• 항공우주시스템공학회지
• /
• 제1권1호
• /
• pp.36-44
• /
• 2007

This study was performed on preliminary structural design of a small scale WIG craft which has been developed as a next generation high speed maritime transportation system in Korea. A composite structure design using the foam-sandwich for main wing and tail fins and the honeycomb sandwich and skin-stringer-ring frame for fuselage was applied for weight reduction as well as structural stability. A commercial FEM code, NASTRAN for was utilized to confirm the structural safety for the reiterate design modifications to meet design requirements including the target weight. Each main wing was jointed with the fuselage by eight high strength insert bolts for easy assembling and disassembling as well as for assuring the required 20 years service life. For control surface structural design, the channel type spar, the foam sandwich skin and the lug joint were adopted.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제66차 하계학술대회논문집 30권2호
• /
• pp.553-556
• /
• 2022

본 논문에서는 거품 입자를 활용하여 시뮬레이션 장면에 맞는 소리를 효율적으로 합성할 수 있는 기법을 제안한다. 물리 기반 시뮬레이션 환경에서 소리를 표현하는 대표적인 방법은 생성과 합성이다. 사운드 생성의 경우 시뮬레이션 장면마다 물리 기반 접근법을 사용하여 소리를 생성할 수 있는데 계산 시간과 재질 표현의 어려움으로 다양한 시뮬레이션 장면에 대한 소리를 만들어 내기에는 쉽지 않다. 사운드 합성의 경우 소리 데이터를 미리 구축해야 하는 사전 준비가 필요하지만, 한 번 구축하면 비슷한 장면에서는 같은 소리 데이터를 활용할 수 있는 점이 있다. 따라서 본 논문에서는 거품 시뮬레이션의 소리 합성을 위해 소리 데이터를 구축하고 거품 입자의 효율적인 군집화를 통해 계산 시간을 줄이면서 소리의 사실감은 개선할 수 있는 사운드 합성 기법을 제안한다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2022년도 제66차 하계학술대회논문집 30권2호
• /
• pp.557-558
• /
• 2022

본 논문에서는 인공신경망을 통해 화면에 투영된 거품입자를 효율적으로 생성할 수 있는 기법에 대해 소개한다. 유체 시뮬레이션 기반으로 바다거품을 계산하기 위해서는 유체역학과 수치해석학에 대한 이해가 필요하며, 유속의 유기물, 풍속 등 다양한 물리적 요소를 고려해야하기 때문에 복잡하고 계산양이 커진다. 오일러리안(Eulerian)접근법에서는 격자의 해상도가 커지게 되고, 라그랑지안(Lagrangian)접근법에서는 입자의 개수가 많아지기 때문에 이 문제를 다루기 쉽지 않은 문제이다. 이러한 문제를 완화하기 위해 본 논문에서는 인공신경망을 이용한 분류 모델 학습을 통해 3차원 유체 시뮬레이션으로부터 투영된 2차원 스크린 이미지로부터 거품이 생성될 위치를 예측한다. 결과적으로 물의 스크린에 투영된 물 입자의 깊이와 가속도로부터 거품의 생성 위치를 예측함으로서 복잡한 수치해석학 없이 학습을 통해 효율적으로 거품을 표현하는 결과를 보여준다.

• 한국컴퓨터정보학회:학술대회논문집
• /
• 한국컴퓨터정보학회 2023년도 제67차 동계학술대회논문집 31권1호
• /
• pp.357-360
• /
• 2023

본 논문에서는 거품 입자의 물리적 속성을 활용하여 가상 시뮬레이션 장면에 맞는 거품 사운드를 합성하고 사운드의 물리적 현상을 기반으로 사운드의 크기를 효율적으로 제어할 수 있는 기법을 제안한다. 현실에서는 사운드의 근원지와 청중의 위치 관계에 따라 사운드 크기의 차이가 나타타는 것을 쉽게 관찰할 수 있다. 본 논문에서는 이 문제를 효율적으로 풀어내기 위해 복잡한 3차원 유체의 움직임을 분석하는 게 아닌, 2차원으로 투영된 입자의 유동을 분석하여 사운드를 합성하고 제어하는 방식을 소개한다. 우리의 방법은 거품 사운드의 크기를 효율적으로 조절할 수 있도록 스크린 공간에서 계산된 거품 입자의 속도와 위치를 활용하여 청중의 위치 관계 및 사운드의 방향성을 확인하고, 이를 통해 거품 사운드를 사실적으로 합성하였다.

• IMMUNE NETWORK
• /
• 제20권3호
• /
• pp.22.1-22.21
• /
• 2020

In the progression of atherosclerosis, macrophages are the key immune cells for foam cell formation. During hyperlipidemic condition, phagocytic cells such as monocytes and macrophages uptake oxidized low-density lipoproteins (oxLDLs) accumulated in subintimal space, and lipid droplets are accumulated in their cytosols. In this review, we discussed the characteristics and phenotypic changes of macrophages in atherosclerosis and the effect of cytosolic lipid accumulation on macrophage phenotype. Due to macrophage plasticity, the inflammatory phenotypes triggered by oxLDL can be re-programmed by cytosolic lipid accumulation, showing downregulation of NF-κB activation followed by activation of anti-inflammatory genes, leading to tissue repair and homeostasis. We also discuss about various in vivo and in vitro models for atherosclerosis research and next generation sequencing technologies for foam cell gene expression profiling. Analysis of the phenotypic changes of macrophages during the progression of atherosclerosis with adequate approach may lead to exact understandings of the cellular mechanisms and hint therapeutic targets for the treatment of atherosclerosis.

• 한국정밀공학회지
• /
• 제17권12호
• /
• pp.185-194
• /
• 2000

Rapid Prototyping(RP) techniques have their unique characteristics according to the working principles: stair-stepped surface of parts due to layer-by-layer stacking, low build speed caused by line-by-line solidification to build one layer, and additional post processing to improve surface roughness, so it is required very high cost to introduce and to maintain of RP apparatus. The objective of this study is to develop a new RP process, Variable Lamination Manufacturing using linear hotwire cutting technique and expandable polystyrene foam sheet as part material(VLM-S), and to investigate characteristics of part material, cutting characteristics by using linear hotwire cutting system and bonding. Experiments were carried out to investigate mechanical properties of part material such as anisotropy and directional tensile strength. In order to obtain optimal dimensional accuracy, surface roughness, and reduced cutting time, addition experiments were performed to find the relationship between cutting speed and cutting offset of hotwire, and heat generation of hotwire per unit length. So, adhesion strength tests according to ASTM test procedure showed that delamination did not occur at bonded area. Based on the data, a clover-shape was fabricated using unit shape part(USP) it is generated hotwire cutting. The results of present study have been reflected on the enhancement of the VLM-S process and apparatus.

• 펄프종이기술
• /
• 제48권2호
• /
• pp.56-60
• /
• 2016

Neutral or alkaline papermaking provides many advantages in paper strength and processing conditions. It also provides the opportunity of using calcium carbonate fillers in papermaking. These diverse advantages have made almost all paper machines of printing and writing papers run under neutral and alkaline conditions. On the other hand, linerboard machines, which use recycled papers as a raw material, are running under acid conditions using a rosin sizing system. Because the recycled raw materials used by the linerboard industry contain significant amounts of alkaline papers, the linerboard industry has an interest in the possibility of using the neutral or alkaline papermaking opportunity. In this study, the compatibility of the recycled linerboards under neutral or alkaline papermaking conditions was examined by recycling them under various pH conditions. The sizing degree of the papers recycled under neutral or alkaline was significantly lower than that of acid formed papers indicating that during the neutral or alkaline recycling process the rosin sized papers lost their sizing efficiency. Recycling of acid formed linerboards under neutral or alkaline conditions increased the amount of foam, and the foam contained substantial amount of solid materials derived from the acid sizing systems. Use of cationic polyelectrolytes including PEI and poly-DADMAC improved the sizing degree of the recycled papers under neutral and alkaline conditions. PEI decreased the foam generation as well while poly-DADMAC did not show any reducing effect of the foam. These results suggest that PEI forms coordinate bonds with rosin acid and precipitate them onto the surface of recycled fibers, while the reaction products between poly-DADMAC and rosin acid ions still remain water soluble under neutral or alkaline conditions.

• 대한조선학회논문집
• /
• 제55권6호
• /
• pp.490-496
• /
• 2018

The consistency of the initially designed waves in the domain is essential for accurate calculation of the added resistance in waves through CFD. In particular, unwanted reflected waves at domain boundaries can cause incorrect numerical solutions due to the superposition with initially designed waves. Euler Overlay Method(EOM) is one of the methods for reducing wave reflections by adding an additional source term to momentum and phase conservation equations, respectively. In this study, we apply the Euler Overlay Method(EOM) to the open-source CFD library, OpenFOAM(R), to simulate the accurate free-surface waves in the domain and the parametric study is performed for efficient implementation of Euler Overlay Method(EOM). Considering that the damping efficiency depends on the selection of the overlay parameter in the added source terms, the size of overlay zone and the wave steepness, the influences of these factors are tested through the wave elevation measured at constant time intervals in the 2D numerical wave tank. Through this process, guidelines for selection of optimal overlay parameter and overlay zone size that can be applied according to the scaling law are finally presented.

• 한국항공우주학회지
• /
• 제43권4호
• /
• pp.296-303
• /
• 2015

무인기 운용 환경을 고려하여 다양한 조성의 $NaBH_4$ 용액을 사용해 수소발생시스템의 성능 평가를 수행하였다. 먼저, 자발가수분해와 30분의 수소발생실험을 수행하였다. 수소의 손실, 안정한 수소 발생, $NaBO_2$의 석출, 전환 효율과 무인기의 운용을 고려하여 $NaBH_4$ 용액의 조성을 1 wt% NaOH + 25 wt% $NaBH_4$+74wt% $H_2O$로 결정하였다. 200 W급 연료전지 시스템을 위해 장시간 수소발생실험도 수행되었다. 비록 $NaBO_2$의 석출로 인해서 수소 발생률이 감소하였지만, 200 W 연료전지를 위한 수소를 3시간동안 발생(전환 효율: 87.4%)시켰다. 600 Wh의 에너지를 갖는 200 W급 연료전지 시스템의 에너지 밀도는 263 Wh/kg이었다. 기존 배터리 무인기에 비해 약 1.5배 이상의 체공 시간을 달성할 수 있다.

• 한국CDE학회논문집
• /
• 제7권3호
• /
• pp.148-156
• /
• 2002

Most Rapid Prototyping (RP) processes adopt a solid Computer Aided Design (CAD) model, which will be sliced into thin layers of constant thickness in the building direction. Each cross-sectional layer is successively deposited and, simultaneously, bonded onto the previous layer; and eventually the stacked layers from a physical part of the model. A new RP process, the transfer-type Variable Lamination Manufacturing process using expandable polystyrene foam sheet (VLM-ST), has been developed to reduce building time and to improve the surface finish of parts with the thick layers and a sloping surface. This paper describes the generation of Unit Shape Layer (USL), the cutting path data of the linen. hotwire cutter for the VLM-ST process. USL is a three-dimensional layer with a thickness of more than 1 mm and a side slope, and it is the basic unit of cutting and building in the VLM-ST process. USL includes data such as layer thickness, positional coordinates, side angles of each layer, hotwire cutting speed, the heat input to the hotwire, and reference shape. The procedure of generating USL is as follows: (1)Generation of the mid-slice from the CAD model, (2)Conversion of the mid-slice into a simply connected domain, (3)Generation to the reference shape for the mid-slice, (4)Calculation of the rotation angle of the hotwire of the cutting system.