• 대한소아치과학회지
• /
• 제32권1호
• /
• pp.136-143
• /
• 2005

이차 우식은 수복 실패의 주된 원인 중 하나로 지목되고 있으며, 이로 인해 빈번히 재수복을 하게 된다. 이차 우식은 항우식 작용이 있는 불소를 함유한 수복물을 사용하여 예방될 수 있다. 구강내에서 불소를 유리하는 것으로 알려진 글라스 아이오노머 수복재는 불소를 장기간 유리할 뿐 아니라 불소의 재충전 및 재유리 능력이 있어 불소의 저장소 역할을 할 수 있다. 따라서 본 연구는 통상의 글라스 아이오노머와 고점도 글라스 아이오노머 및 복합 레진을 대상으로 불소의 유리 양상과 불소도포를 통한 재흡수 후 유리 양상을 알아봄으로써 기존의 수복재와 새로운 수복재간의 임상적 유용성을 평가할 목적으로 시행하였다. 4종의 수복재를 대상으로 불소 유리량 및 2% NaF로 재충전 후 불소 유리량을 각각 측정하여 다음과 같은 결과를 얻었다. 1. 실험 대상의 모든 글라스 아이오노머 수복재는 초기에 다량의 불소를 유리하고 이후 점차 감소하는 경향을 보였다. 2. 2% NaF 용액을 통한 재충전 후의 유리량은 Fuji IX, Ketac Fil, Ketac Molar, Z-100의 순으로 나타났다. 3. Fuji IX을 제외한 모든 실험 대상의 수복재에서 수분의 영향으로 표면 경도는 유의하게 감소하였고 불소 재충전 후 유리량은 수분 흡수와 비례하였다(P<0.05). 4. Fuji IX이 초기 유리량에 비해 재충전 후 더 많은 불소를 유리였다(P<0.05).

• 대한소아치과학회지
• /
• 제35권3호
• /
• pp.469-476
• /
• 2008

본 연구는 새로 개발된 레진 강화형 글래스 아이오노머인 $Ketac^{TM}$ N 100과 Fuji Fil LC의 개선된 점을 보기 위해 불소 유리량과 압축 강도를 Fuji II LC와 비교 평가해 보았다. 불소 유리량 측정을 위해 각 재료 별로 시편을 15개씩 제작하여 탈이온수에 보관하였고, 31일 동안 pH/ISE meter(750P, Istek, Korea)를 이용하여 불소 유리량을 측정하였다. 압축 강도 측정을 위해 각 재료별로 15개씩 시편을 제작하여 만능 경성 시험기(Kyung-sung Testing Machine Co., Korea)를 이용하여 시편이 파절된 시점의 최대 강도를 측정하였다. 연구 결과 얻은 결론은 다음과 같다. 1. 전반적인 불소 유리량은 Fuji Fil LC, Fuji II LC, $Ketac^{TM}$ N 100 순으로 높았다(p<0.05). 2. 압축 강도는 Fuji II LC와 $Ketac^{TM}$ N 100은 유의한 차이가 없었고(p>0.05), Fuji Fil LC는 두 재료보다 낮은 압축 강도 값을 보였다(p<0.05). 이상의 결과를 종합해보면 $Ketac^{TM}$ N 100은 대조군인 Fuji II LC와 비교 시 불소 유리량은 적었으나 압축 강도는 유사했고 Fuji Fil LC는 불소 유리량은 높았고 압축 강도는 낮았다. 이런 재료의 특성에 맞게 임상 적용을 하는 것이 중요할 것이다.

• Restorative Dentistry and Endodontics
• /
• 제18권2호
• /
• pp.341-356
• /
• 1993

In the prevention of root surface caries, antimicrobial therapy for the control of subgingival and supragingival plaque is seriously considered as a long term suppression of pathogenic microflora. Recently, varnishes containing antimicrobial agents have been developed to control the supragingival microflora. The purpose of this study was to determine the antimicrobial effects of 20% chlorhexidine varnish and 2.6% silane fluoride varnish with sealant. In clinical experiments, 12 subjects were selected from the periodontally treated patient and divided into 3 groups. After a dental prophylaxis, the subjects were treated with single application of placebo varnish (group I), 20% chlorhexidine varnish (group II), and 2.6% silane fluoride varnish (group III). Root surface plaque samples were taken before (baseline) and one, two, four, and 8 weeks after the treatments. Microbiological examinations of root surface plaque were performed with culture study and indirect immunoflorescence (I.I.F.) study, and immunological examination of gingival crevicular fluid antibody titers was performed with ELISA study. The results were as follows: 1. Pathogenic microflora on the root surface including S. mutans, S. sanguis, S. mitis, A. naeslundii, A. viscosus were 24 - 37% on I.I.F. study. 2. S. mutans, S. sanguis, S. mitis, A. naeslundii, A. viscosus of the root surface plaque was significantly reduced from 1 week to 8 weeks after antimicrobial varnish treatment, but showed generally increasing tendency in control group. 3. Gingival crevicular fluid antibody titers were significantly reduced from 1 or 2 weeks to 4 weeks after antimicrobial varnish treatment.

• Restorative Dentistry and Endodontics
• /
• 제25권3호
• /
• pp.338-358
• /
• 2000

The effect of bench drying or removal of the periodontal ligament with NaOCl upon periodontal healing and root resorption after replantation of molars was studied in rats. A total of 40 Sprague-Dawley female rats were used and fed a powdered purina rat chow diet containing 0.4% beta-aminoproprionitrile. The maxillary first molars were extracted and the periodontal ligaments were removed either by bench drying for 15 minutes or by immersion in 2.5% NaOCl solution. The rats were sacrificed at 5, 10, and 21 days by heart infusion. In order to observe the effect of 0.5% stannous fluoride, $10^{-4}M$, $10^{-2}M$, and 1M etidronate disodium on the early stage of periodontal healing, the periodontal ligament was removed with 2.5% NaOCl followed by immersion of the molar in the respective solutions for 5 minutes. The rats were sacrificed after 10 days and the following results were obtained. 1. The removal of the periodontal ligament with 2.5% NaOCl seemed to be more effective than bench drying, since the resorption area in the NaOCl treated group showed a gradual increase whereas a decline in resorption area from 5 days to 21 days was observed in the bench dried group. 2. The application of 0.5% stannous fluoride seemed to enhance the periodontal ligament attachment and active migration of fibroblasts could be observed. 3. The application of $10^{-4}M$, $10^{-2}M$, and 1M etidronate disodium led to a good periodontal ligament attachment. No evident areas of root resorption were found. 4. The use of ${\beta}$-APN made it possible to extract the maxillary first molar with all five roots intact.

• 대한치과교정학회지
• /
• 제42권1호
• /
• pp.17-22
• /
• 2012

Objective: To study and compare the effects of different demineralization-inhibition methods on the shear bond strength (SBS) and fracture mode of an adhesive used to bond orthodontic brackets to demineralized enamel surfaces. Methods: Eighty freshly extracted, human maxillary premolars were divided into 4 equal groups and demineralized over the course of 21 days. Brackets were bonded to the demineralized enamel of teeth in Group 1. In Group 2, bonding was performed following resin infiltration ($ICON^{(R)}$, DMG, Hamburg, Germany). Before bonding, pre-treatment with acidulated phosphate fluoride (APF) or solutions containing casein phosphopeptide-amorphous calcium phosphate with 2% neutral sodium fluoride (CPP-ACP/wF) was performed in Groups 3 and 4, respectively. The SBS values of the brackets were measured and recorded following mechanical shearing of the bracket from the tooth surface. The adhesive remnant index (ARI) scores were determined aft er the brackets failed. Statistical comparisons were performed using one-way ANOVA, Tukey's post-tests, and G-tests. Results: Significant differences were found in some of the intergroup comparisons of the SBS values (F = 39.287, p < 0.001). No significant differences were found between the values for the APF-gel and control groups, whereas significantly higher SBS values were recorded for the resin-infiltrated and CPP-ACP/wF-treated groups. The ARI scores were also significantly different among the 4 groups (p < 0.001). Conclusions: Tooth surfaces exposed to resin infiltration and CPP-ACP/wF application showed higher debonding forces than the untreated, demineralized surfaces.

• Restorative Dentistry and Endodontics
• /
• 제27권2호
• /
• pp.175-182
• /
• 2002

Dental caries is a chronic disease that causes the destruction of tooth structure by the interaction of plaque bacteria, food debris, and saliva. There has been attempts to induce remineralization by supersaturating the Intra-oral environment around the surface enamel, where there is incipient caries. In this study, supersaturated remineralized solution "R" was applied to specimens with incipient enamel caries, and the quantitative analysis of remineralization was evaluated using microradiography. Thirty subjects volunteered to participate in this study. Removable appliances were constructed for the subjects, and the enamel specimen with incipient caries were embedded in the appliances. The subjects wore the intra-oral appliance for 15 days except while eating and sleeping. The removable appliance were soaked in supersaturated solution "R", saline, or Senstime$^{\circledR}$ to expose the specimen to those solutions three times a day, 5 minutes each time. After 15 days, microradiography was retaken to compare and evaluate remineralization The results were as the following: 1. The ratio of remineralized area to demineralized area was significantly higher in the supersaturated solution "R" and Senstime$^{\circledR}$ than in the saline (p<0.05) 2. Remineralization in the supersaturated buffer solution "R" occurred in the significantly deeper parts of the tooth. compared to the Senstime$^{\circledR}$ group containing high concentration or fluoride. (p<0.05) As in the above results, the remineralization effect of remineralized buffer solution "R" on incipient enamel caries has been proven. For clinical utilization, further studies on soft tissue reaction and the effect on dentin and cementum are necessary In conclusion compared to commercially available fluoride solution. remineralization solution“R”showed better remineralization effect on early enamel caries lesion, so it is considered as effecient solution for clinical application.

• Restorative Dentistry and Endodontics
• /
• 제45권1호
• /
• pp.6.1-6.8
• /
• 2020

Objectives: This study investigated the effects of a hydrofluoric acid (HA; solution of hydrogen fluoride [HF] in water)-based smart etching (SE) solution at an elevated temperature on yttria-stabilized tetragonal zirconia polycrystal (Y-TZP) ceramics in terms of bond strength and morphological changes. Materials and Methods: Eighty sintered Y-TZP specimens were prepared for shear bond strength (SBS) testing. The bonding surface of the Y-TZP specimens was treated with 37% phosphoric acid etching at 20℃-25℃, 4% HA etching at 20℃-25℃, or HA-based SE at 70℃-80℃. In all groups, zirconia primers were applied to the bonding surface of Y-TZP. For each group, 2 types of resin cement (with or without methacryloyloxydecyl dihydrogen phosphate [MDP]) were used. SBS testing was performed. Topographic changes of the etched Y-TZP surface were analyzed using scanning electron microscopy and atomic force microscopy. The results were analyzed and compared using 2-way analysis of variance. Results: Regardless of the type of resin cement, the highest bond strength was measured in the SE group, with significant differences compared to the other groups (p < 0.05). In all groups, MDP-containing resin cement yielded significantly higher bond strength values than MDP-free resin cement (p < 0.05). It was also shown that the Y-TZP surface was etched by the SE solution, causing a large change in the surface topography. Conclusions: Bond strength significantly improved when a heated HA-based SE solution was applied to the Y-TZP surface, and the etched Y-TZP surface was more irregular and had higher surface roughness.