• 제목/요약/키워드: Flushing time

검색결과 139건 처리시간 0.024초

Mg-Fe 이중층수산화물로 제조한 분말상과 입상 안정화제의 비소 오염토양 안정화 기작 (Stabilization Mechanisms of Powdered and Bead Type Stabilizer Made of Mg-Fe Layered Double Hydroxide (LDH) for the Arsenic Contaminated Soil)

  • 김선희;김경태;오유나;한이경;이민희
    • 한국지하수토양환경학회지:지하수토양환경
    • /
    • 제27권4호
    • /
    • pp.49-62
    • /
    • 2022
  • The magnesium and iron-based layered double hydroxide (Mg-Fe LDH) was synthesized by the co-precipitation process and the bead type LDH (BLDH, 5~6 mm in diameter) was manufactured by using the Mg-Fe LDH and the starch as a binder. To evaluate the feasibility of the BLDH as the As stabilizer in the soil, various experiments were performed and the As stabilization efficiency of the BLDH was compared to that of powdered type LDH (PLDH, <149 ㎛ in diameter). For the As sorption batch experiment, the As sorption efficiency of both of the PLDH and the BLDH showed higher than 99%. For the stabilization experiment with soil, the As extraction reducing efficiency of the PLDH was higher than 87%, and for the BLDH, it was higher than 80%, suggesting that the BLDH has similar the feasibility of As stabilization for the contaminated soil, compared to the PLDH. From the continuous column experiments, when more than 7% BLDH was added into the soil, the As stabilization efficiency of the column maintained at over 91% for 7 pore volume flushing (simulating about 21 months of rainfall) and slowly decreased down to 64% after that time (to 36 months) under the non-equilibrium conditions. Results suggested that more than 7% of BLDH added in As-contaminated soil could be enough to stabilize As in soil for a long time. The main As fixation mechanisms on the LDH were also identified through the X-ray fluorescence (XRF), the X-ray diffraction (XRD), and the Fourier transform infrared (FT-IR) analyses. Results showed that the LDH has enough of an external surface adsorption capacity and an anion exchange capability at the interlayer spaces. Results of SEM/EDS and BET analyses also supported that the Mg-Fe LDH used in this study has sufficient porous structures and outer surfaces to fix the As. The reduction of carbonate (CO32-) and sulfate (SO42-) anions in the LDH after the reaction between As and the LDH was observed through the FT-IR, the XRF, and the XRD analyses, suggesting that the exchange of some of these anions with the arsenate (H2AsO4- or HAsO42-) occurs at the LDH interlayers during the stabilization process in soil.

세계문화유산 하회와 양동의 식생경관 진정성 유지를 위한 평가항목 설정 기초 연구 (A Basic Study on the Establishment of Evaluation Items for the Resiliency of Planting Landscape in Hahoe and Yangdong of World Cultural Heritage)

  • 이창훈;신현실
    • 한국전통조경학회지
    • /
    • 제36권2호
    • /
    • pp.21-29
    • /
    • 2018
  • 본 연구는 하회와 양동마을 내 식생경관의 진정성 유지를 위한 가치평가 항목을 선정하는 것을 목적으로 하였다. 먼저, FGI를 실시하여 선정된 43개의 항목에 대해 적합성 검증을 하였으며, AHP 전문가 설문을 통해 가중치를 산정하여 평가항목 개발을 위한 지표의 중요도를 설정하였다. 전문가 분석결과 대분류 2개 항목, 중분류 6개 항목, 세부 분류 11개 주요 항목을 도출하였으며, 연구의 결과를 요약하면 다음과 같다. 첫째, 하회와 양동의 식생경관 진정성 유지를 위한 평가항목 선정과 상대적 중요도를 분석한 결과 문화적 가치가 생물학적 가치에 비해 상대적으로 높은 것으로 평가되었다. 특히 수목의 생물학적 가치 중에서 수종의 특수성과 수목의 형태 항목을 제외한 세부항목은 상대적으로 낮은 값이 도출되었다. 둘째, FGI에서 우선 선정된 43개 항목에 대한 적합성 검증 결과 근원직경, 수관폭, 수령, 수세, 수형, 특수성, 민속성, 기록성, 기념성, 시간성, 기관관리 여부 총 11개의 세부항목이 선정되었다. 셋째, AHP분석기법을 통한 산정된 식생경관 평가항목의 가중치는 생물학적 가치의 특수성(0.187), 수형(0.094), 수관폭(0.076), 근원직경(0.073), 수세(0.071), 수령(0.052)의 순서로 평가되었다. 가장 높은 가중치를 보인 특수성과 가장 적은 값이 도출된 '수령' 항목을 제외한 '수관폭', '근원직경', '수세' 항목에서는 상대적으로 큰 차이가 없었다. 넷째, 역사적 가치에 목표한 가치 속성의 중요도 평가 결과는 기관관리 여부(0.134), 기록성(0.092), 시간성(0.088), 기념성(0.063), 민속성(0.050)의 순서로 나타났다. 하회와 양동을 구성하는 식생경관의 역사적 가치 중요도 평가항목은 지정관리 여부에 대한 선행작업이 문화와 역사를 포함하는 식생경관의 유지에 중요한 것으로 평가되었으며, 식생경관 유지에 있어서 수목이 갖는 민속성은 상대적으로 낮은 가중치로 평가되었다. 본 연구의 AHP기법을 통하여 산정된 세계문화유산 하회와 양동마을의 식생경관 가치평가 항목과 가중치 값은 마을 내 수목에 대한 실질적인 진정성 평가에 적용할 수 있을 것으로 판단된다. 이에 도출된 하회와 양동마을 식생경관 가치평가 항목과 가중치 값을 적용한 평가기준 마련을 위한 후속 연구는 추후 과제로 남기고자 한다.

유수단면 흐름장에서 Shear 효과를 갖는 Stokes Drift의 계산법 (New Method of Computing the Stokes Drift Including Shear Effect in the Cross-Sectional Flow Field)

  • 김종화;박병수
    • 수산해양기술연구
    • /
    • 제33권1호
    • /
    • pp.9-26
    • /
    • 1997
  • Stokes drift(SD) and Lagrangian discharge(LD) are important factors for analysis of flushing time, tidal exchange, solute transport and pollutant dispersion. The factors should be calculated using the approached method to flow phenomena. The aim of this paper re-examines the previous procedures for computing the SD and LD, and is to propose the new method approached to stratified flow field in the cross-section of coastal region, e.g. Masan Bay. The intensity of velocity near the bottom boundary layer(BBL) depends on the sea-bed irregularity in the coastal estuaries. So we calculated the depth mean velocity(DMV) considering that of BBL omitted in Kjerfve's calculation method. It revealed that BBL effect resulting in application of the bay acts largely on DMV in half more among 1l stations. The new expression of SD and LD per unit width in the cross-section using the developed DMV and proposed decomposition procedure of current were derived as follow : $$Q=u_0+\frac{1}{2}H_1{U_1cos(\varphi_h-\varphi_u)+U_3cos(\varphi_h-\varphi{ud})} LD ED SD$(Q_{skim}+Q_{sk2}) The third term, $Q_{sk2}$, on the right-hand of the equation is showed newly and arise from vertical oscillatory shear. According to the results applied in 3 cross-sections including 11 stations of the bay, the volume difference between proposed and previous SD was founded to be almost 2 times more at some stations. But their mean transport volumes over all stations are 18% less than the previous SD. Among two terms of SD, the flux of second term, $Q_{skim}$, is larger than third term, $Q_{sk2}$, in the main channel of cross-section, so that $Q_{skim}$ has a strong dependence on the tidal pumping, whereas third term is larger than second in the marginal channel. It means that $Q_{sk2}$ has trapping or shear effect more than tidal pumping phenomena. Maximum range of the fluctuation in LD is 40% as compared with the previous equations, but mean range of it is showed 11% at all stations, namely, small change. It mean that two components of SD interact as compensating flow. Therefore, the computation of SD and LD depend on decomposition procedure of velocity component in obtaining the volume transport of temporal and spacial flow through channels. The calculation of SD and LD proposed here can separate the shear effect from the previous SD component, so can be applied to non-uniform flow condition of cross-section, namely, baroclinic flow field.

  • PDF

음허증 측정도구의 개발 및 신뢰도 타당도 검정 (Development of Yin-Deficiency Questionnaire and Examine the Reliability and Validity)

  • 이상재;박종배;이송실;김광호
    • 동의생리병리학회지
    • /
    • 제18권2호
    • /
    • pp.376-380
    • /
    • 2004
  • The purpose of this study is the develop a questionnaire for measuring Yin-Deficiency and examine the reliability and validity for its' value as a barometer for evaluating Yin-Deficiency. Questionnaire was developed according to the symptoms of Yin-Deficiency suggested in the 'Standardization of diagnostic terms and requirements of Korean Medicine', With and as a reference, each symptom has been worked on to be put on the questionnaire. Visual analogue scales(VAS) was used as a barometer for measuring frequency of manifestation of symptoms. A study was performed to measure validity and reliability of the final questionnaire for analysis. reliability of YinDQ was measured by Cronbach's alpha coefficient and test-retest method. This study utilized factor analysis and clinical validity for evaluation of validity. For the purpose of decreasing the amount of data-the number of factors, and at the same time minimize the loss of information factor analysis was performed Component factors were extracted using Principal Component Analysis. This study evaluated the clinical validity for examination of difference between the normal group and the patient group. Evaluation on the's internal consistency showed strong internal consistency with value of 0.8615. reliability from test-rest with three-week interval, followed by comparisons of the correlation coefficient and mean values of each item between the two. The Spearman correlation coefficient was 0.54-0.79. By factor analyse two factors with Eigen value of greater than 2.2 were selected. Factor 1 consists of items of 'irritable fever on the five Hearts', 'flushing of the zygomatic region in the afternoon', 'tidal fever', 'night sweats', and 'dryness on the mouth or the throat'. Factor two consists of items of 'emaciation', 'dizziness', 'insomnia', 'decreased amount of urine with yellowish color', and 'constipation'. The comparison between the patient group and the normal group showed significant differences for every ten questions. The results implies that YinDQ is a barometer with sufficient reliability and validity. The questionnaire for Yin-Deficiency may not be enough to replace the specific differential diagnosis by a doctor of Oriental medicine. Nevertheless, it can be effectively utilized as an assisting method in consultation or a method of measuring the degree of Yin-Deficiency in a group.

계면활성제용액-경유 간 계면장력과 용해도 상관관계 연구 (Relationship between Interfacial Tension and Solubility of Diesel Fuel in Surfactant Solutions)

  • 정승우;허정현
    • 대한환경공학회지
    • /
    • 제35권1호
    • /
    • pp.70-73
    • /
    • 2013
  • 토양정화를 위한 토양 세정 및 세척 공정에서 계면활성제 선택 기준과 가장 중요한 설계인자는 오염물질의 용해도이다. 계면활성제의 오염물질 용해도는 오염물질과 평형상태를 만든 후 Dichrolomethane을 이용한 추출, 증발, 농축 등의 전처리과정을 거쳐야 한다. 따라서 계면활성제 용액 내 유류 오염 물질의 용해도 분석은 많은 시간과 재료를 필요로 한다. 계면장력은 계면활성제용액과 유류오염물질 사이에 유지되는 힘을 지칭하는 것으로 용해도와 밀접한 관계를 가진다. 본 연구는 계면활성제용액과 경유 간 계면장력과 용해도를 측정하여 계면장력과 용해도간 상관관계를 정립하므로 신속한 계면 장력 측정을 통한 용해도를 가늠할 수 있는 방안을 제시하였다. 계면장력과 유류용해도간 상관관계를 평가한 결과 두 특성은 기하급수적인 반비례관계를 보였다. 즉, 계면장력이 5 dyne/cm 이상조건에서 경유의 용해도는 크게 차이를 보이지 않다가 1 dyne/cm 이하에서 경유의 용해도는 급격하게 증가하였다. 앞으로 계면활성제용액 간 계면장력을 우선적으로 측정해 본다면 토양정화에 적합한 계면활성제 종류 및 농도를 매우 신속하고 효율적으로 선택할 수 있을 것으로 판단된다.

가교키토산 복합막을 이용한 에틸렌글리콜/물 혼합액의 투과증발분리

  • 남상용;이영무
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1996년도 추계 총회 및 학술발표회
    • /
    • pp.82-83
    • /
    • 1996
  • 키토산 막을 이용한 유기혼합물 중의 물을 효율적으로 분리해내는 투과증발공정은 많은 발전을 거듭해 왔으며, 특히 에탄올중의 물을 효율적으로 탈수하는 것에는 탁월한 성능을 보고한 바 있다. 키토산은 주로 게등의 갑각류의 외피에서 얻을 수 있는 키닌을 주원료로 하는 물질로서 친수성이 뛰어난 막재료뿐만 아니라 생체적 합성이 요구되는 생체재료로도 널리 사용이 되고 있는 물질이다. 에틸렌즐리콜은 석유화학공정에서 생성되는 에틸렌 옥시이드를 원료로 하여 제조가 되고 있는 물질이다. 에틸렌글리콜은 PET의 원료로서 사용이 많이 되고 있으며, 겨울철에는 자동차등의 부동액이나 눈이 많이 내리는 지역에서 효율적으로 눈을 제거하기 위하여 공항의 활주로등에서 주로 사용이 되고 있는 물질이다. 에틸렌글리콜의 제조공정중에서 물을 효과적으로 제거하는 방법으로는 증류법이 있을 수 있으나 에틸렌글리콜의 비점이 물보다 현저히 높기 때문에, 공비혼합물을 생성하지 않는 이 혼합물의 특성과는 무관하게, 투과증발법을 이용할 경우 에너지의 절감이 이루어지게 되기 때문에 매우 효용적이고 추천할만할 공정이다. 또한 활주로의 부동액등으로 사용되는 경우 에틸렌글리콜의 재활용이 이루어질 경우 경비의 절감이나 환경적인 문제의 해결등의 장점이 있어서 물의 분리가 요구되고 있다. 이 경우에는 마찬가지로 에틸렌글리콜과 물의 분리는 일반적인 분리에 비해서 투과증발법이 유용하다고 할 수 있다. 본 실험에서는 키토산 막의 효율적인 응용예로서 기존의 알콜의 탈수와 더불어서 에틸렌글리콜의 탈수를 고찰해보고자 하였다.관리가 간편하며, 용존산소량을 줄일수 있다는 점에서 장점이 있으나, 전 ultra pure water의 system이 열적으로 안정해야 하고 경제적인 문제가 수반하는 단점을 가지고 있다. 후자의 경우, 미량의 과산화수소수 (1~10,000 ppm)를 이용해 처리 해주는 방법의 경우 경제적으로 큰 장점이 있고, 처리가 단순하다는 장점이 있으나 과산화수소수 자체에 포함하고 있는 높은 impurit level, 그리고 처리후 장시간의 flushing time을 가져야 한다는 단점등이 존재 하고 있다.요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았

  • PDF

인공습지의 성능향상을 위한 다기능 설계기법 개발 (Development of a Multifunctional Design Concept to Improve Constructed Wetland Performance)

  • ;최혜선;김이형
    • 한국습지학회지
    • /
    • 제22권2호
    • /
    • pp.161-170
    • /
    • 2020
  • 농업비점오염에 의한 수질문제 해결을 위하여 인공습지 조성이 늘어나고 있으나 긴 체류시간과 긴 일조량 등으로 인하여 습지 내 조류 발생 등의 문제가 지속적으로 발생하고 있다. 본 연구는 농업 비점오염원관리를 위하여 조성된 인공습지의 효율을 평가하여 자연기반 능력이 향상된 고도화된 인공습지 개선방안을 제시하고자 수행되었다. 인공습지의 성능평가는 구성성분(물, 퇴적물 및 식물)의 모니터링을 통해 구성성분이 시스템의 처리 성능에 주는 기여도 평가를 통해 수행되었다. 건기시에는 식물성 플랑크톤의 과다성장, 긴 체류시간 및 일조량 과다로 습지내 탁도 및 미립자 농도가 각각 80~197 % 및 10~87 %정도 증가하는 것으로 나타났다. 그러나 강우시에는 습지내 적절한 물 순환과 지속적인 물 흐름으로 미립자, 유기물 및 영양분의 농도가 43 ~ 70 %, 22 ~ 49 %, 15 ~ 69 % 정도 감소하는 것으로 나타났다. 이러한 연구결과로 볼 때 인공습지가 가진 문제해결을 위해서는 자연습지가 가진 안정적 물 흐름이 필요하다는 것을 알수 있다. 그러나 일정수심을 유지하도록 되어있는 인공습지 설계기준은 건기와 강우기가 뚜렷하게 나타나는 한국적 기후상황에 타당하지 않다. 따라서 본 연구에서는 인공습지가 가진 문제를 해결하고 홍수관리, 수질 관리 및 환경 기능을 지속적으로 유지할 수 있도록 다기능 설계기법을 개념화하였다.

Prevention of P-i Interface Contamination Using In-situ Plasma Process in Single-chamber VHF-PECVD Process for a-Si:H Solar Cells

  • Han, Seung-Hee;Jeon, Jun-Hong;Choi, Jin-Young;Park, Won-Woong
    • 한국진공학회:학술대회논문집
    • /
    • 한국진공학회 2011년도 제40회 동계학술대회 초록집
    • /
    • pp.204-205
    • /
    • 2011
  • In thin film silicon solar cells, p-i-n structure is adopted instead of p/n junction structure as in wafer-based Si solar cells. PECVD is a most widely used thin film deposition process for a-Si:H or ${\mu}c$-Si:H solar cells. For best performance of thin film silicon solar cell, the dopant profiles at p/i and i/n interfaces need to be as sharp as possible. The sharpness of dopant profiles can easily achieved when using multi-chamber PECVD equipment, in which each layer is deposited in separate chamber. However, in a single-chamber PECVD system, doped and intrinsic layers are deposited in one plasma chamber, which inevitably impedes sharp dopant profiles at the interfaces due to the contamination from previous deposition process. The cross-contamination between layers is a serious drawback of a single-chamber PECVD system in spite of the advantage of lower initial investment cost for the equipment. In order to resolve the cross-contamination problem in single-chamber PECVD systems, flushing method of the chamber with NH3 gas or water vapor after doped layer deposition process has been used. In this study, a new plasma process to solve the cross-contamination problem in a single-chamber PECVD system was suggested. A single-chamber VHF-PECVD system was used for superstrate type p-i-n a-Si:H solar cell manufacturing on Asahi-type U FTO glass. A 80 MHz and 20 watts of pulsed RF power was applied to the parallel plate RF cathode at the frequency of 10 kHz and 80% duty ratio. A mixture gas of Ar, H2 and SiH4 was used for i-layer deposition and the deposition pressure was 0.4 Torr. For p and n layer deposition, B2H6 and PH3 was used as doping gas, respectively. The deposition temperature was $250^{\circ}C$ and the total p-i-n layer thickness was about $3500{\AA}$. In order to remove the deposited B inside of the vacuum chamber during p-layer deposition, a high pulsed RF power of about 80 W was applied right after p-layer deposition without SiH4 gas, which is followed by i-layer and n-layer deposition. Finally, Ag was deposited as top electrode. The best initial solar cell efficiency of 9.5 % for test cell area of 0.2 $cm^2$ could be achieved by applying the in-situ plasma cleaning method. The dependence on RF power and treatment time was investigated along with the SIMS analysis of the p-i interface for boron profiles.

  • PDF

Vacuum electrodeposition에 의한 팔라듐 합금 금속막 제조 및 수소 분리에 관한 연구 (Fabrication of a palladium alloy composite membrane by vacuum electrodeposition)

  • 남승은;이규호
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 1998년도 추계 총회 및 학술발표회
    • /
    • pp.96-98
    • /
    • 1998
  • 1. 서론 : 팔라듐이나 이의 합금막들은 높은 선택적 투과특성으로 인해 수소 정제나 분리막 반응기와 같은 산업응용 분야에서 매우 높은 관심을 갖고 있다. 상업적으로 이용되고 있는 이러한 막들은 통상적인 metallugical process에 의해 제조괸 self-supported type으로 수소 투과 속도가 낮을 뿐만 아니라 팔라듐 등은 고가의 귀금속이므로 비경제적이다. 따라서 현재 대부분의 연구자들은 기계적 강도를 유지하기 의한 다공성 지지체 위에 얇은 금속 박막을 코팅함으로서 투과성을 높이는 동시에 경제적인 복합막 형태의 막을 만드는데 연구의 촛점을 맞추고 있다. 이러한 형태의 막을 제조하기 위한 금속 박막 제조법은 무전해 도금법(electroless deposition), 화학증착법(CVD), 스퍼터링(sputtering), 전해도금법(electrodeposition) 등이 시도되었다. 그러나 수소에 대한 우수한 선택적 투과 특성을 갖기 의해서는 대부분 5$\mu$m 이상의 두꺼운 막을 제조하였으며 이보다 얇은 막의 제조에 한계가 있기 때문에 이들 막에 대한 기체 투과 특성에 대한 연구결과는 많지 않다. 본 연구에서는 기존의 전기도금법을 응용한 소위 'vacuum electrodeposition' 이란 새로운 기술을 도입함으로써 우수한 선택적 투과성을 갖는 2$\mu$m 이하의 팔라듐 합금 박막 제조를 가능하게 하였다. 지지체 표면의 거칠음 정도, 평균 기공 크기 등의 지지체 성질의 조절에 의한 금속 박막의 핀홀을 최소화함으로써 질소와 같은 inert gas의 투과도는 거의 없게 유지하는 동시에 금속 박막 두께, 결정 구조(e.g. grain size), 합금 조성 등을 조절함으로써 수소의 투과도를 높이고자 하였다. 있다. 후자의 경우, 미량의 과산화수소수 (1~10,000 ppm)를 이용해 처리 해주는 방법의 경우 경제적으로 큰 장점이 있고, 처리가 단순하다는 장점이 있으나 과산화수소수 자체에 포함하고 있는 높은 impurit level, 그리고 처리후 장시간의 flushing time을 가져야 한다는 단점등이 존재 하고 있다.요구된다. 몰입이 가능하여 임계치가 저하된 것으로 여겨진다. 또한 광학적 이득의 존재는 이 구조에 의한 극단파장 반도체 레이저다이오드의 실현 가능성을 나타내는 것이다.548 mL에 비해 통계학적으로 의의 있게 적었다(p<0.05). 결론: 관상동맥우회로 조성수술에서 전방온혈심정지액을 사용할 때 희석되지 많은 고농도 포타슘은 fliud overload와 수혈을 피하고 delivery kit를 사용하지 않음으로써 효과적이고 만족할 만한 심근보호 효과를 보였다.를 보였다.4주까지에서는 비교적 폐포는 정상적 구조를 유지하면서 부분적으로 소폐동맥 중막의 비후와 간질에 호산구 침윤의 소견이 특징적으로 관찰되었다. 결론: 분리 폐 관류는 정맥주입 방법에 비해 고농도의 cisplatin 투여로 인한 다른 장기에서의 농도 증가 없이 폐 조직에 약 50배 정도의 고농도 cisplatin을 투여할 수 있었으며, 또한 분리 폐 관류 시 cisplatin에 의한 직접적 폐 독성은 발견되지 않았다이 낮았으나 통계학적 의의는 없었다[10.0%(4/40) : 8.2%(20/244), p>0.05]. 결론: 비디오흉강경술에서 재발을 낮추기 위해 수술시 폐야 전체를 관찰하여 존재하는 폐기포를 놓치지 않는 것이 중요하며, 폐기포를 확인하지 못한 경우와 이차성 자연기흉에 대해서는 흉막유착술에 더 세심한 주의가 필요하다는 것을 확인하였다. 비디오흉강경수술

  • PDF

식염수-Sephadex가 $^{99m}TC$-Sephadex의 폐분포에 미치는 영향 (Effect of Saline-Sephadex on the Organ Distribution of $^{99m}TC$-Sephadex)

  • 성호경;강신구;고주환;문광남;이장규
    • 대한핵의학회지
    • /
    • 제5권2호
    • /
    • pp.57-64
    • /
    • 1971
  • The organ distribution study and the whole body scan were done in the albino rats at intervals of 5, 30, 60, 90 and 120 minutes after the intravenous injection of $^{99m}TC$-pertechnetate absorbed in Sephadex beads of $20{\sim}80$ micra in diameter. Effect of additional injection of physiological saline and saline absorbed in Sephadex beads of $20{\sim}80$ micra in diameter on the scan and organ distribution were also studied. The results were as follows. 1. Five minutes after the injection of $^{99m}TC$-pertechnetate absorbed in Sephadex beads of $20{\sim}80$ micra in diameter, Sephadex was well trapped in the lungs, with which the excellent lung scan was obtained. Two hours after the injection, kidneys were well visualized instead of lungs, which suggested that kidney acts as the excretory organ. Five minutes prior to scan, additional injection of physiological saline absorbed in Sephadex above mentioned was done. The bladder was also well visualized together with the kidneys. 2. In the distribution studies, most of radioactivity was detected in the lungs at 5 minutes and was gradually transferred chiefly to the kidneys and bladder and partly to the liver. 3. Additional injection of physiological saline resulted in a rapid transfer of $^{99m}TC$ trapped in the lung to both the kidneys and liver. 4. Additional injection of physiological saline absorbed in Sephadex beads of $20{\sim}80$ micra in diameter resulted in a rapid transfer of $^{99m}TC$ trapped in the lung to only the urinary system. 5. Results of these studies suggested that; a) Other nutrients and therapeutic compounds may be carried into the lungs along with Sephadex beads and then released in high concentration, which would exert greater therapeutic effect locally than that of the usual administration. b) Some radionuclides absorbed in Sephadex could be used as the lung scan agents, the flushing out of which by Sephadex-saline also give satisfactory renal and bladder scans. c) Other potent therapeutic radionuclides could be retained for some time by this method, which can be in the lungs easily flushed out within 2 hours.

  • PDF