• Journal of Aerospace System Engineering
• /
• v.16 no.4
• /
• pp.95-108
• /
• 2022

Airworthiness certification is critical, in ensuring the flight safety of military aircraft for development tests and production operations. The MIL-HDBK-516C, latest airworthiness certification document, handles the field of flying qualities in Chapter 6 (flight technology), and refers to specific chapters of MIL-STD-1797B, which is the specification document for developing military aircraft. Since the MIL-STD-1797B released in 2006 by the U.S. Department of Defense is not disclosed to other countries, the Chapter 6 (flight technology) of MIL-HDBK-516B Expanded, the former certification standards pursuant to flying qualities, has to be applied to military aircraft being developed in the Republic of Korea. However the requirements of Chapter 6 of MIL-HDBK-516B Expanded comprise unclear sentences, because of contents from various development specifications. Also, clarification is needed in that the same requirements have to be verified in different criteria. In this paper, the results of this study present an effective verification method, for acquiring the airworthiness certification in field of flying qualities based on MIL-HDBK-516B Expanded.

• Journal of the Korean Society of Safety
• /
• v.28 no.5
• /
• pp.83-89
• /
• 2013

Occupational Safety and Health Act provides that industrial safety helmets are personal protective equipment(PPE) to protect heads against falls from a height. Relevant domestic regulations are distinguished and different from other countries' cases. This study investigated industrial safety helmet's protective purposes and characteristics related to falls and the notion of fall prevention. A comparative analysis of regulations on safety helmets and fall prevention as well as standards on safety helmet's impact test requirements is followed by a literature review. It is also suggested that the term "fall" related to safety helmets should be changed to "impact on the upper part of head" in domestic regulations and standards.

• Journal of the Korean Society for Railway
• /
• v.12 no.1
• /
• pp.39-44
• /
• 2009

The ballast-flying, induced by strong underbody flow of high-speed train, can damage train underbody, wheel and even cause the safety problems. For this reason, a heighter is being used to prevent ballast-flying through underbody flow reduction. In this research, flow field around a heighter is numerically simulated.. And the parametric study of various heighter geometries is performed to find out more effective heighter shape. Through these numerical studies, the relation between the heighter shape and underbody flow is found out. Also new heighter shapes are numerically investigated and their performances of underbody flow reduction are verified.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.22-27
• /
• 2017

In this paper, A heightened interest in the latest drone, yet steady increase in the field to exploit them. The next market is expected to be vastly improved, and use drone also increasingly will be strengthened. But also not a few side effects of him. In order to use safer and more commonly a drone safety and privacy protection, and there are many issues that need to be considered. Violating privacy laws, such as relations caused by the drone flight and review this study ways to resolve the breach. The flight due to a draw at peace with human life and behavior and enjoy it, but this problem created by new outbreak.

• International Journal of Safety
• /
• v.4 no.2
• /
• pp.43-46
• /
• 2005

The construction workers might be at the risk of many occupational injuries and illnesses. To protect workers from various hazards, industrial health and hygiene systems were specified for the construction workers by law. It is important to know the actual health and safety(H&S) conditions by tasks and the characteristics of injuries and illnesses of construction workers. This study was designed to investigate the actual conditions of construction workers exposed to various harmful substances and work elements including evaluation of health status of each worker and general H&S system. Questionnaire was sent to 600 construction workers nationwide and totally 367 people responded to it having 61.67% of response rate. The common construction hazards were dust(29.6%), noise(19.3%), repetitive motions(12.0%), handling excessive heavy materials(11.2%) in order. The repetitive motions and handling heavy materials related to muscle disorders accounted for 23.2%. The accident and injury types were in order of overexertion, falling, overturning, dropping or flying, electric shock, collision, etc.

• Journal of the Korean Society of Safety
• /
• v.27 no.5
• /
• pp.30-34
• /
• 2012

A safety helmet is a personal protective equipment to protect the head from falling and flying objects. A safety helmet has the maximum delivered impact force as shock absorption performance, the lower delivered impact force the better performance, which was not a controlled variety during manufacturing safety helmet. Accordingly there were some difficulties in establishing the standard for improved performance as there was not a clear controllable impact force for improved performance. In this study the shock absorption performance was intended to be found as coefficient of restitution related to impulse. As a research method, a coefficient of restitution during the absorption of shock was calculated using the impulse transferred to pharynx utilizing the safety helmet shock absorption performance testing device based on the theory of momentum and impulse. The estimated impulsive force curve was derived assuming that shock was not absorbed using the measured data. The sample was selected as tested goods of ABS material for safety certification available mainly in the market. As a result of study, the maximum delivered impact force of safety helmet made by a domestic safety certified a company was 735 N, and its coefficient of restitution proved to be 0.64. The smaller coefficient of restitution is, the lower maximum delivered impact force and the higher shock absorption performance. The coefficient of restitution can be used as a performance index of safety helmet.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.5 no.2
• /
• pp.83-90
• /
• 2010

As a reinforced fabric, asbestos has been utilized as a fire-resistant material as it has a superior flexural stiffness and heat resistance up to $1500^{\circ}C$. However, due to its harmfulness, its use has been prohibited recently and the even the installed asbestos materials are being repaired or supplemented if there is a concern about flying. Asbestos is mainly used for construction panels as a reinforced fabric and coating materials to ensure the fire-resistance of steel frames. Asbestos was used as fire-resistant materials for steel frames until 1991 and then prohibited as Act on Industrial Safety and Health limits the concentration of asbestos in the air. Classified as a designated waste according to Act on Waste Control, asbestos must be buried if there is no possibility of flying (panel-type materials) or cement-solidified and then buried if there is a possibility of flying (spray coating material) In general, it is required that a new waste landfill include a certain landfill facility for designated waste, but in reality there is an absolute storage of landfill facilities for designated waste as they only install facilities of the size required by the regulations. This could result in the 2nd environmental pollution as they cannot process asbestos wastes which will be generated in large volume in the future. This study explores a method that melts asbestos wastes at $700^{\circ}C$ rather than cement-solidifying the waste asbestos from construction sites, especially asbestos-containing spray coating. The study results showed that there was no change in the composition and shape even though asbestos wastes was melted at $1300^{\circ}C$, but there was a change for the specimen which was process in advance for low temperature melting and then melt at $900^{\circ}C$.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.28 no.4
• /
• pp.12-20
• /
• 2020

The purpose of this study was to analyze the face validity of the revised EPTA (English Proficiency Test for Aviation) to see if the tests actually contribute to the enhancement of aviation safety and achieve the purpose of the assessment. In order to reach the above objectives, 103 pilot test takers were surveyed, and nine in-depth interviewees were selected and interviewed. In addition, detailed research results were derived by dividing the participants into the pilot's flight experience (31 captain pilots, 42 first officer pilots, and 30 general commercial pilots). As a result, pilot participants were generally aware that EPTA was more reasonable because the revised EPTA properly implemented the aviation situation and gave participants motivation to learn aviation English. It was also seen that first officer pilots had a higher face validity of EPTA than captain and general commercial pilots. The reason was that first officer pilots considered air traffic control job was more important than other pilots did.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.14 no.3
• /
• pp.78-95
• /
• 2011

This study has developed various DEMs with different spatial resolutions using many different interpolation methods with the aid of a 1:5,000 digital map. In addition, this study has evaluated the vertical accuracy of various DEMs constructed by check point data obtained from the network RTK GPS survey. The obtained results suggest that a DEM developed from the TIN-based Terrain method performs well in evaluating height restriction of buildings in a flying safety area considering general RMSE values, land-type RMSE values and profile evaluation results, etc. And, it has been found that three meters is the right spatial resolution for a DEM in evaluating height restriction of buildings in a flying safety area. Meanwhile, elevation values obtained by the DEM are not point estimation values but interval estimation values. This can be used to check whether the height of buildings in the vicinity of an airfield violates height limitation values of the area. To check whether the height of buildings measured in interval estimation values violates height limitation values of the area, this study has adopted three steps: 1) high probability of violation, 2) low probability of violation, 3) inconclusiveness about the violation. The obtained results will provide an important basis for developing a GIS related to the evaluation of height restriction of buildings in the vicinity of an airfield. Furthermore, although results are limited to the study area, the vertical accuracy values of the DEM constructed from a two-dimensional digital map may provide useful information to researchers who try to use DEMs.

• Korean Journal of Food Science and Technology
• /
• v.46 no.5
• /
• pp.566-574
• /
• 2014

This study was conducted to compare the physicochemical composition and fermentation conditions of sliced, dried radish kimchi with flying fish roe (DFFR). The levels of crude protein, crude lipid, and crude ash in DFFR were higher than those in sliced, dried radish kimchi without flying fish roe (control). DFFR also contained higher levels of Fe and Ca, compared to the control. The inosine monophosphate (IMP) content of DFFR and control was 5.63 and 2.64 mg/100 g, respectively. The polyunsaturated fatty acid and DHA contents in DFFR were approximately 5 and 23 times higher than those in the control, respectively. The major free amino acids contained in these samples were arginine, proline, alanine, leucine, and valine. The number of cells belonging to the Leuconostoc species in DFFR was higher than that in the control. In sensory evaluation studies, DFFR scored the highest in terms of appearance, flavor, taste, and texture.