• 제목/요약/키워드: Flux chamber

검색결과 255건 처리시간 0.024초

DOHC 가솔린기관의 연소실 벽표면순간온도 및 비정상 열유속 측정 및 해석(제3보 : 실린더 라이너에 관한 연구) (Measurement and Analysis of Instantaneous Surface Temperature and Unsteady Heat Flux at Combustion Chamber of DOHC Gasoline Engine ; Cylinder Linder)

  • 위신환;이종태
    • 한국자동차공학회논문집
    • /
    • 제8권3호
    • /
    • pp.1-11
    • /
    • 2000
  • Instantaneous temperature probes were manufactured by pressing method. By using these probes, the instantaneous surface temperature and unsteady heat flux in the cylinder liner of DOHC engine were measured. The main results are as follows; ⅰ) the instantaneous surface temperature of cylinder liner are affected by the contact of piston ring as well as burning gas. ⅱ) the wall temperature of the siamese portion is much higher than other parts. ⅲ) it was shown that the rising trend of heat flux by burning gas are nearly limited to the 1/2-stroke distance from the top of cylinder liner.

  • PDF

Effect of Mixture Ratio Variation near Chamber Wall in Liquid Rocket Engine

  • Han, Poong-Gyoo;Kim, Kyoung-Ho
    • International Journal of Aeronautical and Space Sciences
    • /
    • 제4권2호
    • /
    • pp.51-60
    • /
    • 2003
  • An experimental research program is being undertaken to develop a regeneratively-cooled experimental thrust chamber of liquid rocket engine using liquefied natural gas and liquid oxygen as propellants. Prior to firing test using a regenerative cooling with liquefied natural gas in this program, several firing tests were conducted with water as a coolant. Experimental thrust chambers with a thrust of about 10tf were developed and their firing test facility was built up. Injector used in the thrust chamber was of shear-coaxial type appropriate for propellants of gas and liquid phase and cooling channels are of milled rectangular configuration. Periodical variation of the soot deposition and discoloration was observed through an eyes' inspection on the inner wall of a combustion chamber and a nozzle after each firing test, and an intuitive concept of the periodical variation of mixture ratio near the inner wall of a combustion chamber and a nozzle at once was brought about and analyzed quantitatively. Thermal heat flux to the coolant was calculated and modified with the periodical variation model of mixture ratio, and the increment of coolant temperature at cooling channels was compared with measured one.

Analysis of the experimental cooling performance of a high-power light-emitting diode package with a modified crevice-type vapor chamber heat pipe

  • Kim, Jong-Soo;Bae, Jae-Young;Kim, Eun-Pil
    • Journal of Advanced Marine Engineering and Technology
    • /
    • 제39권8호
    • /
    • pp.801-806
    • /
    • 2015
  • The experimental analysis of a crevice-type vapor chamber heat pipe (CVCHP) is investigated. The heat source of the CVCHP is a high-power light-emitting diode (LED). The CVCHP, which exhibits a bubble pumping effect, is used for heat dissipation in a high-heat-flux system. The working fluid is R-141b, and its charging ratio was set at 60 vol.% of the vapor chamber in a heat pipe. The total thermal conductivity of the falling-liquid-film-type model, which was a modified model, was 24% larger than that of the conventional model in the LED package. Flow visualization results indicated that bubbles grew larger as they combined. These combined bubbles pushed the working fluid to the top, partially wetting the heat-transfer area. The thermal resistance between the vapor chamber and tube in the modified design decreased by approximately 32%. The overall results demonstrated the better heat dissipation upon cooling of the high-power LED package.

액체로켓엔진 연소기 개발에서의 연소불안정 경험 사례 (Experience Cases of Combustion Instability in Development of Thrust Chamber for Liquid Rocket Engine)

  • 김종규;김현준;김성구;최환석
    • 한국추진공학회:학술대회논문집
    • /
    • 한국추진공학회 2017년도 제48회 춘계학술대회논문집
    • /
    • pp.54-58
    • /
    • 2017
  • 연소불안정은 로켓엔진과 가스터빈을 포함하는 연소장치의 개발에 있어서 가장 심각한 문제 중의 하나이다. 특히, 연소실에서의 연소와 음향섭동과의 공진에 의해 야기되는 고주파 연소불안정은 하드웨어에 심각한 손상을 초래한다. 왜냐하면 고주파 연소불안정은 높은 압력섭동과 연소실 벽면으로의 과도한 열유속을 동반하기 때문이다. 따라서 연소불안정은 액체로켓엔진 개발에 있어서 반드시 해결되어야 하는 문제 중의 하나이다. 본 논문에서는 액체추진과학로켓(KSR-III) 및 한국형발사체(KSLV-II) 엔진 연소기 개발에 있어서 연소불안정의 경험 사례를 소개한다.

  • PDF

진동만 미더덕 양식장의 하계 및 동계 탄소 순환 특성 (Characteristics of Carbon Circulation for Ascidian Farm in Jindong Bay in Summer and Winter)

  • 박지혜;조윤식;이원찬;홍석진;김형철;김정배;박정현
    • 한국습지학회지
    • /
    • 제14권2호
    • /
    • pp.211-221
    • /
    • 2012
  • 미더덕은 우리나라에서만 식용 및 양식하는 생물종으로, 2001년 본격적인 수하식 양식이 시작되어 15,084 M/T이 생산되었지만 2011년에는 2,655 M/T으로 생산량이 크게 감소하였다. 생산량 저감의 원인분석을 위해서는 어장 환경에 관한 물질수지 산정이 필요하다고 판단된다. 진동만 미더덕 양식장에서 하계와 동계에 현장 관측 장비인 벤틱챔버(BelcI)를 이용하여 미더덕 양식장과 대조구 정점에 대한 침강 flux와 용출 flux를 산정하였다. 7월 양식장, 2월 양식장, 2월 대조구에서 유기 탄소 침강 flux는 각각 72 mmol C $m^{-2}\;d^{-1}$, 93 mmol C $m^{-2}\;d^{-1}$, 34 mmol C $m^{-2}\;d^{-1}$로 나타났고, 유기탄소 산화율은 각각 13 mmol C $m^{-2}\;d^{-1}$, 81 mmol C $m^{-2}\;d^{-1}$, 31 mmol C $m^{-2}\;d^{-1}$로 나타났다. 영양염 용출 flux는 일반적인 경향을 띄었다. 결과적으로 유기탄소 퇴적 flux는 20:4:1의 비를 나타내었다. 탄소 순환의 물질수지 산정을 통해, 양식 생물의 생산량 저감에 관한 원인 분석연구에 기초 자료로써 활용될 수 있다.

휴대용 기체분석기와 자동 개폐 챔버를 활용한 벼논에서의 메탄 플럭스 관측 (Observation of Methane Flux in Rice Paddies Using a Portable Gas Analyzer and an Automatic Opening/Closing Chamber)

  • 최성원;강민석;김종호;손승원;조성식;박주한
    • 한국농림기상학회지
    • /
    • 제25권4호
    • /
    • pp.436-445
    • /
    • 2023
  • 벼논에서 배출되는 메탄은 주로 폐쇄형 챔버법 또는 에디 공분산법을 이용하여 관측이 이루어진다. 본 연구에서는 기존 측정법들이 갖고 있는 장점은 활용하고 단점은 보완할 수 있는 레이저 기반의 휴대용 기체 분석기(LI-7810)와 자동 개폐식 챔버(Smart Chamber) 를 결합한 새로운 관측 기술을 소개하였다. 벼의 최대 생장 높이에 맞춰 원통 형태의 칼라를 제작하여 측정 보조 도구로 활용하였다. 시범 관측은 경기도 파주시 적성면 객현리 일대의 영농형 태양광 설비가 갖춰진 논에서 2021년 8월부터 2022년 10월까지 이루어졌다. 벼논에서의 메탄 관측을 통해 얻게 되는 가장 일반적인 그래프는 벼의 통기조직을 통한 배출로 인해 메탄의 혼합비가 일정한 기울기로 꾸준히 증가하는 특징이 나타난다. 측정되는 모든 종류의 데이터뿐만 아니라 측정과 동시에 계산되는 메탄 플럭스 값도 실시간 모니터링이 가능하며, 측정이 끝난 후에는 'SoilFluxPro' 라는 소프트웨어를 통해 관련 데이터를 확인할 수 있다. 기존의 챔버법에서는 불가능했던 포집된 온실가스 농도의 연속적인 시계열 변화를 현장에서 바로 확인할 수 있다는 점은 새 관측 기술의 가장 큰 장점이다. 동시에 좁은 지역에 다양한 처리 조건을 가지는 경우에도 적용할 수 있으며, 에디 공분산법보다 사용법이 더 간단하고 설치 및 유지보수에 들어가는 노력이 덜하다는 점에서 매력이 있다. 하지만 관측시스템이 여전히 고가이고 그 운용에 전문적인 지식이 필요하며, 다양 한 관측 구역에 여러 개의 칼라를 설치하고 이동하며 측정하는데 인력이 많이 들어간다는 단점도 존재한다. 새로운 관측 방식이 벼논에서의 메탄 배출 경로를 확인하고 그에 따른 배출량을 정량화하는데 많은 기여를 할 수 있을 것으로 기대된다.

축산분뇨에서 발생하는 암모니아 플럭스에 대한 환경인자의 영향에 관한 연구 (Ammonia Flux from Cow Manure in Relation to the Environmental Factors in Livestock Facilities)

  • 사재환
    • 한국대기환경학회지
    • /
    • 제26권4호
    • /
    • pp.432-442
    • /
    • 2010
  • Ammonia is a very important constituent of the atmospheric environment because it is the most dominant gaseous alkaline species present in the atmosphere. Ammonia is known to affect ecosystems at relatively low concentration. Ammonia flux from livestock facilities can be regulated by a number of environmental factors (pH, ammonium ion, temperature, wind speed, etc). The increases in wind speed above manure from 0.0 m/s to 1.0 7m/s resulted in 2.5 times increases in ammonia flux. Wind speed and ammonia flux showed 0.982. A linear relationship with a correlation coefficient (r=0.982). When manure temperature increased from $3^{\circ}C$ to $36^{\circ}C$, the manure pH decreased approximately 0.30 to 0.46. As wind speed above the manure increased from 0.0 m/s to 1.07 m/s, ammonia flux increased approximately 2.5 times. The increasing manure temperature from $3^{\circ}C$ to $10^{\circ}C$, raised ammonia flux from 2.0 to 3.6 times (2.6 times in average similarly). The increases of manure temperature from $3^{\circ}C$ to $25^{\circ}C$ increased ammonia flux from 5.7 to 12.9 times (8.5 times in average). In this study, the correlation coefficient between ammonia flux and manure temperature was found from 0.972 to 0.989. Results of our research showed that ammonium ion concentration, pH of manure and wind speed were important factors in controlling the ammonia flux from manure livestock facilities.

경작지(耕作地)에서 메탄 및 아산화질소(亞酸化窒素) 배출량(排出量) 측정방법(測定方法) (Methods for Measurement of Methane and Nitrous Oxide Emissions from Agricultural Fields)

  • 신용광;김광식
    • 한국환경농학회지
    • /
    • 제13권3호
    • /
    • pp.359-372
    • /
    • 1994
  • A simplified closed static chamber method was devised for measurement of methane flux from paddy fields. Compared to automatic methane measuring system(AMMS) this chamber method provides availability with moderate costs of setup and maintenance, while it also provides the time-effectiveness compared to other closed top-type chamber method. It accomodates 30 chambers within 2 hours sampling period with two persons. And it provide a rapid and accurate analysis of methane, 30-40 samples per hour. Modified method for $N_2O$ measurements provides a precise and accurate analysis of nitrous oxide without upgrading additional heating zones for gas sampling(switching) valves.

  • PDF

액체로켓엔진 추력실의 재생냉각에 관한 실험적 연구(II) (Experimental Investigation of the LRE Thrust Chamber Regenerative Cooling(II))

  • 김정훈;정해승;박희호;정용갑;김선진
    • 한국추진공학회지
    • /
    • 제8권3호
    • /
    • pp.1-9
    • /
    • 2004
  • 냉각장치가 있는 실험용액체로켓엔진으로 연소실험을 수행하였다. 냉각제의 온도변화를 측정하여 추력실에서 발생하는 열 유속을 계산하였고, 이 결과를 기 개발된 수치해석 방법에 의해 예측한 열유속과 비교하였다. 그 결과 9%이내의 오차를 보이므로 개발된 수치해석 방법은 실제 로켓엔진의 설계 및 제작에 이용 가능하며, 연소압 및 혼합비가 열 유속에 일정한 비례관계를 가지고 영향을 미치고 있음을 고찰하였다.