• 한국환경과학회지
• /
• 제13권10호
• /
• pp.947-953
• /
• 2004

Waterborne fluorinated acrylate copolymer (WFAC) for surface modification of textile was synthesized from perfluoroalkyl ethyl acrylate, octadecyl acrylate, glycidyl methacrylate, surfactant and 3,3 methyl-methoxy butanol. The structures of the synthesized WFAC were determinated by FT-IR and $^{19}F-NMR$ analysis. The thermal stability investigated with DSC and TGA was decreased with increasing the content of fluorinated acrylate in the copolymer. However, the particle sizes of WFAC were increased with increasing the content of fluorinated acrylate in the copolymer. The surface energies calculated by contact angles of WFAC were in the range of 29.80$\~$13.41 dyne/cm. On the observing SEM of the textile surface treated with WFAC, the textile was swollen and compacted with increasing the concentration of water repellency agent. WFAC synthesized in this study showed a good water repellency.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2007년도 7th International Meeting on Information Display 제7권1호
• /
• pp.80-82
• /
• 2007

We have developed a series of fluorinated dimethacrylate copolymers. Our work has covered the synthesized derivatives of alignment materials, characterized the pretilt angle and uniformity of liquid crystal alignment layer. The pretilt angle can be tailored by using the fluorinated copolymer. Excellent uniformity was achieved as shown in experimental results.

• Macromolecular Research
• /
• 제17권9호
• /
• pp.646-650
• /
• 2009

We report the fabrication of pentacene organic field-effect transistors (OFETs) using a fluorinated styrene-alt-maleic anhydride copolymer gate dielectric, which was prepared from styrene derivatives with a fluorinated side chain [$-CH_2-O-(CH_2)_2-(CF_2)_5CF_3$] and maleic anhydride through a solution polymerization technique. The fluorinated side chain was used to impart hydrophobicity to the surface of the gate dielectric and maleic anhydride was employed to improve its wetting properties. A field-effect mobility of 0.12 cm$^2$/Vs was obtained from the as-prepared top-contact pentacene FETs. Since various functional groups can be introduced into the copolymer due to the nature of maleic anhydride, its physical properties can be manipulated easily. Using this type of copolymer, the performance of organic FETs can be enhanced through optimization of the interfacial properties between the gate dielectric and organic semiconductor.

• Bulletin of the Korean Chemical Society
• /
• 제32권1호
• /
• pp.41-48
• /
• 2011

The wettabilities of the partially fluorinated polymers (ethylene-tetrafluoroethylene copolymer (ETFE), ethylenechlorotrifluoroethylene copolymer (ECTFE), and poly(vinylidene fluoride) (PVDF)) were investigated by contact angle measurements. Zisman plots for ETFE and ECTFE exhibited linear relationships, while the Zisman plot for PVDF showed a slight curvature, which was interpreted to indicate strong non-dispersive interactions between the surface and the contacting liquids. The Lifshitz-van der Waals forces of the fluoropolymers were estimated to increase in the order of ETFE < PVDF $\ll$ ECTFE. An evaluation of the polar or "acid-base" interaction energies showed that PVDF, which possesses the most acidic hydrogens among the examined fluoropolymers, has the strongest acid-base interactions.

• 폴리머
• /
• 제39권3호
• /
• pp.403-411
• /
• 2015

A series of hydrophobically associating fluorinated amphiphilic polyacrylamide copolymers with remarkably high heat resistance and salt tolerance were synthesized by free radical micellar copolymerization, using acrylamide (AM) and sodium 2-acrylamido-tetradecane sulfonate ($AMC_{14}S$) as amphiphilic monomers, and 2-(perfluorooctyl) ethyl acrylate (PFHEA) as hydrophobic monomer. The structure of the terpolymer was characterized by FTIR, $^1H$ NMR and $^{19}F$ NMR. The solution properties of the terpolymers were investigated in details, and the results showed that the terpolymer solution had strong intermolecular hydrophobic association as the concentration exceeded the critical association concentration 1.5 g/L. The terpolymer solution possessed high surface activity, viscoelasticity, excellent heat resistance, salt tolerance and shearing resistance. The viscosity retention rate of copolymer solution was as high as 59.9% under the condition of fresh wastewater, $85^{\circ}C$ and a 60-days aging test.

• 한국수소및신에너지학회논문집
• /
• 제27권6호
• /
• pp.660-669
• /
• 2016

A fluorinated-sulfonated, hydrophobic-hydrophilic copolymer was planed subsequently synthesized using typical nucleophilic substitution polycondensation reaction. A novel AB and ABA (or BAB) block copolymers were synthesized using sBCPSBP (sulfonated 4,4'-bis[4-chlorophenyl)sulfonyl]-1,1'-biphenyl), DHN (1,5-dihydroxynaphthalene), DFBP (decafluorobiphenyl) and HFIP (4,4'-hexafluoroisopropylidenediphenol). All block copolymers were easily cast and made into clear films. The structure and synthesized copolymers and corresponding membranes were analyzed using GPC (gel permeation chromatography), $^1H$-NMR ($^1H$ nuclear magnetic resonance) and FT-IR (Fourier transform infrared). TGA (Thermogravimetric analysis) and DSC (differential scanning calorimetry) analysis showed that the prepared membranes were thermally stable, so that elevated temperature fuel cell operation would be possible. Hydrophobic/hydrophilic phase separation and clear ionic aggregate block morpology was confirmed in both triblock and diblock copolymer in AFM (atomic force microscopy), which may be highly related to their proton transport ability. A sulfonated BAB triblock copolymer membrane with an ion-exchange capacity (IEC) of 0.6 meq/g has a maximum ion conductivity of 40.3 mS/cm at $90^{\circ}C$ and 100% relative humidity.

• 한국수소및신에너지학회논문집
• /
• 제28권5호
• /
• pp.465-470
• /
• 2017

Sulfonated fluorinated block copolymers having diphenyl units were mixed with the sulfonated cationic conductive polymers at an optimum mixing ratio to form hybrid membranes for fuel cells and their characteristics were studied. 2D and 3D AFM topology analysis confirmed that the number of hydrophilic units in the hybrid membrane was improved. Through the FE-SEM, the microstructure of the hybrid membrane implied hydrogen bonding and pi-pi interactions, and EDAX confirmed carbon, oxygen, sulfur, and fluorine. The thermogravimetric analysis showed that the hybrid membrane was thermally stable and the hydrophilicity of the hybrid membrane was increased by the contact angle of water droplets. As a result, it was confirmed that the cation conductivity increased by a factor of 1.8 times as the number of acidic domains in the hybrid film increased.

• 폴리머
• /
• 제29권5호
• /
• pp.463-467
• /
• 2005

Fluoroalkyl methacrylate, 아크릴산, 2-hydroxyethyl methacrylate(HEMA)를 공중합한 불소화 아크릴계 이온성 고분자로 제조한 이온성 고분자-백금 복합재료(IPMC)의 구동력을 증대시키기 위하여, HEMA의 OH기를 1,3-diethoxy-1,1,3,3-tetramethyldisiloxane으로 가교하였다. 가교반응에 의하여 IPMC의 수분흡수가 감소하면서, 기계적 강도, 구동력이 증가함을 관찰하였다. 그러나 IPMC의 구동성, 즉 외부 전위에 의한 변위와 전류량은 가교에 의해 감소하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2008년도 춘계 총회 및 학술발표회
• /
• pp.73-76
• /
• 2008

• Korean Membrane Journal
• /
• 제9권1호
• /
• pp.57-63
• /
• 2007

Amphiphilic graft copolymer from poly(vinylidene fluoride) (PVDF) was synthesized using atom transfer radical polymerization (ATRP) for composite nanofiltration membranes. Direct initiation of the secondary fluorinated site of PVDF facilitates grafting of tert-butyl methacrylate (tBMA). Amphiphilic PVDF-g-PMAA graft copolymer with a 51:49 wt ratio was obtained by hydrolyzing poly(tert-butyl methacrylate) (PtBMA) to poly(methacrylic acid) (PMAA). Wide angle X-ray scattering (WAXS) and differential scanning calorimetry (DSC) confirmed the decrease of crystallinity of PVDF upon graft copolymerization. Composite nanofiltration membranes were prepared from PVDF-g-PMAA as a top layer coated onto PVDF ultrafiltration (UF) support membrane. The morphology and hydrophilicity of membranes were characterized using scanning electron microscopy (SEM) and contact angle measurement. The rejections of composite membranes were 80.2% for $Na_2SO_4$ and 28.4% for NaCl, and the solution flux were 9.5 and $14.5\;L/m^2\;h$ at 1.0 MPa pressure.