• CELLMED
• /
• v.12 no.2
• /
• pp.6.1-6.5
• /
• 2022

Objectives: Sciatica is a musculoskeletal pain sensed in the leg along with the distribution of the sciatic nerve, which is sometimes accompanied by low back pain and is most commonly caused by a disc herniation. In the Unani system of Medicine, Irq-un-Nasa (Sciatica) is defined as the pain which starts from the hip joint and descends towards the foot. It is a type of Waja-ul-Mafasil which is developed due to the accumulation of Khilt-e-Dam or Khilt-e-Balgham ghaleez in the hip joint. The conventional system of Medicine offers several medications and surgeries to manage sciatica with limited clinical evidence of effectiveness. These cases aim to provide insight into the effects of Fasd (Venesection) in Irq-un-Nasa. Case Presentation: Fasd was performed in the saphena minor vein of two clinically diagnosed patients with sciatica after the initial assessment. Two sittings of Fasd, once a week in each patient, were performed, followed by telephonic assessments for two months. The intensity of sciatic pain reduced with subsequent sittings of Fasd, and there was no recurrence of any symptoms and signs again during complete follow-up. Conclusion: Based on the results of the present case report, it appears that such cases of Irq-un-Nasa can be managed with Fasd, and the quality of life of such patients can also be improved.

• Composites Research
• /
• v.34 no.6
• /
• pp.400-405
• /
• 2021

In this study, a composite material frame was designed to increase the energy harvesting efficiency of polyvinylidene fluoride (PVDF) ribbon harvesters which are installed inside smart shoes. In order to minimize the amount of deformation in the load direction of the frame, it was designed using carbon continuous fiber composites and its complex shaped structure was manufactured using a 3D printer. In order to calculate the amount of deformation of the insole and midsole of the shoes under the condition of the load generated during walking, the insole and midsole were modeled using the distributed spring elements. Using finite element analysis, the elongation of ribbon-type harvesters mounted on smart shoes was calculated during walking. It is expected that the predicted elongation of the harvester can be utilized to increase the energy harvesting efficiency of smart shoes.

• Korean Journal of Optics and Photonics
• /
• v.24 no.1
• /
• pp.23-28
• /
• 2013

In this paper, an optical system was designed for 3D imaging laser radar with optical scanner. In order to make it easy to scan, the system was designed to inscribe the transmitting objective lens in the receiving lens. In transmitting optics, the beam expander was designed to have a zoom mechanism so that the transmitted beam size would be 4.8 m or 6.8 m at 1 km distance, when the laser source's numerical aperture value is between 0.13 and 0.22. The beam diameter at the target 1 km away was confirmed by design program. The receiving optics for the returning beam from the target was designed for the $16{\times}16$ array detector with $100{\mu}m$ pixel width. The spot diameter in every pixel was designed and verified to be less than $55{\mu}m$. The receiving optics' obscuration ratio by transmitting optics was 11%.

• Korean Journal of Applied Biomechanics
• /
• v.24 no.1
• /
• pp.51-57
• /
• 2014

The purpose of this study was to compare and analyze kinetic variables of lower limbs according to types of ankle taping in drop landing. For this, targeting seven male basketball players (average age: $20.8{\pm}0.74yrs$, average height: $187.4{\pm}3.92cm$, average weight: $79.8{\pm}7.62kg$) with no instability of ankle joints, the drop landing motion was conducted according to three types of inelastic taping (C-type), elastic taping (K-type), and no treatment (N-taping). Based on the result, the next conclusion was reached. First, the effect of taping for the players with stable ankles was minimal and the high load on ankle joints offset the fixing effect of inelastic taping. Thus the inelastic taping for the players with stable ankles did not have an effect on the control of dorsal flexion during one-foot landing. Second, increasing angular velocity by increasing the movable range of knee joints disperses impact forces, yet inelastic taping restricted the range of knee joint motion and at the same time increased angular velocity, adding to a negative effect on knee joints. Third, inelastic taping induced inefficient motion of Lower limbs and unstable impact force control of ankle joints at the moment of landing and produced maximum vertical ground reaction force, which led to an increase of load. Therefore, inelastic ankle taping of players whose jump actions occur very often should be reconsidered. Also, it is thought that this study has a great meaning in proving the problem of inelastic taping related to knee pain with unknown causes.

• Korean Journal of Veterinary Service
• /
• v.43 no.3
• /
• pp.155-159
• /
• 2020

This study was conducted to investigate the infection of livestock diseases using 500 blood samples from wild boars captured in six cities and one county in northern Gyeonggi province, South Korea. We examined 239 cases of classical swine fever virus (CSFV), and each of 500 cases of foot and mouth disease virus (FMDV), porcine reproductive and respiratory syndrome virus (PRRSV), porcine circovirus type 2 (PCV2), Mycoplasma hyopneumoniae (MH), Actinobacillus pleuropneumoniae (APP), Pasteurella multocida type A (PMA), Hemophilus parasuis (HP), Salmonella (Sal.) spp. infections. Antibodies were detected against CSFV (23.4%), PRRSV (4.0%), PCV2 (60.4%), MH (3.0%), APP (69.2%), PMA (52.8%), HP (11.8%), and Sal. spp. infections (37.2%). No antibodies were detected against FMDV. As a result of antigenic analysis of 68 positive cases (13.6%) out of 500 PRRS antigen tests, 61 North American cases, 6 European cases, 1 North American-European complex case. PCV2 has 158 positive cases (31.6%) out of 500 antigen tests, and the results indicate that a considerable number of individuals are infected. To our knowledge, this is the first seroprevalence report of MH, APP, PMA, HP, and Sal. spp. infections in wild boars in South Korea.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.1
• /
• pp.1-12
• /
• 2011

This study tests the performance of the recommended winter dress OnMapsi for an office worker through the analysis of skin temperature changes according to the heating environment. We tested and compared the effects of with/without undergarments for 4 male subjects in an artificial-climate chamber with two air temperatures of $19^{\circ}C$ and $22^{\circ}C$, $50{\pm}10%$ R.H. During the 60 minute experiment that simulated office work, the subjective feelings (that included thermal, humidity and comfort sensation, and skin temperature) were measured at equal intervals. The results show that the forehead and chest skin temperatures were not affected by air temperature or clothing type, while the hand and foot skin temperatures were affected at $0.3-0.9^{\circ}C$ depending on clothing type and $1.9-2.2^{\circ}C$ depending on air temperature. The mean skin temperature was decreased by the experimental time pass more with regular formal wear than with OnMapsi. The second experiment located the ambient temperature in which subjects wearing OnMapsi show equal skin temperaturesto those without undergarments at $22^{\circ}C$. Therefore it is possible to decrease heating temperatures to $18-21^{\circ}C$ in the office for winter OnMapsi wear that produces a skin temperature and thermal sensation that is the same as those at $22^{\circ}C$.

• The Journal of Internal Korean Medicine
• /
• v.39 no.4
• /
• pp.741-750
• /
• 2018

Objectives: To evaluate the degree of satisfaction about a specialized treatment type smoking cessation camp conducted by a Korean medicine hospital. Methods: The subjects of this study were 112 patients who enrolled smoking cessation camp from September 2015 to December 2017 at ${\bigcirc}{\bigcirc}$ Korean medicine hospital of ${\bigcirc}{\bigcirc}$ University. Patients received Korean medical treatment, including acupuncture, herbal medicine, counseling, education, stretching, hand and foot baths, and hiking. Each patient filled in a satisfaction survey after completion of the camp. Results: Drug satisfaction of the nicotine patch was $8.0{\pm}1.9$ points, nicotine gum was $7.5{\pm}2.6$ points, Cheongpye-tang was $7.8{\pm}2.5$ points, and Bopye-tang was $7.6{\pm}2.8$ points. Acupuncture was the most favorable treatment among the 12 programs, followed by education and herbal medicine. Confidence after the camp was $8.8{\pm}1.4$ points compared to $6.6{\pm}2.4$ points before the camp. An appropriate period for the camp was 7 days (40%). Conclusions: After participating in the smoking cessation camp, most patients feel considerable satisfaction. Further study is required.

• Journal of the Korean Society for Precision Engineering
• /
• v.17 no.4
• /
• pp.220-225
• /
• 2000

This paper develops a finite element model for studying occupant behavior of a mid-size truck equipped with a driver side airbag. The developed model simulates an occupant behavior using PAM-CRASH/PAM-SAFE in super computer SP2. The model is developed based on a sled test. A 50% hybrid dummy III is used for measuring head and chest accelerations and femur loads, and major injury coefficients such as HIC, CA and femur load. Inferior components such as foot rest, seat, kneebolster, crash pad, etc. are roughly modeled and defined by a rigid material model. And contact type II is used for detecting a contact with dummy. Contact type II definition uses force-deflection relationship of each body Such components as steering column which directly affect on the occupant injuy are modeled in detail and defined by an elastic-plastic material model. Airbag cushion is modeled using rivet elements. Airbag cover groove is modeled using rivet elements. Airbag tether is modeled as nonlinear bar elements. Airbag model has two vent holes to ventilating the exploded gas. Airbag is folded close to the real airbag folding procedure, and folded cautiously in order not to have initial penetration. A vehicle pulse acquired from 31mph frontal barrier test is used as input signal for the simulation. The simulation conditions are tuned to the sled test ones. The measured dummy accelerations and major injury coefficients, and filmed dummy behavior and airbag inflation process using high speed camera are compared to the simulation results to verify the developed finite element model.

• Journal of radiological science and technology
• /
• v.22 no.1
• /
• pp.49-53
• /
• 1999

To inquire its usefulness of the clinical application of intelligent replenishment system of automatic X-ray film processor based on film density, we processed the serial 300 sheets of radiographic film of chest [$14{\times}14"$, HR-C type] and bone [elbow & ankle($8{\times}10"$), skull($10{\times}12"$), hand & foot($11{\times}14"$), pelvis($14{\times}17"$), HR-G type, 68, 70, 77, 85 sheets respectively]. We analyzed the characteristic corves, relative speeds, average gradients and base plus fog densities every twenty five sheets. We also evaluated the developer and fixer replenishment volumes every that time. In the chest and bone radiograph two all, the characteristic curves were little change, and the relative speeds, average gradients and base plus fog densities were within the maximum control limits. The average developer replenishment volumes were about 43m1/sheet and 39m1/sheet respectively. It brings decreased results about 29% in comparison with the conventional replenishment system. In our experiences, we conclude that the intelligent replenishment system of automatic X-ray film processor based on film density maintains image quality consistently, decreases also the replenishment volumes. Therefore, this system will be resulted in economic and environmental effects, and solve problems of over and low replenishment volume.

• Korean Journal of Applied Biomechanics
• /
• v.21 no.2
• /
• pp.161-171
• /
• 2011

The purpose of this study was to identify biomechanical characteristics of glide and delivery motion of In-Sung Hwang, player who is a member of the national team among the finalists in the men's shot put at the 2010 National Sports Festivals. Three-Dimensional motion analysis using a system of 3 video cameras at a sampling frequency of 60 Hz was performed for this study. During the glide and delivery phase the results showed following characteristics; 1) The glide type was suitable for the short-long technique, but the trajectory of shot at the glide and delivery phase showed a different trajectory pattern with "S-shaped" type of elite players due to many deviating from central axis of the APSS(athletic-plus shot system). 2) Left knee was more flexed during failed trials compared to successful trials but COG was higher. Therefore, the player showed less stability of COG as he may not get enough breaking force at the left foot. 3) Furthermore, it would be required to have strong muscle power at the trunk, throwing arm, and the lower extremity in order to achieve maintain a low projection angle of the release.