• Korean Journal of Poultry Science
• /
• v.16 no.3
• /
• pp.157-167
• /
• 1989

Pretreatment of egg white and ion exchange resins was attempted to separate lysozyme from egg white efficiently. Apparent viscosity of egg white could be decreased to 3cp by homogenization for 30 minutes at 2, 000rpm and ultrasonication for 45 minutes. The result of testing adsorption capacity of lysozyme was as follows； CM-Sephadex C-25 ＞Duolite C464＞Amberlite C-50＞Dowex MSC-1＞Amberlite IRC-50＞Amberlite IRC-84. Although CM-Sephadex C-25 showed highest adsorption capacity of lysozyme, egg white could not eluted easily. Duolite Cf64 was selected based on relatively high lysozyme adsorption and good egg white eluting property for separation of egg white lysozyme. Na$^{＋}$ form of Duolite C-464 was most effective on adsorption of Iysozyme. To separate lysozyme from egg white efficiently rinse buffer and eluting solution were selected 0.1M sodium phosphate buffer at pH 6.5 and 10% ammonium sulfate respectively. After separating lysozyme from egg white, foaming power of egg white was decreased to 85.3%. Color of egg white gel was not changed while hardness of egg white gel was decreased by 30% after separating lysozyme. However, elasticity of egg white gel was increased by 13% in lysozyme-separated egg white.

• Applied Chemistry for Engineering
• /
• v.16 no.6
• /
• pp.772-777
• /
• 2005

Porous hydrated lime and limestone filters were prepared by foaming and gelcasting method, and their physical properties were evaluated. Through these analyses, it has been found that with the increased porosity and pore size of the filters, majority of pores in the filters were inter-connected by windows. Also, $SO_2$ removal efficiency for the filters was investigated. As the porosity and the reaction temperature increased, $SO_2$ removal efficiency also increased. Especially, unlike the variation of entrance concentration, the entrance flow rate had great influence on the removal efficiency. In case of the filters with an equal porosity, the hydrated lime filter had superior removal efficiency compared to the limestone filter. From these results, it was shown that the high conversion ratio to CaO from the hydrated lime filter was a result of facilitated formation of $CaSO_4$ by $SO_2$.

• The Korean Journal of Food And Nutrition
• /
• v.17 no.4
• /
• pp.450-457
• /
• 2004

In wine making, to perform yeast culture effectively, which is the most important factor, 5 strains of representative active dry yeasts were selected : Montrachet, Pasteur Champagne, Epernay II, Prise do Mousse, Lalvin W15. The results about fermentation properties were as follows. After 1 day of fermentation, the ethanol contents of Lalvin W15 wine and Montrachet wine were 5.4% and 4.0%. After 2 days of fermentation, the ethanol content of Lalvin W15 wine was 9.2%, which is the highest degree among all experimental groups. As for the content of sugar solution, the wine fermented by Lalvin W15 was the highest one. In acidic solution, fermentation activity of Prise de Mousse, Lalvin W15, Montrachet were highest degrees and Red wine fermentation activity of Prise de Mousse has shown the highest degree in its fermentation activity, if only initial SO$_2$ amounts were 200 ppm. In regard to the foaming tendency during fermentation, the size of foams in Montrachet was big and the amount of foams was a lot. The change in Brix during the fermentation became evident after two days. The Brix of Montrachet wine and Lalvin W15 wine was 3.0, a high initial fermentation speed. After 10 days of fermentation, total acidity of Lalvin W15 wine was 0.99g/100m1, the highest degree. After 3 days of fermentation, the ethanol content of Lalvin W15 wine was 7.4%, the highest degree. But after 9 days of fermentation Epernay II showed the higher ethanol concentration to 13.8%.

• Applied Chemistry for Engineering
• /
• v.30 no.5
• /
• pp.597-605
• /
• 2019

In order to improve the adhesion of water-based adhesive, gemini type nonionic reactive surfactants were synthesized and applied to water-based adhesives. The surfactants were synthesized by using maleic acid and polyoxyethylene cetyl ether having different length of ethylene oxide and confirmed by FT-IR and $^1H-NMR$. Their appearance was light yellow wax. The cloud point of the compound was more than $78^{\circ}C$. The measured critical micelle concentration (c.m.c) was $1.0{\times}10^{-4}{\sim}7.0{\times}10^{-4}mol/L$ and surface tension at c.m.c was 25.9~32.0 mN/m. As the number of ethylene oxide increased, the emulsifying power was improved. The foaming height of each compound by Ross-Miles method was 1.4~4.5 cm. The synthesized surfactants was then used as an emulsifier in emulsion polymerization of water-based adhesives and its physical properties were evaluated. The solid contents of prepared adhesives was 59%. The average particle size and initial tackiness of the prepared adhesives were 164~297 nm and ball no. of 20~32, respectively. The peel strength was $1.8{\sim}2.1kg_f/mm$. The retention rate of adhesives viscosity was evaluated to 99% during 30 days. Therefore, synthesized gemini type nonionic reactive surfactants are expected to be applied as an emulsifier for the high adhesive force.

• Journal of Korean Tunnelling and Underground Space Association
• /
• v.23 no.6
• /
• pp.503-516
• /
• 2021

Autonomous fire detection and suppression system requires advanced technology for complex detection technology and injection/control technology for accurate hitting by fire location. Also, foam spraying should be included to respond to oil fires. However, when a single spray monitor is used in common, water and foam spray properties appear different, so for accurate fire suppression, research on the spray trajectory and distance will be required. In this study, experimental studies and numerical analysis studies were combined to analyze the foam spray characteristics through the spray monitor developed for the establishment of an autonomous fire extinguishing system. For flow analysis of foam injection, modeling was performed using OpenFOAM analysis software, and the commonly used foaming agent (Aqueous Film-Forming Foam) was applied for foam properties. The injection distance analysis was performed according to the injection pressure and the injection angle according to the form of the foam, and at the same time, the results were verified and presented through the injection experiment.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.56 no.1
• /
• pp.7-20
• /
• 2023

Boil-dried concentrate (BDC) and steam-dried concentrate (SDC) were prepared from olive flounder Paralichthys olivaceus roe using the cook-dried process, and their food functionality and in vitro bioactivity were examined. The buffer capacity of BDC and SDC was found to be stronger in the alkaline region than in the acidic region, and the buffer capacity of SDC was superior to that of BDC. The water holding capacities of these concentrates were 7.6 and 7.4 g/g protein, respectively, both of which were significantly lower than that of freeze-dried concentrate (FDC). The solubility of BDC (13.4%) and SDC (12.7%), foaming capacity of BDC (107.7%) and SDC (110.6%), and oil-in-water emulsifying activity index of BDC (7.7 m²/g) and SDC (9.7 m²/g) were all significantly lower than the corresponding values for FDC (P<0.05). The lower food functionality of BDC and SDC compared with FDC can be attributed to the high-temperature denaturation of proteins during the cook-dried process. The 2,2'-azino-bis-3-ethylbenzothiazoline-6-sulfonic acid radical scavenging activities (IC₅₀) of SDC (2.5 mg protein/mL) was 60.4 ㎍/mL, and the angiotensin I converting enzyme inhibitory activity was 80.9%. Olive flounder roe concentrates have good antioxidant and antihypertensive activities, and can be used as materials or ingredients in the processing of seafood and other foods to enhance protein contents and food functionality.

• Applied Chemistry for Engineering
• /
• v.34 no.3
• /
• pp.264-271
• /
• 2023

In this study, ASCO^Ⓡ SLES-430 surfactant was synthesized by adducting 3 moles of ethylene oxide and 1 mole of propylene oxide to lauryl alcohol followed by a sulfation process, and the structure of the synthesized ASCO^Ⓡ SLES-430 was elucidated by performing FT-IR, ¹H-NMR and ¹³C-NMR analyses. Interfacial properties such as critical micelle concentration, static surface tension, emulsification index, and contact angle were measured, and environmental compatibility indices such as oral toxicity and skin irritation were also estimated for ASCO^Ⓡ SLES-430. Both results were compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328 SLES surfactants possessing 2 moles and 3 moles of ethylene oxide, respectively. In particular, both foaming ability and foam stability were evaluated for ASCO^Ⓡ SLES-430 and compared with ASCO^Ⓡ SLES-226 and ASCO^Ⓡ SLES-328, which have been widely used in detergent products, in order to test the potential applicability of ASCO^Ⓡ SLES-430 in detergent product formulation for a small capacity built-in washing machine.

• Composites Research
• /
• v.19 no.1
• /
• pp.9-14
• /
• 2006

Experimental investigation on heat transfer ratio was firstly performed with three types of sandwich panels such as the Carbon/Epoxy Skin-Aluminum Honeycomb and Balsa Core Sandwich Panel of 37mm thickness, the Carbon/Epoxy Aluminum Skin-Honeycomb Core Sandwich Panel of 57mm thickness (including insulator) and the Carbon/Epoxy Skin-Aluminum Honeycomb Core Sandwich Panel of 37mm thickness based on the KS F 2278:2003(Insulation test method of windows). In additional to this investigation, experimental tests were also done for evaluation of heat transportation ratio with the Aluminum Skin- Aluminium Honeycomb Sandwich Panels of 27mm and 35mm thickness, and Aluminum Skin-Foaming Aluminum Sandwich Panel of 27mm thickness by the KS F2277:2002 (Insulation measuring method of construction component-Calibration heat box method or protective heat box method). In this study, it was found that the larger net heat transfer cross sectional area between the skin and the sandwich core is given, the higher heat transportation ratio occurs. It was also found that the hybrid type insulation had better insulation characteristics compared to the non-hybrid type insulation.

• Korean Journal of Food Science and Technology
• /
• v.54 no.1
• /
• pp.94-102
• /
• 2022

Defatted soybean, larvae of brown mealworm (Tenebrio molitor), and powdered pupae of silkworm (Bombyx mori) were fermented in solid and liquid forms using Aspergillus oryzae and Bacillus subtilis. The protein degradation rate (NDR) through solid fermentation was the highest in the fermented soybean control sample (54.69±6.54%), followed by silkworm pupae (34.82±5.99%) and brown mealworm larvae (30.54±3.80%). When these edible insects were fermented in liquid form, solid extraction yield was 37.73-46.88%, and protein yield was 47.47-63.02%. NDR of fermented liquid form products increased to 58.90, 52.62, and 50.13% for soybean, brown mealworm larvae, and silkworm pupae, respectively. SDS-PAGE of the liquid fermented products confirmed that microbial fermentation decomposed higher-molecular-weight proteins into small polypeptides. In vitro digestibility of liquid forms of edible insects increased by 1.26 to 1.53 times after fermentation. The protein solubility, foaming ability, and foam stability of liquid-fermented edible insects all tended to increase through fermentation.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.12 no.2
• /
• pp.121-127
• /
• 2024

In this study, the applicability of replacing DG(Desulfurized Gypsum) from oil refinery with CCCMs(Carbon dioxide Conversion Capture Materials) as an ALC(Auto-claved LIghtweight Concrete) raw material was examined, and basic properties of ALC was measured. The main chemical components of DG and CCCMs were CaO and SO₃, and an increase in LOI(Loss of ignition) due to mineral carbonation reaction was verified. The crystalline phases of CCCMs were CaCO₃, CaSO₄, Ca(OH)₂, and CaSO₄·2H₂O. When DG, a raw material for ALC production, was replaced with CCCMs, foaming height, pore shape, absolute dry gravity, and compressive strength results measured similar for all binders. In addition, the formation of tobermorite which is main crystalline phase of ALC was shown for all specimens in microstructural analysis.