• Journal of the korean academy of Pediatric Dentistry
• /
• v.36 no.2
• /
• pp.227-236
• /
• 2009

The purpose of this study is to examine the acidity of beverages that are sold for children in the market and to estimate by experiment the degree of the enamel erosion of deciduous teeth that is attributed to the beverages. The pH value of children beverages among top sale list in Seoul and Gyeonggi province were measured. And 7 beverages with the pH value of 3.5 or lower were selected. The enamel erosion of deciduous teeth by the children beverages for 1, 5, 10, and 30 minutes respectively was examined. The results were as follows: 1. The acidity of most of the children beverages examined in this study was the pH level of 5.5 or lower that can cause the tooth erosion. 2. The microhardness value of the enamel of deciduous teeth was lower as exposing it to children beverages. The reduction of surface microhardness value was significant from 1 minute after the exposure, and the reduction was continuously observed until 30 minutes has passed. 3. The higher the acidity of beverages, the larger the reduction in microhardness value caused after the exposure of 30 minutes to the beverages. There was no significant relation between the acidity of beverages and the reduction rate of surface microhardness value. The other factors such as calcium, phosphorus, and fluorine or buffering of the beverages may affect the enamel erosion.

• Journal of Electrochemical Science and Technology
• /
• v.10 no.4
• /
• pp.424-432
• /
• 2019

Planar BiVO₄ and 3 wt% Mo-doped BiVO₄ (abbreviated as Mo:BiVO₄) film were prepared by the facile spin-coating method on fluorine doped SnO₂(FTO) substrate in the same precursor solution including the Mo precursor in Mo:BiVO₄ film. After annealing at a high temperature of 450℃ for 30 min to improve crystallinity, the films exhibited the monoclinic crystalline phase and nanoporous architecture. Both films showed no remarkably discrepancy in crystalline or morphological properties. To investigate the effect of surface passivation exploring the Al₂O₃ layer, the ultra-thin Al₂O₃ layer with a thickness of approximately 2 nm was deposited on BiVO₄ film using the atomic layer deposition (ALD) method. No distinct morphological modification was observed for all prepared BiVO₄ and Mo:BiVO₄ films. Only slightly reduced nanopores were observed. Although both samples showed some reduction of light absorption in the visible wavelength after coating of Al₂O₃ layer, the Al₂O₃ coated BiVO₄ (Al₂O₃/BiVO₄) film exhibited enhanced photoelectrochemical performance in 0.5 M Na₂SO₄ solution (pH 6.5), having higher photocurrent density (0.91 mA/㎠ at 1.23 V vs. reversible hydrogen electrode (RHE), briefly abbreviated as V_RHE) than BiVO₄ film (0.12 mA/㎠ at 1.23 V_RHE). Moreover, Al₂O₃ coating on the Mo:BiVO₄ film exhibited more enhanced photocurrent density (1.5 mA/㎠ at 1.23 V_RHE) than the Mo:BiVO₄ film (0.86 mA/㎠ at 1.23 V_RHE). To examine the reasons, capacitance measurement and Mott-Schottky analysis were conducted, revealing that the significant degradation of capacitance value was observed in both BiVO₄ film and Al₂O₃/Mo:BiVO₄ film, probably due to degraded capacitance by surface passivation. Furthermore, the flat-band potential (V_FB) was negatively shifted to about 200 mV while the electronic conductivities were enhanced by Al₂O₃ coating in both samples, contributing to the advancement of PEC performance by ultra-thin Al₂O₃ layer.

• Applied Chemistry for Engineering
• /
• v.26 no.2
• /
• pp.154-158
• /
• 2015

In this study, the catalytic activity of ${\gamma}-Al_2O_3$ was investigated for the decomposition of $NF_3$. Reactions for $NF_3$ decomposition were carried out in the range of reaction temperature of $330{\sim}730^{\circ}C$ and GHSV of $3,000{\sim}15,000mL/g-cat{\cdot}h$ in a fixed-bed catalytic reactor system. Thermal decomposition of $NF_3$ was also performed in order to compare with the catalytic decomposition of $NF_3$. The conversion of $NF_3$ by the catalytic decomposition at $400^{\circ}C$ was four times higher than that of the thermal decomposition. It was confirmed that the reaction behavior of $NF_3$ over ${\gamma}-Al_2O_3$ exhibited two reaction pathways in the presence of steam. Fluorine in $NF_3$ over ${\gamma}-Al_2O_3$ was chemically absorbed to $AlF_3$ by the gas-solid reaction in the absence of steam. The catalytic decomposition of $NF_3$ occurred by hydrolysis with steam. It was also confirmed by FT-IR analysis that $NF_3$ was completely decomposed to NOx and HF above $500^{\circ}C$.

• Applied Chemistry for Engineering
• /
• v.26 no.5
• /
• pp.604-608
• /
• 2015

In the present work, the improvement of nitrate removal ability was investigated to resolve a eutrophication problem by using Ulmus davidiana (U. davidiana) bark generated from Gangwon province. When the initial pH of aqueous solution was adjusted to 3.5 in batch experiments, the removal efficiencies for 10 and 20 mg/L nitrate increased up to 43 and 37%, respectively. In addition, when U. davidiana bark of 1.0 g/100 mL was used for 8 h, the removal efficiency for 20 mg/L nitrate was 68%. Moreover, when reforming reaction of U. davidiana bark was performed under oxyfluorination conditions, the optimal ratio of partial pressure between fluorine and oxygen was 1 : 9 for an enhanced nitrate adsorption amount. When reformed U. davidiana bark was used for 8 h operation under the optimal oxyfluorination condition, removal efficiencies for 10, 20 and 40 mg/L nitrate were found to be 96, 95 and 59%, respectively. Collectively, these results suggest that our water treatment technology can be effectively utilized to treat high concentrations of nitrate in water bodies.

• The Journal of Korean Society for School & Community Health Education
• /
• v.8 no.2
• /
• pp.49-59
• /
• 2007

Objectives: This study was designed to understand the oral health fact of high school students, search for an education method and learning goal appropriate for the subjects, and utilize them as basic data to think of effective solutions for oral health care. Methods: The samples to achieve the purpose of this research are composed of 386 students in J industrial high school, OO city, Kyounggido, the number of male students 286, and female students 100. Data were statistically analyzed by frequency analysis, cross tabulation by using SPSS WIN Ver. 12.0. Results: First, The answers in terms of oral symptoms were in the order of 31.8% for gum hurt and bleeding, 31.4% for pain in teeth by drinking or eating hot and cold drinks or food, 27.1% for broken or cracked teeth, 25.7% for aching and throbbing teeth, 20.6% for unpleasant mouth smell, and 5.7% for pain of tongue and soft oral tissues. Second, In terms of behavior for oral health, 88.4% answered that they consume cariogenic snacks, while 29.2% of them, 2.5% of male and 6.3% of female enjoy consuming them but hardly brush their teeth after consumption. Third, In terms of timing for brushing teeth, the results show that 50.0% do so before breakfast, 47.9% after breakfast, 15.2% after lunch, 36.9% after dinner, 65.5% before going to sleep, and 3.5% after consuming snacks, whereas 64.2% answered that they are not aware of fluorine mouthwash. Fourth, In terms of oral health condition. proportion of children with one or more caries in permanent teeth was 71.0%, while 51.4% have $2{\sim}3$ cariogenic teeth, and 16.8% have more than 4 cariogenic teeth. Considering sex, female students have somewhat higher ratio showing 68.5% for male and 78.0% for female, but the ratio was 53.1% for male and 46.7% for female in case of $2{\sim}3$ cariogenic teeth, and 17.5% for male and 15.8% for female in case of more than 4 cariogenic teeth. 9.3% of students turned out to have decayed teeth. Fifth, In terms of oral hygiene condition, only 7.9% of them had excellent condition, and 38.4% need to improve. More specifically, 41.1% of male students and 30.6% of female students need to improve their oral hygiene condition. Conclusions: The study results suggest that School Dental health programs increase and need to be community-incorporated and comprehensive from elementary to high school.

• The Korean Journal of Nuclear Medicine
• /
• v.37 no.5
• /
• pp.331-335
• /
• 2003

Purpose: Accurate assessment of the lesion after treatment of patients with bone lymphoma is difficult. In this patient who demonstrated complete remission after chemotherapy, the regions of fluorine-18 fluorodeoxyglucose $(^{18}FFDG)PET$ uptake diminished more rapidly fellowing therapy, indicating a complete response at much earlier stage than did Magnetic Resonance Imaging (MRI) or CT based findings. With the conventional methods, such as MRI and CT, It was difficult to assess whether the residual tumor tissue was viable or not. Decision to complete response is very important in patients with lymphoma to plan the further treatment. We experienced a patient with primary lymphoma of bone who revealed complete response to chemotherapy on $^{18}FFDGPET$ while CT showed persistent destructive bone lesion. Thus, $^{18}FFDGPET$ study after therapy may be superior to CT in the evaluation of response to treatment in primary lymphoma of bone.

• Journal of the Korean Vacuum Society
• /
• v.7 no.3
• /
• pp.267-267
• /
• 1998

The fluorine doped silicon oxide (SiOF) intermetal dielectric (IMD) films have been of interest due to their lower dielectric constant and compatibility with existing process tools. However instability issues related to bond and increasing dielectric constant to water absorption when the SiOF films was exposured to atmospheric ambient. Therefore, the purpose of this research is to study the effect of post oxygen plasma treatment on the resistance of moisture absorption and reliability of SiOF film. Improvement of moisture absorption resistance of SiOF film is due to the forming of thin SiO₂layer at the SiOF film surface. It is thought that the main effect of the improvement of moisture absorption resistance was densification of the top layer and reduction in the number of Si-F bonds that tend to associate with OH bonds. However, the dielectric constant was increased when plasma treatment time is above 5 min. In this study, therefore, it is thought that the proper plasma treatment time is 3 min when plasma treatment condition is 700 W of microwave power, 3 mTorr of process pressure and 300℃ of substrate temperature.

• Journal of the Korean Vacuum Society
• /
• v.21 no.3
• /
• pp.178-184
• /
• 2012

Carbon coils could be synthesized on nickel catalyst layer-deposited silicon oxide substrate using $C_2H_2$ and $H_2$ as source gases and $SF_6$ as an additive gas under thermal chemical vapor deposition system. The characteristics (formation density and morphology) of as-grown carbon coils were investigated as functions of additive gas flow rate and the cycling on/off modulation of $C_2H_2/SF_6$ flows. Even in the lowest $SF_6$ flow rate (5 sccm) in this work, the cycling on/off modulation injection of $SF_6$ flow for 2 minutes could give rise to the formation of nanosized carbon coils, whereas the continuous injection of $SF_6$ flow for 5 minutes could not give rise to the carbon coils formation. With increasing $SF_6$ flow rates from 5 to 30 sccm, the cycling on/off modulation injection of $SF_6$ flow confines the geometry for the carbon coils to the nanosized ones. Fluorine's role of $SF_6$ during the reaction was regarded as the main cause for the confinement of carbon coils geometries to the nano-sized ones.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.36 no.1
• /
• pp.17-21
• /
• 1991

The study was performed to investigate the effects of gaseous emission of sulfur dioxide and hydrogen fluoride on the growth of rice plant under stressed field conditions. This study is specifically dealt with multiple effects of sulfur dioxide and hydrogen fluoride on various plant growth indicators such as leaf damage, weight of grain, panicles per hill, spikelets per panicle and percent fertility. It appears that there is a good correlation between ambient concentrations of sulfur oxides and sulfur contents found in leaves with an average correlation coefficient of 0.868 within a 1% significance level. A better multiple correlation was found between percent leaf damage and sulfur and fluorine contents found in leaf with a significance of 1% level. The correlation coefficient ranges from 0.807 to 0.978 with an average being 0.922. An evaluation of data observed has demonstrated that both panicles per hill and percent fertility are significantly affected by air pollutants. As expected, hydrogen fluorides have more effects than sulfur oxides. It is, however, interesting to note that spikelets per panicle has slightly been affected while no indication of effects on l000-grain weight has been observed. This may lead to a conclusion that a reduction in yield of rice under polluted field conditions may have more been caused by the diminution panicles per hill and percent fertility rather than by the diminution of spikelets per panicle and grain weight.

• Journal of Korean Society of Environmental Engineers
• /
• v.29 no.8
• /
• pp.909-914
• /
• 2007

Fluorine compounds are the essential chemicals for wet processes of semiconductor and LCD production line. Problems of conventional treatments for fluoride wastewater are their high operation costs and low fluoride removal capacity. In this study, cement paste containing various Ca-bearing hydrates such as portlandite, calcium silicate hydrate(CSH), and ettringite was investigated for fluoride removal. The objectives of this study are to assess the feasibility of using cement paste cured mixture of cement and water as an alternative agent for treatment of fluoride wastewater and to investigate fluoride removal capacity of the cement paste. The performance of cement paste was comparable to that of lime in the kinetic test. In column experiment where the effluent fluoride concentrations were below 0.5 mg/L. Then the leached calcium reached the maximum level of 800 mg/L. The nitrate reduced to the level of less than 10 mg/L. Nitrate in the wastewater was exchanged with interlayer sulfate of these cement hydrate LDHs. Phosphate concentration could be reduced to 10 mg/L by forming calcium phosphate. These results indicate that the cement paste generally has advantageous characteristics as an economical and viable substitute for lime to remove fluoride.