Browse > Article
http://dx.doi.org/10.4334/JKCI.2011.23.2.159

Direct Punching Shear Strength Model for Interior Slab-Column Connections and Column Footings with Shear Reinforcement  

Choi, Kyoung-Kyu (School of Architecture, Soongsil University)
Kim, Sug-Hwan (School of Architecture, Soongsil University)
Kim, Dong-Hoon (School of Architecture, Soongsil University)
Park, Hong-Gun (Dept. of Architecture, Seoul National University)
Publication Information
Journal of the Korea Concrete Institute / v.23, no.2, 2011 , pp. 159-168 More about this Journal
Abstract
In the present study, an improved design method was developed for the punching shear strength of interior slabcolumn connections and column footings with and without shear reinforcement. In the evaluation of the punching shear strength, the possible failure mechanisms of the connections and column footings were considered. The considered failures modes were inclined tensile cracking of concrete, yielding of shear re-bars, and concrete crushing of compression zone/strut. The punching shear applied to the concrete critical section was assumed to be resisted mainly by the compression zone. The punching shear strength of the concrete compression zone was evaluated based on the material failure criteria of the concrete subjected to the compressive normal stress and shear stress. For verification of the proposed design method, its prediction was compared with the existing test results. The result showed that the proposed method predicted the strengths of the test specimens better than the current design methods of the KCI code for both the shear reinforced and unreinforced cases.
Keywords
slab-column connections; concrete slabs; column footings; direct punching shear; shear reinforcement;
Citations & Related Records
Times Cited By KSCI : 2  (Citation Analysis)
연도 인용수 순위
1 Vam der Voet, A. F., Dilger, W. H., and Ghali, A., “Concrete Flat Plates with Well-Anchored Shear Reinforcement Elements,” Canadian Journal of Civil Engineering, Vol. 9, No. 1, 1982, pp. 107-114.   DOI   ScienceOn
2 Broms, C. E., “Shear Reinforcement For Deflection Ductility of Flat Plates,” ACI Struct. J., Vol. 87, No. 6, 1990, pp. 696-705.
3 Hegger, J., Sherif, A. G., and Ricker, M., “Experimental Investigations on Punching Behavior of Reinforced Concrete Foooting,” ACI Structural Journal, Vol. 103, No. 4, 2006, pp. 604-612.
4 Richart, F. E., “Reinforced Concrete Wall and Column Footings Part 1,” J. of ACI, Vol. 20, No. 2 1948, pp. 97-127.
5 CSA A23.3-M04 Technical Committee, Design of Concrete Structures, Canadian Standards Associations, Toronto, Ontario, 2004, 258 pp.
6 Kinnunen, S. and Nylander, H., “Punching of Concrete Slabs without Shear Reinforcement,” Transactions No. 158, Royal Institute of Technology, Stockholm, 1960, 112 pp.
7 Bažnt, Z. P. and Cao, Z., “Size Effect in Punching Shear Failure of Slabs,” ACI Struct. J., Vol. 84, No. 1, 1987, pp. 44-53.
8 Manterola, M., “Poinconnement de Dalles Sans Armature D’effort Trenchant,” Comite Europeen du Beton (Hrsg.), Dalles, Structures Planes, CEB-Bull, Paris, D’Information 1966, 58 pp.
9 Beutel, R., “Punching of Flat Slabs with Shear Reinforcement at Inner Columns,” Rheinisch-Westfalischen Technischen Hochschule Aachen, Aachen, Germany, 2002, 267 pp.
10 Shehata, I. A. E. M., “Theory of Punching in r. c. Slabs,” Ph.D, Thesis, Polytechnic of Central London, 1985.
11 Sherif, A. G. and Dilger, W. H., “Tests of Full-Scale Continuous Reinforced Concrete Flat Slabs,” ACI Struct. J., Vol. 97, No. 3, 2000, pp. 455-467.
12 Mokhtar, A., Ghali, A., and Dilger, W. H., “Stud Shear Reinforcement for Flat Concrete Plates,” ACI J., Vol. 82, No. 5, 1985, pp. 676-683.
13 Pilakoutas, K. and Li, X., “Alternative Shear Reinforcement for Reinforced Concrete Flat Slabs,” ASCE, Vol. 129, No. 9, 2003, pp. 1164-1172.   DOI   ScienceOn
14 Adetta, B. and Polak, M. A., “Retrofit of Slab Column Interior Connections Using Shear Boltss,” ACI Struct. J., Vol. 102, No. 2, 2005, pp. 268-274.
15 Hegger, J., Ricker, M., and Sherif, A. G., “Punching Strength of Reinforced Concrete Footings,” ACI Structural Journal, Vol. 106, No. 5, 2009, pp. 706-715.
16 Langohr, P. H., Ghali, A., and Dilger, W. H., “Special Shear Reinforcement for Concrete Flat Plate,” ACI Journal, Vol. 73, No. 3, 1976, pp. 141-146.
17 Seible, F., Ghali, A., and Dilger, W. H., “Preassembled Shear Reinforcing Units for Flat Plates,” ACI Journal, Vol. 77, No. 1, 1980, pp. 28-35.
18 Park, H. and Choi, K., “Improved Strength Model for Interior Flat Plate-Column Connections Subject to Unbalanced Moment,” ASCE J. Structural Engr., Vol. 132, No. 5, 2006, pp. 694-704.   DOI   ScienceOn
19 최경규, 박홍근, “무량판 슬래브-기둥 접합부에 대한 전 단강도 모델,” 콘크리트학회 논문집, 22권, 3호, 2010, pp. 345-356.   과학기술학회마을   DOI   ScienceOn
20 Kotsovos, M. D. and Pavlovic, M. N., “Ultimate Limit-State Design of Concrete Structures,” a New Approach, Thomas Telford, London, 1998, 208 pp.
21 Zararis, P. D. and Papadakis, G. C., “Diagonal Shear Failure and Size Effect in RC Beams without Web Reinforcement,” J. Struct. Engrg., ASCE, Vol. 127, No. 7, 2001, pp. 733-742.   DOI   ScienceOn
22 Jelic, I., Pavlovic, M. N., and Kotsovos, M. D., A “Study of Dowel Action in Reinforced Concrete Beams,” Magazine of Concrete Research, Vol. 51, No. 2, 1999, pp. 131-141.   DOI   ScienceOn
23 Tureyen, A. K. and Frosch, R. J., “Concrete Shear Strength, Another Perspective,” ACI Struct. J., Vol. 100, No. 5, 2003, pp. 609-615.
24 Choi, K., Park, H., and Wight, J. K., “Unified Shear Strength Model for Reinforced Concrete Beams-Part I: Development,” ACI Struct. J., Vol. 104, No. 2, 2007, pp. 142-152.
25 MacGregor, J. G. and Wight, J. K., Reinforced Concrete: Mechanics and Design, Prentice Hall, NJ, 2005, 1132 pp.
26 Choi, K., Reda Taha, M. M., Park, H., and Maji, A. K., “Punching Shear Strength of Interior Concrete Slab-Column Connections Reinforced with Steel Fibers,” Cement and Concrete Composites, Vol. 29, No. 5, 2007, pp. 409-420.   DOI   ScienceOn
27 Park, H., Choi, K., and Wight, J. K., “Strain-Based Shear Strength Model for Slender Beams without Web Reinforcement,” ACI Struct. J., Vol. 103, No. 6, 2006, pp. 783-793.
28 Chen W. F., Plasticity in Reinforced Concrete, NewYork, McGraw-Hill, 1982, pp. 204-205.
29 동부건설, 미래형 아파트 구조시스템 개발에 관한 연구, 2003, pp. 285-286
30 Ruiz, M. F. and Muttoni, A., “Applications of Critical Shear Crack Theory to Punching of Reinforced Concrete Slabs with Transverse Reinforcement.” ACI Struct. J., 106-S46, 2009, pp. 485-494
31 Beutel, R. and Hegger, J., Punching Shear Resistance of Shear Reinforced Flat Slabs, Arbeitsgemeinshaft industrieller Forschungsvereinigungen “Otto von Guericke” e. V., Research Programm Nr.10644-N, DBV 185, 1998.
32 Pralong, J., Poinconnement Symetrique des Plachers-Dalles, IBK-Bericht Nr. 131, Insitut fur Baustatik und Konstruktion ETH Zurish, 1982.
33 Johansen, K. W., Yield-Line Theory, Cement and Concrete Ass., London, 1962, 181 pp.
34 최경규, 박홍근, “플랫플레이트-기둥 접합부의 뚫림 전단 강도,” 콘크리트학회 논문집, 16권, 2호, 2004, pp. 163-174.
35 FIP 12, Punching of Structural Concrete Slabs, CEB-FIP Task Group, Lausanne, Switzerland, 2001, 314 pp.
36 ACI Committee 318, Building Code Requirements for Structural Concrete (ACI 318-08) and Commentary (ACI 318R-08), USA, 2008, 473 pp.
37 한국콘크리트학회, 콘크리트 구조설계기준 해설, 2007, 524 pp.
38 EC 2, Design of Concrete Structures Part I: General Rules and Rules for Buildings, European Committee for Standardization Brussels, 2002, 225 pp.