• The Journal of the Korea Contents Association
• /
• v.16 no.6
• /
• pp.123-134
• /
• 2016

As the internet of things has come into the spotlight, wearable devices have been emerging as a new and growing market and the next hot thing in the world. However, wearable device growth in the market has not met expectations. For continued growth and diffusion of wearable devices, it is important to investigate user resistance factors to them. This study gives attention to people who have resistance to wearable devices' tendency towards innovative uses. Specifically, this study is intended to find out which factors influence consumers' resistance and intention to use wrist-worn wearable devices, which are in high demand among wearable device. Results of the study show that the relative advantage, innovation expectation, complexity, financial risk and physical risk are the predictors of innovation resistance on wrist-worn wearable devices. And consumers' resistance affects the intention of positive acceptance. These findings confirm the importance of consumer resistance to the wrist-worn wearable device.

• Journal of radiological science and technology
• /
• v.22 no.2
• /
• pp.33-39
• /
• 1999

This paper included a data analysis of the unit of medical devices using mainternance recording card that had medical devices of unit failure mode, hospital of failure mode and MTBF. The results of the analysis were as follows : 1. Medical devices of unit failure mode was the highest in QC/PM such A hospital as 33.9%, B hospital 30.9%, C hospital 30.3%, second degree was the Electrical and Electronic failure such A hospital as 23.5%, B hospital 25.3%, C hospital 28%, third degree was mechanical failure such A hospital as 19.5%, B hospital 22.5%, C hospital 25.4%. 2. Hospital of failure mode was the highest in Mobile X-ray device(A hospital 62.5%, B hospital 69.5%, C hospital 37.4%), and was the lowest in Sono devices(A hospital 16.76%, B hospital 8.4%, C hospital 7%). 3. Mean time between failures(MTBT) was the highest in SONO devices and was the lowest in Mobile X-ray devices which have 200 - 400 failure hours. 4. Anverage failure ratio was the highest in Mobile X-ray devices(A hospital 31.3%, B hospital 34.8%, C hospital 18.7%), and was the lowest in Sono(Ultrasound) devices (A hospital 8.4%, B hospital 4.2%, C hospital 3.5%). 5. Failure ratio results of medical devices according to QC/PM part of unit failure mode were as follows ; A hospital was the highest part of QC/PM (50%) in Mamo X-ray device and was the lowest part of QC/PM(26.4%) in Castro X-ray. B hospital was the highest part of QC/PM(56%) in Mobile X-ray device, and the lowest part of QC/PM(12%) in Gastro X-ray. C hospital was the highest part of QC/PM(60%) in R/F X-ray device, and the lowest a part of QC/PM(21%) in Universal X-ray. It was found that the units responsible for most failure decreased by systematic management. We made the preventive maintenance schedule focusing on adjustement of operating and dust removal.

• Journal of Digital Convergence
• /
• v.18 no.9
• /
• pp.379-389
• /
• 2020

This is a qualitative study about Google 'Nest Hub Max' that displays proactive intelligent personal assistant. Following the step of grounded theory, an in-depth interview for 6 users who had used this device for a month was taken. 186 concepts were discovered, categorized as 11 top-categories and 24 sub-categories. Paradigm diagram, considering axis-coding, was made and it have been narrowed down to 'Usage patterns' of proactive IPA, considering selective coding aspects. 'Usage patterns' were divided to passive and active user. Thus, neither passive user nor active user was satisfied about device and proactive IPA. This study is meaningful that it constructed basic data about the user experience of proactive IPA on this device. It will support the device or service that consists proactive IPA in the future.

• Journal of Digital Convergence
• /
• v.13 no.5
• /
• pp.195-204
• /
• 2015

This paper CTQ(Critical to Quality) to draw, aim to derive a key quality factor reflects the customer's requirements by utilizing the QFD technique for sparkling water purifier device that combines the new module. Tasting participants, consumers and New Module device intended for developers who develop and conduct a survey and FGI (Focus Group Interview) VOC(Voice of Customer) to draw, drawn by the EC through the developer VOC and EC (Engineering Characteristic) and charts the relationship between the phases was prepared HOQ(House of Quality). Sparkling water purifier through the HOQ chart certain taste, sound, running water, CO2 cylinder replacement cycle, we obtain results that element is an important quality factors such as ease of use. These factors are closely related to each component regulators and Module device (mixing) associated with the taste of water, booster pumps, and deliver results that the solenoid is considered the most critical part.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.433-443
• /
• 2022

Purpose: In this paper, we propose a study of deep learning algorithms that estimate and predict sarcopenia by exploiting the high penetration rate of smart devices. Method: To utilize deep learning techniques, experimental data were collected by using the inertial sensor embedded in the smart device. We implemented a smart device application for data collection. The data are collected by labeling normal and abnormal gait and five states of running, falling and squat posture. Result: The accuracy was analyzed by comparative analysis of LSTM, CNN, and RNN models, and binary classification accuracy of 99.87% and multiple classification accuracy of 92.30% were obtained using the CNN-LSTM fusion algorithm. Conclusion: A study was conducted using a smart sensoring device, focusing on the fact that gait abnormalities occur for people with sarcopenia. It is expected that this study can contribute to strengthening the safety issues caused by sarcopenia.

• The Journal of the Korea Contents Association
• /
• v.22 no.5
• /
• pp.424-434
• /
• 2022

This study is to verify the mediating effect of self-esteem on the effect of the elderly's smart device use on life satisfaction. To this end, secondary data analysis was conducted using the Korea Media Panel Survey conducted by the Information and Communication Policy Institute in 2021. The responses of 3,211 people in their 60s or older who are the subjects of this study were utilized. For analysis, descriptive statistics, correlation, and multiple regression analysis were performed using SPSS, and the Sobel test was conducted to verify mediating effects. As a result, smart device utilization averaged 2.13 points out of 5, indicating that the actual utilization level was less than half. The use of smart devices, an independent variable, had a positive effect on the dependent variable, life satisfaction. Self-esteem, which is a parameter, has been verified as a partial mediating effect in that smart device use affects life satisfaction. Based on the results of this study, various policy and practical measures were proposed to increase the smart device utilization rate of the elderly in Korea, improve self-esteem and life satisfaction, so that they can spend a happy old age.

• Journal of muscle and joint health
• /
• v.25 no.1
• /
• pp.39-49
• /
• 2018

Purpose: The purpose of this study was to investigate the effect of technostress on intent-to-persist focusing on the stress coping in nursing college students. Methods: A cross-sectional descriptive design was conducted with a survey of 153 nursing college students attending a university. Data were collected using self-administered questionnaires. For data analysis, descriptive statistics, t-test, one-way ANOVA, Pearson's correlation coefficients, and multiple regression, hierarchical analysis, and sobel test were performed using SPSS/WIN 23.0 for Windows. Results: The factor mediating technostress and intent-to-persist in nursing college student was emotion-focused coping behavior. Moreover, this mediating factor had a complete mediating effect between technostress and intent-to-persist in nursing college students. Conclusion: Based on this result, it will be necessary to develop educational strategies about smart device use and environmental supports that help them communicate about problems.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2004.05a
• /
• pp.351-351
• /
• 2004

For greeting the era of ubiquitous network, data storage devices have been essentially attached to mobile data devices. As a result, the minimization of the storage device has arisen as major interests in the next generation data storage technology. So, there are many researches for the small form factor ODD. In this paper, we propose a pick up that consists of a linear VCM and 2-wire focusing actuator for a small form factor ODD. For the sake of checking performance of the coarse actuator, PID controller is designed. Experiment with controller and DSP board shows its propriety as a fine tracking actuator. And, 2-wire suspension actuator is designed in order to be contained in a coarse actuator and to satisfy the thickness of a PCMCIA type. Through the experiment of designed actuator, It verifies performance as a focusing actuator.

• Proceedings of the KIPE Conference
• /
• 2007.07a
• /
• pp.447-448
• /
• 2007

Product development is consisting by trend that accommodate almost function digital cam in camera phone that can speak of Mobile appliance, and competition about number of elemental area of image sensor is consisting for market prior occupation between these. Propose in this research and small size camera phone self-focusing adjustment actuator that do city manufacture is similar with general storehouse pickup actuator drive way, but selected in cylindrical to reduce space that lens holder occupies because there is restriction loading of lens and space enemy. Target number of research established that execute drive displacement more than $600{\mu}m$ in 2.75V that is house voltage that is used in Mobile device that is general. Also, described about maximum transfer displacement characteristic, displacement response characteristic, hysteresis, response characteristic, smallest transfer step characteristic, actuator's drive characteristic that is manufactured to examination item of maximum consumption electric power by special quality estimation system that apply laser displacement sensor that produce itself to evaluate city manufactured actuator's special quality.

• Fashion & Textile Research Journal
• /
• v.24 no.6
• /
• pp.766-774
• /
• 2022

In this study, the fit of commercial sports bras was analyzed according to various design variations, focusing on the shape of the shoulder strap, which is known to cause great discomfort in wearing sports bras. Experimental clothes were set to four commercially available sports bras with different shoulder strap shapes. The results showed that, in "size suitability," the overall satisfaction with experimental clothing B, of which the shoulder strap can be adjusted, was the highest, especially for "underbust circ. fit," "bust circ. Fit," and "shoulder strap length." In the "Shape suitability" and "Wearability" sections, experimental clothing B also showed the highest satisfaction and the shoulder strap adjustment device did not negatively affect wearing satisfaction. In the question on "side wings rolled up," experimental clothing A also received a relatively good score, which is due to its long front length. In the "Compression of the front center" section, the responses for experimental clothing A and B were "appropriate" and for C and D, they were "pressurized." In "motion suitability" as well, satisfaction with experimental clothing B was the highest, followed by experimental clothes A, C, and D. In the "body shape correction" section, clothing B elicited the highest satisfaction, followed by experimental clothes A, C, and D, in that order. Overall, it is recommended that shoulder straps be applied with adjustable straps for the comfort of the shoulder area while wearing sports bras.