• Membrane Journal
• /
• v.28 no.1
• /
• pp.75-82
• /
• 2018

Forward osmosis (FO) desalination system has been highlighted to improve the energy efficiency and drive down the carbon footprint of current reverse osmosis (RO) desalination technology. To improve the trade-off between water flux and salt rejection of thin film composite (TFC) desalination membrane, thin film nanocomposite membranes (TFN), in which nanomaterials as a filler are embeded within a polymeric matrix, are being explored to tailor the separation performance and add new functionality to membranes for water purification applications. The objective of this article is to develop a graphene nanocomposite membrane with high performance of water selective permeability (high water flux, high salt rejection, and low reverse solute diffusion) as a next-generation FO desalination membrane. For advances in fabrication of graphene oxide (GO) membranes, layer-by-layer (LBL) technique was used to control the desirable structure, alignment, and chemical functionality that can lead to ultrahigh-permeability membranes due to highly selective transport of water molecules. In this study, the GO nanocomposite membrane fabricated by LBL dip coating method showed high water flux ($J_w/{\Delta}{\pi}=2.51LMH/bar$), water selectivity ($J_w/J_s=8.3L/g$), and salt rejection (99.5%) as well as high stability in aqueous solution and under FO operation condition.

• Journal of the Korean Society for Marine Environment & Energy
• /
• v.16 no.3
• /
• pp.181-188
• /
• 2013

The increase of carbon dioxide ($CO_2$) emission is known as one of the major causes of global warming, and it has a strong influence on the global environment. Therefore many researchers and politicians have tried to regulate the $CO_2$ emission. In regards to the matter, the IMPACT (Inclusive Marine Pressure Assesment and Classification Technology) committee under the Japan Society of Naval Architects and Ocean Engineers (JASNAOE) has developed an inclusive environmental impact assessment index, so-called "Triple I(III)", in order to assess the environmental impact including economic factors due to the artificial development of marine. In this study, III was applied to compare between the environmental impact of $CO_2$ emitted by container vessels during their life-cycle period and economic benefit due to their operating. Furthermore, III was also applied to assess the comprehensive environmental impact for the cases with various capacities of container vessels and different sailing route. From the results, the case for shortening of the sailing route is more effective to get the advantageous assessment results of III than the case for varying the size of vessels.

• Atmosphere
• /
• v.23 no.1
• /
• pp.93-102
• /
• 2013

Atmospheric transport pathway of an air mass is an important constraint controlling the chemical properties of the air mass observed at a designated location. Such information could be utilized for understanding observed temporal variabilities in atmospheric concentrations of long-lived chemical compounds, of which sinks and/or sources are related particularly with natural and/or anthropogenic processes in the surface, and as well as for performing inversions to constrain the fluxes of such compounds. The Lagrangian particle dispersion model FLEXPART provides a useful tool for estimating detailed particle dispersion during atmospheric transport, a significant improvement over traditional "single-line" trajectory models that have been widely used. However, those without a modeling background seeking to create simple back-trajectory maps may find it challenging to optimize FLEXPART for their needs. In this study, we explain how to set up, operate, and optimize FLEXPART for back-trajectory analysis, and also provide automatization programs based on the open-source R language. Discussions include setting up an "AVAILABLE" file (directory of input meteorological fields stored on the computer), creating C-shell scripts for initiating FLEXPART runs and storing the output in directories designated by date, as wells as processing the FLEXPART output to create figures for a back-trajectory "footprint" (potential emission sensitivity within the boundary layer). Step by step instructions are explained for an example case of calculating back trajectories derived for Anmyeon-do, Korea for January 2011. One application is also demonstrated in interpreting observed variabilities in atmospheric $CO_2$ concentration at Anmyeon-do during this period. Back-trajectory modeling information introduced in this study should facilitate the creation and automation of most common back-trajectory calculation needs in atmospheric research.

• Asian-Australasian Journal of Animal Sciences
• /
• v.30 no.1
• /
• pp.125-132
• /
• 2017

Objective: Along with increasing livestock products via intensive rearing, the accumulation of livestock manure has become a serious issue due to the fact that there is finite land for livestock manure recycling via composting. The nutrients from livestock manure accumulate on agricultural land and the excess disembogues into streams causing eutrophication. In order to systematically manage nutrient loading on agricultural land, quantifying the amount of nutrients according to their respective sources is very important. However, there is a lack of research concerning nutrient loss from livestock manure during composting or storage on farms. Therefore, in the present study we quantified the nutrients from dairy cattle manure that were imparted onto agricultural land. Methods: Through investigation of 41 dairy farms, weight reduction and volatile solids (VS), total nitrogen (TN), and total phosphorus (TP) changes of dairy cattle manure during the storage and composting periods were analyzed. In order to support the direct investigation and survey on site, the three cases of weight reduction during the storing and composting periods were developed according to i) experiment, ii) reference, and iii) theoretical changes in phosphorus content (${\Delta}P=0$). Results: The data revealed the nutrient loading coefficients (NLCs) of VS, TN, and TP on agricultural land were 1.48, 0.60, and 0.66, respectively. These values indicated that the loss of nitrogen and phosphorus was 40% and 34%, respectively, and that there was an increase of VS since bedding materials were mixed with excretion in the barn. Conclusion: As result of nutrient-footprint analyses, the amounts of TN and TP particularly entered on arable land have been overestimated if applying the nutrient amount in fresh manure. The NLCs obtained in this study may assist in the development of a database to assess the accurate level of manure nutrient loading on soil and facilitate systematic nutrient management.

• Journal of the Korean Arthroscopy Society
• /
• v.14 no.1
• /
• pp.49-52
• /
• 2010

Purpose: We introduce arthroscopically assisted mini-open rotator cuff repair using anterolateral approach. Operative Technique: Placing lateral decubitus position on general anesthesia, a standard arthroscopic glenohumeral examination is performed to evaluate lesions of shoulder joint through posterior and anterior portal. And then arthroscope is placed in the subacromial space and we evaluate the size of the torn tendon and perform arthroscopic acromioplasty through lateral portal. A 3 to 4 cm skin incision is performed from anterolateral edge of acromion to distal and dissected along to raphe between anterior and middle deltoid. A deltoid retractor is then placed, allowing direct visualization of the rotator cuff and humeral head. As torn tendon is tagged by traction suture, we try to anatomical reduction on the footprint and then perform single row or double row repair of the rotator cuff using suture anchors. To prevent avulsion of the deltoid from the acromion, additional sutures by bone tunnel with acromion and deltoid is performed. Conclusion: This technique is useful procedure to get direct approach to anterior portion of supraspinatus tendon and to need lesser deltoid retraction than portal extension approach due to dividing along to raphe between anterior and middle deltoid. Also it provide better visualization of the superior portion of subscapularis and infraspinatus.

• The Journal of the Korea Contents Association
• /
• v.10 no.6
• /
• pp.286-296
• /
• 2010

The study of the development of DJ robots is to meet the demands of the music services which are changing very rapidly in the digital and network era. Existing studies, as a whole, develop music services on the premise of personalized environment and equipment, but the DJ robot is on the premise of the open space shared by the public. DJ robot gives priority to traditional space and music. Recently as the hospitality and demand for cultural contents of South Korea expand to worldwide, industrial use of the contents based on traditional or our unique characteristics is getting more and more. Meanwhile, the DJ robot is composed of a combination of two modules. One is to detect changes in the external environment and the other is to set the properties of the music by psychology, emotional engineering, etc. DJ robot detect the footprint of the temperature, humidity, illumination, wind, noise and other environmental factors measured, and will ensure the objectivity of the music source by repeated experiments and verification with human sensibility ergonomics based on Hevner Adjective Circle. DJ robot will change the soundscape of the traditional space being more beautiful and make the revival and prosperity of traditional music with the use of traditional music through BGM.

• Korean Journal of Remote Sensing
• /
• v.27 no.5
• /
• pp.543-553
• /
• 2011

Sea ice concentration calculated from the AMSR-E onboard Aqua satellite by using NASA Team2 sea ice algorithm has proven to be very accurate over sea ice in Antarctic Ocean. When glacial ice such as icebergs and ice shelves are dominant in an AMSR-E footprint, the accuracy of the ice concentration calculated from NASA Team2 algorithm is not well maintained due to the different microwave characteristics of the glacial ice from sea ice. We extracted the concentrations of sea ice and glacial ice from two ENVISAT ASAR images of George V coast in southern Antarctica, and compared them with NASA Team2 sea ice concentration. The result showed that the NASA Team2 algorithm underestimates the concentration of glacial ice. To interpret the large deviation of estimation over glacial ice, we analyzed the characteristics of microwave radiation of the glacial ice in PR(polarization ratio), GR(spectral gradient ratio), $PR_R$(rotated PR), and ${\Delta}GR$ domain. We found that glacial ice occupies a unique region in the PR, GR, $PR_R$, and ${\Delta}GR$ domain different from other types of ice such as ice type A, B, and C, and open water. This implies that glacial ice can be added as a new category of ice to the AMSR-E NASA Team2 sea ice algorithm.

• Korean Journal of Remote Sensing
• /
• v.29 no.4
• /
• pp.361-373
• /
• 2013

The monitoring of urban area, target detection and building reconstruction have been actively studied and investigated since high resolution X-band SAR images could be acquired by airborne and/or satellite SAR systems. This paper describes an efficient approach to reconstruct artificial structures (e.g. apartment, building and house) in urban area using high resolution X-band SAR images. Building footprint was first extracted from 1:25,000 digital topographic map and then a corner line of building was detected by an automatic detecting algorithm. With SAR amplitude images, an initial building height was calculated by the length of layover estimated using KS-test (Kolmogorov-Smirnov test) from the corner line. The interferometric SAR phases were simulated depending on SAR geometry and changable building heights ranging from -10 m to +10 m of the initial building height. With an interferogram from real SAR data set, the simulation results were compared using the method of the phase consistency. One of results can be finally defined as the reconstructed building height. The developed algorithm was applied to repeat-pass TerraSAR-X spotlight mode data set over an apartment complex in Daejeon city, Korea. The final building heights were validated against reference heights extracted from LiDAR DSM, with an RMSE (Root Mean Square Error) of about 1~2m.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.11 no.3
• /
• pp.166-173
• /
• 2008

Recently, problem of earth environment being attended with international issue, people are concerned about the environmentally-friendly and renewable biomass energy. Especially, the forest biomass is more important because Korea have to control carbon footprint for Kyoto Protocol and Convention on Climate Change. In case of Korea, forest area covers the land about 2/3 of all country. It is needed that more economical and efficient method to estimate the biomass by remote sensing data which include wide coverage and is progressed by one-step. In this study, we estimate forest biomass with LiDAR data and aerial photograph. Three biomass equation is used and estimate mean biomass of single tree and entire biomass in plots. The results are compared with field data. $R^2$ of the mean biomass of single tree is greater than 0.8 and that of entire biomass in plots is greater than 0.65. In conclusion, the method using remote sensing data is verified more economical and efficient than previous field data method.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.39B no.12
• /
• pp.831-841
• /
• 2014

The attacker can access the RFID systems illegally because authentication operation on the RFID systems are performed in wireless communication. Authentication methods based on the PUF were presented to defend attacks. Because of Hash and AES, the cost is expensive for the low-cost RFID tag. In this paper, the PUF-based encryption processor and the mutual authentication protocol are proposed for low-cost RFID authentication. The challenge-response pairs (PUF's input and output) are utilized as the authentication key and encrypted by the PUF's characteristics. The encryption method is changed each session and XOR operation with random number is utilized. Therefore, it is difficult for the attacker to analyze challenge-response pairs and attack the systems. In addition, the proposed method with PUF is strong against physical attacks. And the method protects the tag cloning attack by physical attacks because there is no authentication data in the tag. Proposed processor is implemented at low cost with small footprint and low power.