• Tribology and Lubricants
• /
• 제29권6호
• /
• pp.378-385
• /
• 2013

An epicyclic gearing system is compact and lightweight. However, it is difficult to share the driving force equally because the system has closed gear trains with multiple driving points, and it always has geometrical errors in the elements. Thus, in the case of planetary gears, the first problem is how to distribute the load evenly to the numerous planets. The method widely used abroad for this purpose is to utilize the elastic deformation of the components of the structure. However, the deflection is very complicated, and it is very easy for vibration problems to occur because of the decrease in the natural frequencies. Therefore, to equalize the load on the planets, this paper discusses the principle and theory behind the functioning of a floating intermediate ring. This magnifies the displacement of a planet's center arising from the equilibrium of the load and the lubricating film pressure, which improves the compliance of the planets. The results show that load equalization of the planets is possible through this improvement in their compliance.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2010년도 춘계 학술발표회
• /
• pp.1382-1387
• /
• 2010

A 3D FEM numerical analysis was performed to observe the changes of supporting system of a old 1-lane tunnel when it is enlarged to 2-lane, 3-lane and 4-lane. The standard Type-III supporting pattern was applied to the new tunnel because the ground was assumed as Type-III. The observation was carried out at the middle supporting system of the old 1-lane tunnel alignment. The results shows that the changes of old tunnel supporting system began when the new tunnel was excavated at 2D(D is the equivalent diameter of 1-lane tunnel) behind of the observation place and became very rapid from 1D.

• International Journal of Costume and Fashion
• /
• 제7권1호
• /
• pp.1-10
• /
• 2007

The Italian fashion industry has achieved a remarkable success in the global market with the distinctive features of its industry structure and product quality, and such a system has been subject to many researches. Especially, the retail structure centered on small speciality retail stores rather than the industry structure of medium and small sized companies and department stores is thought to be the most noticeable distinctive feature that differentiates the Italian fashion industry from other countries. This system is thought to be a driving force behind the continuous development and innovation closely associated with the market. In result, As medium and small size companies are the center of the Italian fashion industry, advantages of small companies based on region, that is, flexibility and innovation of medium and small size companies, close cooperation between companies are utilized and it has been progressing closely with the Italian traditional culture and being modernized based on traditional technological skills.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2010년 춘계학술대회논문집
• /
• pp.233-238
• /
• 2010

A two-dimensional laminar flow past a vertical plate in a microchannel is investigated. At far upstream and downstream from the plate in the microchannel, the plane Poiseuille flow exists. The Stokes flow for this microchannel is investigated analytically and then the laminar flow by numerical method. For the Stokes flow analysis, the method of eigenfunction expansion is used. From the results, the streamline pattern and the pressure distribution are plotted, and the additional pressure drop induced by the plate and the force exerted on the plate are calculated as functions of the length of the plate. For the laminar flow, finite difference method (FDM) is used to obtain the vorticity and the stream function. When the Reynolds number exceeds a critical value, a pair of viscous eddies appears behind the plate.

• 한국의류학회지
• /
• 제34권12호
• /
• pp.1947-1956
• /
• 2010

This study is to understand fashion product aesthetics by exploring the antecedents of aesthetic experiences and the influence of aesthetic experiences on impulse buying behavior. A total of 520 usable questionnaires were obtained through an internet survey. A structural equation model using a correlation matrix with maximum likelihood was estimated by using AMOS 18.0 to examine the relationships among aesthetic value, aesthetic acumen, affective experience, cognitive experience, and impulse buying behavior. The results showed that aesthetic value and acumen had a significant effect on the cognition of aesthetic experiences and that aesthetic experiences had a significant effect on impulse buying behavior. These results highlight the powerful motivational force behind fashion product aesthetics. The key implications for research and management are discussed further.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 춘계학술대회논문집B
• /
• pp.508-513
• /
• 2000

An experimental investigation has been carried out for two circular cylinders having different groove configurations(U and V-shape). The results were compared with those for the smooth circular cylinder. The drag force, mean velocity and turbulent intensity profiles of wake behind the cylinders were measured with varying the Reynolds number $Re=8000{\sim}14,000$ based on the cylinder diameter. As a results, the U-groove circular cylinder was found to be most effective riblet shape with reducing the drag up to 21%. As the Reynolds number increases, the vortex shedding frequency of the grooved cylinders becomes a little larger, compared to the smooth cylinder. The flow visualization using the smoke-wire technique was also carried out to see the flow structure qualitatively.

• EDISON SW 활용 경진대회 논문집
• /
• 제1회(2012년)
• /
• pp.85-88
• /
• 2012

루프 페어링은 화물차의 주행저항 및 유도항력을 줄이기 위해 설치되는 장치 중 하나이다. 이 장치는 화물차의 지붕 윗부분에 설치하여 화물차가 받는 항력을 줄이는데 사용이 된다. 이번 과제에서는 루프 페어링의 효과에 대해 유체역학적인 증명 및 확인을 위해 루프 페어링의 설치 전-후 트럭의 형상에 따른 유동의 변화와 항력계수의 값을 EDISON CFD를 사용하여 구한 후 각각 비교 하였다. 이를 위해 EDISON CFD의 압력 contour와 stream line, 정압계수(Cp)그래프를 통해 트럭의 주행 중 발생하는 박리현상을 가시적으로 확인하였고, 항력계수(Cd)값을 비교하는 것을 통해 루프 페어링을 설치한 경우가 미설치된 경우보다 주행 시 더욱 유리하다는 것으로 결론을 내렸다.

• 설비공학논문집
• /
• 제13권10호
• /
• pp.1042-1048
• /
• 2001

When a liquid is supplied through a nozzle onto a relatively non-wetting inclined solid surface, a narrow rivulet forms. This work provides novel physical insights into the following phenomena in the rivulet flow that have not been well understood to date. Firstly, the fundamental mechanism behind the transition of a linear rivulet to a droplet flow is investigated. The experiments show that the droplet flow emerges due to the necking of a liquid thread near the nozzle. Based on the observation, it is argued that when the axial velocity of a liquid is slower than the retraction velocity of its thread, the bifurcation of the liquid thread occurs, and this argument is experimentally verified. Secondly, a discussion on the curled motion of a meandering rivulet is given. This study proposes the contact angle hysteresis as a primary origin of the centripetal force that enables the rivulet\`s curved motion. A simple scaling analysis based on this assumption predicts a radius of curvature which agrees with the experimental observation.

• 대한물리치료과학회지
• /
• 제3권1호
• /
• pp.895-905
• /
• 1996

A whiplash injury of cervical spine is typically caused by a special kind of accident. It usually involves a driver of an automobile who experiences a direct impact from behind. There are no external signs of the injury, but shearing forces from the rapid flexion and extension momement result in segmental lesions. The extent of injury to the tissue depends upon the force of impact, the exact position of head at the moment of impact, the awareness of impending injury in order to "prepare" the musculature, and the normalcy of all the tissues of the neck. Diagnosis demend a carefully detailed history and a through musculo-skeletal--neurological examination. Whenever possible, the symptoms claimed must be verified by a carefule neurological examination.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1825-1829
• /
• 2004

A numerical simulation was performed of flow behind a squareback car with a rear spoiler. Influence of the rear spoiler on drag force has been studied. A lattice Boltzmann method was utilized to portray the unsteady aerodynamics of wake flows. The pressure distributions were employed to examine the vortex formation mode against the rear spoiler. It was found that the separation flow at roof end and c-pillar makes three dimensional vortex structures and the rear spoiler increases pressure on the rear glass surface.