• 한국수소및신에너지학회논문집
• /
• 제21권5호
• /
• pp.383-389
• /
• 2010

Co-B, Co-P-B, Co-Ni-B and Co-Ni-P-B catalysts supported on Ni foam were prepared using electroless plating in the present study. The surface morphology of the catalysts/Ni foam was observed using SEM and EDS analysis. The Co-Ni-P-B/Ni foam catalyst showed the superior performance on hydrogen generation due to the uniform formation of catalyst particles on the Ni foam surface. The characteristics of hydrogen generation with Co-Ni-P-B/Ni foam catalyst was investigated at the variety of $NaBH_4$ and NaOH concentrations. Durability test was performed, resulting in the stable hydrogen generation for 6 hours.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2001년도 추계학술대회 논문집
• /
• pp.297-300
• /
• 2001

Physical modeling technique is applied to investigate foam generation in molten aluminum. By using room temperature water with specially designed equipment, the effects of stirrer type, fluid viscosity(glycerine added to water) and stirring velocity on foam generation behaviors are intensively analysed The distribution and size of bubbles varied with each process parameters but the most important parameters are stirring velocity and fluid viscosity. The results obtained from physical simulation have been confirmed by actual aluminum foam generation experiment at various process variables.

• International Journal of Concrete Structures and Materials
• /
• 제4권1호
• /
• pp.55-62
• /
• 2010

The performance evaluation of a sodium lauryl sulfate to qualify as a foaming agent is presented in this paper. When new surfactants are used a systematic study of production parameters on the foam characteristics needs to be undertaken unlike proprietary foaming agents and foam generator for which manufacturer has predefined the parameters. The relative influence of the foam parameters and optimization of factors were carried out through a systematic experiment design. The foam production parameters namely foam generation pressure and dilution ratio of foaming agents are observed to have significant effect on all foam characteristics with the exception of foam output rate on which only foam generation pressure has influence. The foam with good initial foam density need not necessarily be stable foam. The optimum levels of foam production parameters are determined for the surfactant Sodium lauryl sulfate which can be used to produce stable foam for foam concrete production.

• 한국수산과학회지
• /
• 제37권3호
• /
• pp.179-185
• /
• 2004

The characteristics of foam generation were assessed for freshwater and seawater using a foam generator. Both in freshwater and seawater, the height of the foam layer increased with initial protein concentrations. The height of the foam layer also increased with pore size of the air distributor. The optimum superficial air velocities (SAV) in freshwater and seawater were 0.84 cm/sec and 0.6 cm/sec, respectively. The height of the foam layer was the highest in pH 3 in freshwater and in the region of pH 5-7 in seawater. The height of the foam layer increased with $NaHCO_3$ concentration in freshwater, and $NaHCO_3$ concentration had little effect in seawater. Removal efficiencies of total suspended solid (TSS) and turbidity decreased with an increase of initial protein concentrations in a batch foam separator both in freshwater and seawater.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 춘계학술대회
• /
• pp.1570-1575
• /
• 2004

In order to evaluate the performance of fire-fighting agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams are experimentally investigated. The current research focuses on the destruction of a fire-fighting foam subjected to heat radiation. A simple repeatable test for fire-protection foams subjected to fire radiation is developed. This test involves foam generation equipment, a fire source for heat generation, repeatable test procedures, and data acquisition techniques. Results of the experimental procedure indicated that each thermocouple within the foam responded in a similar manner and gradually to a temperature of $15^{\circ}C{\sim}20^{\circ}C$. At this point, each trace generally rises to a temperature of approximately $90^{\circ}C$. The temperature gradient in the foam as time passes increases with increased foam expansion ratio. In addition, it is determined that the temperature gradient along the foam for depth decreases with increased foam expansion ratio.

• 대한기계학회논문집B
• /
• 제29권1호
• /
• pp.151-158
• /
• 2005

A characteristic of discharge for a foam spray nozzle with various parameters was investigated. The discharge patterns from a fire foam spray nozzle are important to evenly spray over a maximum possible floor area. Two parameters of a foam spray nozzle were chosen, and compared with those from the standard one. Also, in order to evaluate the performance of discharged foam agents used to protect structures from heat and fire damages, the thermal characteristics of fire-protection foams were experimentally investigated. A simple repeatable test for fire-protection foams subjected to fire radiation was developed. This test involves foam generation equipment, a fire source for heat generation, and data acquisition techniques. Results show that the bubble size of foam is increased by large inside diameter of orifice or closed air hole, but phenomenon of discharge angle and expansion ratio is opposite. For the case of the open air hole, liquid film of a circular cone discharges with formation, growth, split and fine grain. In case of the closed air hole, a pillar of foam solution discharges with that. Though the temperature gradient in the foam increases with increased foam expansion ratio. it is not change with increased intensity of heat flux.

• 한국화재소방학회논문지
• /
• 제22권5호
• /
• pp.83-89
• /
• 2008

ISO 7203-2의 고팽창포 표준 발포기를 이용하여 포수용액을 5기압에서 6리터로 방사하면서 풍량, 스크린 매쉬, 포수용액의 농도 및 소금물의 농도 등 외적 요인에 의한 발포 특성을 살펴보았다. 연구결과 풍량이 증가할수록 발포배율이 증가하는 경향을 보였으며 표준발포용 스크린이 평직 철망에 비해 발포배율이 높았다. 포수용액의 농도 증가에 따라 발포 배율과 환원시간이 긴 안정성이 좋은 포를 발생하였으며 소금물의 농도가 증가하는 경우는 발포 배율과 환원시간 모두 감소하는 경향을 나타내었다.

• 한국전산유체공학회지
• /
• 제21권2호
• /
• pp.25-31
• /
• 2016

In this paper, a study on the development of OpenFOAM grid generation program for two-dimensional flow analysis is described. By using the pre-processor(eMEGA) of EDISON_CFD system, grids for OpenFOAM flow calculation were obtained. Resultant two-dimensional grids were used to calculate flow fields by applying simpleFoam, one of the OpenFOAM's popular solvers, and the obtained flow results were compared with theoretical and experimental data available. Also grids generated by present program were compared with grids by a commercial pre-processor Pointwise for the purpose of verification. Verification work includes three cases(single block, O-type single block, and multi block grid), and all results show reasonable matches. According to the current achievement, it can be concluded that OpenFOAM grid can be constructed conveniently by using eMEGA with GUI.

• 한국수산과학회지
• /
• 제36권5호
• /
• pp.509-514
• /
• 2003

We performed the experiment to determine the effective factors, such as the initial concentration of protein, pore size of air distributor, SAV (superficial air velocity), pH, salts and temperature related to foaming characteristics. The foam height in a foam generator was increased with the increase of the initial protein concentration and the decrease of pore size. As SAV was increased, the foam height was increased, and the optimum SAV was 0.84 cm/sec. The foam height was highest in the acid region and it was increased with the increase of salt concentration of NaCl and $NaHCO_3.$ The removal efficiencies of TSS (total suspended solid) and turbidity decreased with the increase of the initial protein concentration in the batch foam separator.

• 한국해안·해양공학회논문집
• /
• 제29권6호
• /
• pp.382-388
• /
• 2017

본 연구에서는 OpenFOAM 기반의 부유식 연직판의 파랑 저감 성능 평가 수치해석 모델링을 수행하였다. Waves2FOAM 라이브러리를 기반으로 내부조파에 의한 파랑 생성 및 스폰지층에 의한 소파 기능을 추가로 적용하였다. 이렇게 추가된 조파 및 소파 기능을 먼저 간단한 2차원 해석으로 검증한 후, Briggs et al.(2001)의 규칙파 실험자료 2가지에 대한 수치모델링을 수행하였다. 모델링 결과는 실험자료와 대체로 잘 일치하였으며, Briggs et al.(2001)에 수록된 WAMIT 수치해석 결과보다 더 좋은 결과를 나타내었다.