• 대한토목학회논문집
• /
• 제29권4A호
• /
• pp.395-405
• /
• 2009

이 연구의 목적은 조립식 기초부를 갖는 프리캐스트 세그먼트 PSC 교각의 성능을 파악하는데 있다. 제안된 프리캐스트 교각 시스템은 현장에서의 작업을 줄이고 공사기간의 단축을 가져올 수 있다. 조립식 기초부는 프리캐스트 세그먼트 PSC 교각의 현장타설 기초부를 대체할 목적을 갖고 있다. 공사기간의 단축은 교통차단이나 교통우회가 필요한 공사의 안전성과 경제성에 직결된다. 프리캐스트 세그먼트 PSC 교각 실험체에 일정 축하중 하에서 횡방향 반복하중을 가하는 준정적 실험을 수행하였다. 연계논문에서는 조립식 기초부를 갖는 프리캐스트 세그먼트 PSC 교각의 성능평가를 위해 실험 및 해석적 연구를 수행하였다.

• Advances in concrete construction
• /
• 제16권1호
• /
• pp.21-34
• /
• 2023

This work presents a complete optimal model for trapezoidal combined footings that support a concentric load and moments around of the "X" and "Y" axes in each column to obtain the minimum area and the minimum cost. The model presented in this article considers a pressure diagram that has a linear variation (real pressure) and the equations are not limited to some cases. The classic model takes into account a concentric load and the moment around of the "X" axis (transverse axis) that is applied due to each column, i.e., the resultant force is located at the geometric center of the footing on the "Y" axis (longitudinal axis), and when the concentric load and moments around of the "X" and "Y" axes act on the footing is considered the uniform pressure applied on the contact surface of the footing, and it is the maximum pressure. Four numerical problems are presented to find the optimal design of a trapezoidal combined footing under a concentric load and moments around of the "X" and "Y" axes due to the columns: Case 1 not limited in the direction of the Y axis; Case 2 limited in the direction of the Y axis in column 1; Case 3 limited in the direction of the Y axis in column 2; Case 4 limited in the direction of the Y axis in columns 1 an 2. The complete optimal design in terms of cost optimization for the trapezoidal combined footings can be used for the rectangular combined footings considering the uniform width of the footing in the transversal direction, and also for different reinforced concrete design codes, simply by modifying the resisting capacity equations for moment, for bending shear, and for the punching shear, according to each of the codes.

• 전기학회논문지
• /
• 제57권11호
• /
• pp.1929-1932
• /
• 2008

In case of a line-to-ground fault at transmission lines, a portion of fault current will flow into the earth through the footings of the faulted tower causing electrical potential rise nearby the faulted tower footings. In this situation, any buried pipelines or structures nearby the faulted tower can be exposed to the electrical stress by earth potential rise. Although many research works has been conducted on this phenomena, there has been no clear answer of the required separation distance between tower footings and neary buried pipeline because of its dependancy on the soil electrical charactersics of the concerned area and the faulted system.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2004년도 춘계학술발표회
• /
• pp.44-49
• /
• 2004

The settlements of footings in send are often estimated based on the results of in-situ tests, particularly the standard penetration test (SPT) and the cone penetration test (CPT). In this paper, we analyze the load-settlement response of vertically loaded footings placed in sands using both the finite element method with a non-linear stress-strain model and the conventional elastic approach. Calculations are made for both normally consolidated and heavily overconsolidated sands with various relative densities. For each case, the cone penetration resistance qc is calculated using CONPOINT, a widely tested program that allows computation of qc based on cavity expansion analysis. Based on these analyses, we propose a procedure for the estimation of footing settlement in sands based on CPT results.

• Geomechanics and Engineering
• /
• 제1권2호
• /
• pp.113-120
• /
• 2009

The results of FLAC3D-based numerical evaluation of the bearing capacity shape factor $s_{\gamma}$ are presented for square and rectangular footings on granular soils. The results confirm a peculiar effect found earlier by Zhu and Michalowski (2005), where for large values of internal friction angle, $s_{\gamma}$ exhibits a peak at some aspect ratio of the footing, and then decreases towards unity at large aspect ratios. The Zhu and Michalowski's results were derived using the finite element program ABAQUS, and the results presented in this note corroborate their earlier findings.

• Geomechanics and Engineering
• /
• 제3권2호
• /
• pp.153-167
• /
• 2011

Traditional design methods of bearing capacity of shallow foundations are deterministic in the sense that they do not explicitly consider the inherent uncertainty associated with the factors affecting bearing capacity. To account for such uncertainty, available deterministic methods rather employ a fixed global factor of safety that may lead to inappropriate bearing capacity predictions. An alternative stochastic approach is essential to provide a more rational estimation of bearing capacity. In this paper, the likely distribution of predicted bearing capacity of strip footings subjected to vertical loads is obtained using a stochastic approach based on the Monte Carlo simulation. The approach accounts for the uncertainty associated with the soil shear strength parameters: cohesion, c, and friction angle, ${\phi}$, and the cross correlation between c and ${\phi}$. A set of stochastic design charts that assure target reliability levels of 90% and 95%, are developed for routine use by practitioners. The charts negate the need for a factor of safety and provide a more reliable indication of what the actual bearing capacity might be.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2001년도 봄 학술발표회 논문집
• /
• pp.715-722
• /
• 2001

The main purpose of this study is to evaluate early age thermal stresses and to estimate the risk of thermal cracking in the footings of Hyungsan bridge. In this study, stress analyses are performed for several construction stages using the computation of temperature distributions. The stress analysis results show that, not using the embedded pipe cooling, placing the concrete at once for each footings may cause sever thermal cracking. So, the structures should be constructed with one horizontal construction joint. Then the height of each lifts were determined to be 1.50 meters. Using various time intervals between lifts, temperature and stress.

• 콘크리트학회논문집
• /
• 제23권2호
• /
• pp.159-168
• /
• 2011

이 연구에서는 뚫림 전단을 재하받는 전단 보강/전단 무보강 슬래브-기둥 내부 접합부와 기초판에 대하여 개선된 설계 방법을 개발하였다. 슬래브-기둥 접합부와 기초판의 다양한 파괴 메커니즘(경사 인장 균열 파괴, 전단 보강근의 항복, 콘크리트 압축대/스트럿의 압축 파괴)을 고려하여 뚫림 전단강도를 산정하였다. 콘크리트 위험 단면에 작용하는 뚫림 전단은 대부분 콘크리트 압축대에 의하여 지지된다고 가정하였으며, 콘크리트 압축대의 뚫림 전단강도는 압축 수직 및 전단의 조합 응력을 재하받는 콘크리트 재료 파괴 기준에 근거하여 산정하였다. 제안된 강도 모델은 실험 결과 와의 비교를 통하여 검증하였다. 검증 결과, 제안된 설계 방법은 전단 보강 및 전단 무보강 경우에 대하여 현행 KCI 설계기준 보다 우수한 강도 추정 능력을 가지고 있다는 점이 밝혀졌다.

• Earthquakes and Structures
• /
• 제7권6호
• /
• pp.1001-1024
• /
• 2014

The size of spread footings was found to be unnecessarily large from some actual engineering practices constructed in Taiwan, due to the strict design provisions related to footing uplift. According to the earlier design code in Taiwan, the footing uplift involving separation of footing from subsoil was permitted to be only up to one-half of the foundation base area, as the applied moment reaches the value of plastic moment capacity of the column. The reason for this provision was that rocking of spread footings was not a favorable mechanism. However, recent research has indicated that rocking itself may not be detrimental to seismic performance and, in fact, may act as a form of seismic isolation mechanism. In order to clarify the effects of the relative strength between column and foundation on the rocking behavior of a column, six circular reinforced concrete (RC) columns were designed and constructed and a series of rocking experiments were performed. During the tests, columns rested on a rubber pad to allow rocking to take place. Experimental variables included the dimensions of the footings, the strength and ductility capacity of the columns and the intensity of the applied earthquake. Experimental data for the six circular RC columns subjected to quasi-static and pseudo-dynamic loading are presented. Results of each cyclic loading test are compared against the benchmark test with fixed-base conditions. By comparing the experimental responses of the specimens with different design details, a key parameter of rocking behavior related to footing size and column strength is identified. For a properly designed column with the parameter higher than 1, the beneficial effects of rocking in reducing ductility and the strength demand of columns is verified.

• Advances in Computational Design
• /
• 제4권3호
• /
• pp.273-294
• /
• 2019

In this paper is presented the minimum cost (optimal design) for reinforced concrete circular isolated footings based on an analytic model. This model considers a load and two moments in directions of the X and Y axes, and the pressure has a variation linear, these are the effects that act on the footing. The minimum cost (optimal design) and the Maple program are shown in Flowcharts. Two numerical experiments are shown to obtain the minimum cost design of the two materials that are used for a circular footing supporting an axial load and moments in two directions in accordance to the code of the ACI (American Concrete Institute), and it is compared against the current design (uniform pressure). Also, the same examples are developed through the normal procedure to verify the minimum cost (optimal design) presented in this document, i.e., the equations of moment, bending shear and punching shear are used to check the thickness, and after, the steel areas of the footing are obtained, and it is compared against the current design (uniform pressure). Results section show that the optimal design is more accurate and more economical than to any other model. Therefore, it is concluded that the optimized design model presented in this paper should be used to obtain the minimum cost design for the circular isolated footings.