oysters were 4.7~5.1 and 3.0~4.2 cm, and 5.9~9.1 and 2.6~5.5 g, respectively. The proximate compositions were not significantly different between cultured and wild oysters. Amino nitrogen and volatile basic nitrogen content of these ones were 232.8~258.2 and 160.5~213.9 mg/100 g, 9.5~12.0 and 7.8~9.5 mg/100 g, respectively. As a texture characteristic of muscle, shearing force were 95~114 and 105~132 g. Amounts of total amino acids of cultured and wild oysters were 9,004~10,198 and 8,165~8,942 mg/100 g, respectively. Major amino acids and inorganic ions were aspartic acid, glutamic acid, proline, alanine, leucine, phenylalanine, lysine, arginine and K, Na, Ca, Fe, S, P, Zn. Major fatty acids of these ones were 16:0, 18:0, 16:1n-9, 18:1n-9, 22:1n-9, 16:4n-3, 20:5n-3 and 22:6n-3, and there was little difference between the two groups. Amounts of free amino acids of cultured and wild oysters extracts were 1,444~1,620 and 1,017~1,277 mg/100 g, respectively, and major ones were taurine, glutamic acid, glycine, alanine, tryptophan, ornithine and lysine. There is a little difference in glycine, tryptophan, ornithine and arginine contents, but TMAO and TMA contents were low in amount, and were not significantly different between the two groups.

• The Journal of Korean Society for Radiation Therapy
• /
• v.30 no.1_2
• /
• pp.35-40
• /
• 2018

Purpose : The range of force differs from the size of proton energy used in our hospital. The compensator enables to change energy size based on distal thickness which also makes changes in dose rate. Therefore, the purpose of this study is to evaluate the effect of changing the thickness of compensator distal on dose range and beam on time. Subject and Methodology : Five low energy patients who have received proton therapy were selected as subjects for this study. Beam on was checked for the selected patients during the existing therapy. After then, the thickness of distal of compensator was increased by 2 cm up to 14 cm through proton therapy plan system(TPS) for comparative analysis. For the evaluation of dose range, the value of the target's conformity index(CI) and the maximum dose of rear side target's organ at risk(OAR) were compared. Furthermore, to evaluate the effect of therapy time, beam on time was compared by making compensator distal in each thickness. Result : The result of homogeneity index and conformity index of the increased compensator distal showed the same level in all patients. The comparison results of OAR of target rear side showed 7 cGy at spine cord of abdomen at maximum, 88 cGy at eyeball's RT lens, 391 cGy at RT lens of nasal cavity 51 cGy at trachea of the mediastinum, and 661 cGy at a small bowl of the pelvis. The comparison results of the beam on time showed a reduction from 126 seconds to 62 seconds for the abdomen, from 105 seconds to 37 seconds for the eyeball, from 187 seconds to 134 seconds for nasal cavity, from 100 seconds to 40 seconds for mediastinum, from 440 seconds to 118 seconds for the pelvis. Conclusion : The research result showed that as the distal thickness of compensator increased, the size of energy increased. In addition, beam on decreased due to the increase of dose rate. It is expected that the result would help reduce the treatment time and increase the convenience of patients if it is applied to liver patients who need respiratorygated therapy and pediatric patients. However, distal penumbra increased as the size energy increased. Therefore, in treating cases where OAR is in the vicinity of the target rear side, the influence of penumbra should be taken into account in adjusting thickness level of the compensator in proton therapy plan.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.5A
• /
• pp.407-415
• /
• 2010

In Korea, more than 90% of the total number of steel bridges built for 40~70 m span length is a steel box-girder bridge type. A steel box-girder bridge is suitable for long span or curved bridges with outstanding flexural and torsional rigidity as well as good constructability and safety. However, a steel box-girder bridge is uneconomical, requiring many secondary members and workmanship such as stiffeners and ribs requiring welding attachments to flanges or webs. Therefore, in US and Japan, a plate girder bridge, which is relatively cheap and easy to construct is generally used. One type of the plate girder bridge is the two- or three-main girder plate bridge, which is a composite plate girder bridge that minimizes the number of required main girders by increasing the distance between the adjacent girders. Also, for the simplification of girder section, the stiffener which requires attachment to the web is not required. The two-main steel girder plate bridge is a representative type of plate girder bridges, which is suitable for bridges with 10 m effective width and has been developed in the early 1960s in France. To ensure greater safety of two- or three-main girder plate bridges, a larger steel section is used in the bridge domestically than in Europe or Japan. Also, the total number of two- or three-main girder plate bridge constructed in Korea is significantly less than the steel box girder bridge due to a lack of designers' familiarity with more complex design detailing of the bridge compare to that of a steel box girder bridge design. In this study, a new construction method called Turn Over method is proposed to minimize the steel section size used in a two- or three-main girder plate bridge by applying prestressing force to the member using confining concrete section's weight to reduce construction cost. Also, a full scale 20 m Turn Over girder specimen and a Turn Over girder bridge specimen were tested to evaluate constructability and structural safety of the members constructed using Turn Over process.