• 응용통계연구
• /
• 제26권3호
• /
• pp.549-568
• /
• 2013

보험상품의 보험료를 계산하거나 리스크 관리를 하는 과정에서 다중탈퇴율이 필요하지만 경험 자료의 부족으로 절대탈퇴율을 다중탈퇴율로 전환하여 많이 사용한다. 다중탈퇴율과 절대탈퇴율간의 전환에는 소수연령분포를 균등분포로 가정하거나 탈퇴력을 상수로 가정하여 전환하는 방법을 주로 사용한다. 하지만, 이러한 가정하에서는 전환 시 오차가 발생하므로 본 연구에서는 전환오차를 줄이기 위하여 소수연령분포를 삼차 스플라인 함수로 추정하여 전환하는 방법을 제안한다. 기존에 많이 사용하던 방법은 탈퇴력이 불연속적이라는 특징이 있었으나 새로이 제시하는 방법은 탈퇴력이 연속적이라는 측면에서 차이가 있다. 수치 예를 통하여 기존의 방법과 오차를 비교해 봄으로써 스플라인 추정법이 오차를 줄이는데 효과적임을 확인할 수 있다.

• Journal of Magnetics
• /
• 제22권2호
• /
• pp.203-213
• /
• 2017

Magnetically suspended control & sensitive gyroscope (MSCSG) is a novel type of gyroscope with the integration of attitude control and attitude angular measurement. To improve the precision and reduce the power consumption of Lorentz Force-type Magnetic Bearing (LFMB), the air gap flux density distribution of LFMB has been studied. The uniformity of air gap flux density is defined to qualify the uniform degree of the air gap flux density distribution. Considering the consumption, the average value of flux density is defined as well. Some optimal designs and analyses of LFMB are carried out by finite element simulation. The strength of the permanent magnet is taken into consideration during the machining process. To verify the design and simulation, a high-precision instrument is employed to measure the 3-dimensional magnetic flux density of LFMB. After measurement and calculation, the uniform degree of magnetic flux density distribution reaches 0.978 and the average value of the flux density is 0.482T. Experimental results show that the optimal design is effective and some useful advice can be obtained for further research.

• 한국산학기술학회논문지
• /
• 제17권1호
• /
• pp.468-473
• /
• 2016

본 연구는 디지털 측정기(Digital Force Gauge)를 이용해 급기가압 제연구역 출입문의 개방력을 측정하여 신뢰성을 검증하는데 있다. 개방력은 제연구역에 급기가압 기류가 들어가기 전과 후의 개방 부하를 측정하였다. 측정값은 미니탭 프로그램(Minitab PGM)의 AD(Anderson Darling) 통계분석법으로 신뢰도를 검증하였다. 분석된 P값은 제연설비의 작동 전과 후의 일부 층을 제외하고는 0.05 이상을 나타낸 것으로 보아 95% 신뢰도가 있는 것으로 해석된다. 측정값의 정규분포는 제연설비의 작동 여부와 관계가 없었으며, 계측기의 정밀도는 신뢰할 수 있는 것으로 분석된다. 그리고 급기가압 제연설비의 최적설계 조건은 계측기의 정밀도와 신뢰성, 측정자의 바른 자세, 출입문의 동일한 조건 등이 주요 인자로 판단된다. 따라서 급기가압 제연구역 출입문의 개방력의 측정은 디지털 측정기가 적합한 것으로 판단된다. 또한 효과적인 개방력의 측정은 측정자의 자세 표준화, 출입문의 초기 개방력의 설정 등이 주요 변수로 작용하고 있음을 알 수 있었다.

• Structural Engineering and Mechanics
• /
• 제84권5호
• /
• pp.633-649
• /
• 2022

In this study, the effect of circle tunnel on the force distribution around underground rectangular gallery was investigated using theoretical approach, experimental test and Particle flow code simulation (PFC). Gypsum model with dimension of 1500×1500 mm was built. Tensile strength of material was 1 MPa. Dimension of central gallery was 100 mm×200 mm and diameter of adjacent tunnel in its right side was 20 mm, 40 mm and 60 mm. Horizontal distance between tunnel wall and gallery edge were 25, 50, 75, 100 and 125 mm. using beam theory, the effect of tunnel diameter and distance between tunnel and gallery on the induced force around gallery was analyzed. In the laboratory test, the rate of loading displacement was set to 0.05 millimeter per minute. Also sensitivity analysis has been done. Using PFC2D, interaction between tunnel and gallery was simulated and its results were compared with experimental and theoretical analysis. The results show that the tensile force concentration has maximum value in center of the rectangular space. The tensile force concentration at the right side of the axisymmetric line of gallery has more than its value in the left side of the galleries axisymmetric line. The tensile force concentration was decreased by increasing the distance between tunnel and rectangular space. In whole of the configurations, the angles of micro cracks fluctuated between 75 and 105 degrees, which mean that the variations of tunnel situation have not any influence on the fracture angle.

• 한국정밀공학회지
• /
• 제22권4호
• /
• pp.44-51
• /
• 2005

In this paper, a new polishing head with the variable pressure structure was studied to improve the planarization uniformity of the conventional template-metal head. Metal surface waviness and slurry distribution on the pad have been known to affect the polishing uniformity even in the synchronized quill and platen velocities. A polishing head with silicon rubber sheet was used to get a curved pressure distribution. In the experiment, the vertical deflection behavior on the pad was characterized with back pressure in the air chamber. Quill force increased linearly with backpressure. However, backpressure under a quill force made the upward movements of the quill. In the wafer polishing experiments, polishing rate and polishing thickness distribution were severely changed with backpressure. The best uniformity was observed with the standard deviation off.5％ level of average polishing removal 215nm at backpressure 12.1kPa.

• 소성∙가공
• /
• 제20권1호
• /
• pp.36-41
• /
• 2011

Meso-scale or micro-scale forming of sheet metal parts has been recently considered as one of the important forming technologies with growing demand on meso/micro products for electric or medical devices. Experimental investigation on the cylindrical meso-cup drawing with hemispherical punch is carried out to examine the limit drawing ratio and thickness distribution of drawn cups. The working parameters chosen in this study are blank diameter, die-corner radius and blankholding force. It is found from the experiments that the limit drawing ratio of 2.4 can be achieved in the case of hemispherical cup drawing and uniform thickness distribution in wider region can be obtained compared with the results of conventional cup drawing.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2000년도 추계학술대회 논문집
• /
• pp.162-167
• /
• 2000

The warm deep drawability in square cup drawing is investigated about a newly developed high-strength steel sheet with retained austenite which is transformed into martensite during forming. For this investigation, six steps of temperature ranges, from room temperature to $250^{\circ}C$, and five kinds of drawing ratio, from 2.2 to 2.6 were adopted. As a result the maximum drawing force and the maximum drawing depth were affected by the elevated temperatures, and the more stable thickness strain distribution was observed to the elevated temperatures. But blue shortness happened over $200^{\circ}C$. The FEM analysis using the LS-DYNA code is adopted to compare the experimental results with the analytical results for thickness strain distribution.

• 한국유체기계학회 논문집
• /
• 제14권6호
• /
• pp.76-84
• /
• 2011

The effect of inlet velocity profile on the heat transfer coefficient in a rotating smooth channel was investigated experimentally. Three simulated inlet flow conditions of fully developed, uniform, and distorted inlet conditions were tested. The Reynolds number based on the channel hydraulic diameter was ranged from 10,000 to 30,000 and the transient liquid crystal technique was used to measure the distribution of the heat transfer coefficient in the rotating channel. Results showed that the overall heat transfer coefficient increased as the Reynolds number increased. Also, the distribution of the heat transfer coefficient was strongly affected by the inlet flow condition. Generally, the fully developed flow simulated condition showed the highest heat transfer coefficient.

• 수산해양교육연구
• /
• 제9권1호
• /
• pp.40-48
• /
• 1997

In this study, uniform pressure distribution with small hole on the surface of symmetric object were given to reduce the viscous frictional force. The results were as follows : 1. The velocity on upper stream were accelerated by uniform pressure distribution on symmetric objects for reducing the viscous frictional resistances. 2. The effects of the distributed small holes were reduced the viscous frictional resistances in down stream region more than upper stream due to the increasing pressure in reverse flow region. 3. The viscous skin friction on surface of symmetric objects with and without distributed small holes are effect in region of upper stream and much decreased in down stream region due to increasing of boundary layer thickness.

• 한국자동차공학회논문집
• /
• 제13권1호
• /
• pp.166-173
• /
• 2005

A vehicle stability control logic for 4WD hybrid electric vehicle is proposed using the regenerative braking of the rear motor and electronic brake force distribution module. Performance of the stability control logic is evaluated for J-turn and single lane change. It is found from the simulation results that the regenerative braking at rear motor is able to provide improved stability compared with the vehicle performance without my stability control. Additional improvement can be achieved by applying the regenerative braking plus electronic brake farce distribution control. It is expected that the regenerative braking offers additional improvement of the fuel economy as well as the vehicle stability control.