• 한국화재소방학회논문지
• /
• 제29권3호
• /
• pp.48-52
• /
• 2015

이 연구는 기존의 미터링 오리피스보다 유량계수가 작은 미터링 벤츄리를 이용하여 포소화약제 혼합장치를 실무에서 주로 사용하는 직경으로 제작하여 혼합비가 적정한지를 평가한 연구로써 3%용 혼합비의 경우 가압수 직경 76.2 mm(포원액 직경 31.75 mm)는 3.1~3.5%의 혼합비의 변화를 나타내었고, 가압수 직경 101.6 mm(포원액 직경 38.1 mm)는 3.3~3.7%의 변화를 나타내어 포소화약제혼합장치등의 성능인증 및 제품검사의 기술기준인 3.0~3.9%를 만족하는 것을 알 수 있었다. 6% 혼합비의 경우 가압수 직경 76.2 mm는 6.4~6.8%의 혼합비의 변화를 나타내었고, 가압수 직경 101.6 mm는 6.25~6.5%의 변화를 나타내어 포소화약제혼합장치등의 성능인증 및 제품검사의 기술기준인 6.0~7.0%를 만족하는 것을 알 수 있었다.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2006년도 추계학술대회
• /
• pp.172-175
• /
• 2006

Steam reforming of methane using Xe-arc solar simulator was studied for converting solar radiation into energy foam that one can readily utilize. The Xe-arc lamp produce a spectrum similar to that of the sun. SiC ceramic foam, resist high temp.$(>900^{\circ}C)$, is used to catalytically active foam absorber, and to support of reforming catalyst. The catalyst on the surface of foam were directly irradiated with solar simulated xe-light in order to carry out the steam reforming of methane. The reactor was made of stainless steel and quartz window was located on a place of the xe-light irradiation and temperature was controlled using K-type thermocouple in contact with catalyst located inside the reactor. The result show that a possibility of solar reforming using catalytically active foam absorber is exist.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2001년도 추계학술대회논문집A
• /
• pp.38-43
• /
• 2001

The interfacial adhesive joining characteristics of the foams are very important for the structural integrity of sandwich structures. Peel strength is one of the best criteria for the interfacial characteristics of the sandwich structures and peel energy is most commonly used for the interfacial characteristics. The peel strength is the first peak force per unit width of bond line required to produce progressive separation by the wedge or other crack opening type action of two adherends where one or both undergo significant bending and the peel energy is the surface active energy per unit width of bond line. In this work, to investigate the strengthening effect of resin treatment on the interfacial surface of foam material, peel strength and peel energy of epoxy resin treated polyurethane foam core sandwich structures were obtained by the cleavage peel tests and compared with those of non surface treated polyurethane foam core sandwich structures.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2011년도 춘계 학술논문 발표대회 1부
• /
• pp.123-125
• /
• 2011

Pre-foaming that has been used in this study is using to control and guarantee quality, but the optimum mix proportion and regulation are not definite. Therefore, this study investigated properties of foamed concrete according to concentrations of foaming agent to improve usability of foamed concrete. Synthetic foaming agent such as AES(Alkyl Ether Sulfate) and AOS(Alpha Olefin Sulfonate) are used to make foam with 1, 3, and 5% concentrations. We found that the flow of foam concrete increases when foam concentration is high and AES is more flowable than AOS. Density and compressive strength increase when foam concentration is low.

• 대한조선학회논문집
• /
• 제51권6호
• /
• pp.495-502
• /
• 2014

Glass-reinforced polyurethane foam (R-PUF) is widely used as the primary and secondary insulation of Mark-III type liquefied natural gas (LNG) cargo system. And, polyurethane foam (PUF) and polyisocyanurate foam (PIR) are often used for insulation of onshore structures or LNG storage and pipeline system. These polymeric foam materials are known for the characteristics that mechanical properties are dependent on strain rate and temperature. In this study, compression tests for R-PUF, PIR, and PUF were carried out for the estimation of mechanical behaviors under the cryogenic environment. The range of thermal condition was from room temperature to 110K and strain rates were $10^{-3}s^{-1}$ and $10^{-4}s^{-1}$. The test results were analyzed based on the conditions of strain-rate and temperature.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• 한국안전학회지
• /
• 제29권2호
• /
• pp.18-23
• /
• 2014

Foam extinguishing agent is widely used for extinguishing combustible liquid fires. Compared to other foam type extinguishing agents, protein foam has relatively low cost and low toxicity and produces stable foam blanket which is excellent in heat resistance and sealability, despite it has weak fluidity. Therefore the study investigated foaming characteristics followed by various factors affecting the fluidity of the protein foam extinguishing agent. The extinguishing characteristics differentiated by the changes in fluidity were also experimented. Foaming performance was compared by measuring the expansion ratio and the 25% drainage time. Moreover, the 25% drainage time and the extinguishing time was compared. The results showed that the 25% drainage time and the expansion ratio were increased as the pressure of nozzle and the concentration of hydrolyzed protein liquid enlarged. However the foaming and extinguishing performance were not improved when the condition exceeded certain level of pressure and concentration. The fastest fire extinguishing condition was the nozzle pressure 4bar with the 85wt.% of concentration of hydrolyzed protein liquid.

• 대한기계학회논문집B
• /
• 제25권9호
• /
• pp.1263-1271
• /
• 2001

An experimental study is carried out for an aluminum foam heat sink attached to an isolated heat source to evaluate high potential of aluminum foam as a heat sink with impinging jets. The effects of the pore density and the height of the aluminum foam heat sink, the jet Reynolds number, and the nozzle diameter are delineated in comparison with a conventional pin type heat sink. It is found that the aluminum foam with small pores is inefficient for the heat transfer enhancement due to the large flow friction at the given porosity. In the parameter ranges of the present study, the change in the nozzle diameter shows no significant effects on the surface temperature of the aluminum foam heat sink at a given Reynolds number. The heat transfer enhancement is strongly dependent on the jet Reynolds number and shows a maximum value at a moderate Reynolds number.

• Elastomers and Composites
• /
• 제47권3호
• /
• pp.246-253
• /
• 2012

본 연구에서 중온아스팔트를 제조하기 위하여 우레탄폼 제조기술과 유화아스팔트 제조기술을 이용하여 폼아스팔트를 제조하였다. 화재에 약한 폼 물질과 아스팔트의 취약점을 보완하기 위하여 난연제를 첨가하여 난연성 폼아스팔트를 제조하였다. 폼아스팔트의 표피는 구멍이 뚫려 있었고 내부구조는 열린 셀의 모양을 하고 있었다. NCO%가 높을수록 폼의 강도와 셀의 크기는 증가하였다. 아스팔트는 폼의 강도를 증가시켰다. 하지만 난연제는 폼의 강도를 떨어뜨렸다. 사용된 3가지 난연제(멜라민, 디메틸포스포네이트, 트리토릴포스페이트) 중에서 멜라민이 가장 난연효과가 적었고 트리토릴포스페이트가 가장 효과가 크게 나타났다.

• Korean Chemical Engineering Research
• /
• 제43권4호
• /
• pp.452-457
• /
• 2005

실리카라이트 폼에 $0.2{\mu}m$ 정도의 가는 MFI 제올라이트 입자를 담지하여 만든 폼(foam) 촉매에서 n-옥탄의 분해반응을 조사하였으며, 생성물 분포에 Delplot 기법을 적용하여 반응기구를 고찰하였다. 담지된 MFI 제올라이트의 Si/Al 몰비는 25로 추정되며, 담지량은 실리카라이트 폼의 25 wt％이었다. 겉보기 밀도는 $0.11g{\cdot}cm^{-3}$로 낮아 촉매 충전량을 0.02 g에서부터 0.5 g까지 바꿀 수 있어서 압력손실 없이 반응물과 생성물의 체류시간을 폭 넓게 조절하였다. 촉매 충전량이 많아지면 n-옥탄의 전환율과 올레핀 수율이 높아졌다. 촉매를 조금 사용하였을 때 생성물 분포는 단순하여 양성자 분해기구로 설명할 수 있었다. 촉매 사용량이 많아지면 분해 생성물의 추가 반응이 진행되어 반응성이 낮은 올레핀과 파라핀의 함량이 많아지며 생성물 분포가 복잡해졌다.