• Korean Journal of Environmental Agriculture
• /
• v.6 no.2
• /
• pp.53-65
• /
• 1987

The study was performed to investigate the effect of gaseous emissions of sulfur dioxide and hydrogen fluoride on the growth of rice plants under stressed field conditions consisting of 88 industrial plants operating with 285 smoke stacks emitting pollutants. As for the relationship between yields and yield components it is believed that the panicles per hill is the single most important component affecting the rate of yield of the rice plant. Based on the standard partial regression coefficient analysis, panicles per hill has the largest contribution to yield and the average contribution of 54%. Other components such as spikelets per panicle, percent fertility and 1000 grain weight are also contributing factors to yield, although far less so. Fluorine content in the leaf appear to have more negative effect on panicles per hill, percent fertility and subsequent overall yield than does sulfur content in the leaf. It is constantly observed and interesting to note that fluorine and sulfur content in the leaf appears to have no effect on spikelets per panicle and 1000 grain weight. Reduction in yield seems to be affected mainly by panicles per hill which are, in turn, affected more by fluorine content in the leaf as demonstrated by the standard partial coefficient analysis. Regarding the prediction sum of the square of the regression equation, the lowest value was found when nine variables were used for the analysis. The variables taken into consideration were the monthly sulfur and fluorine content in the leaf as well as the monthly percent of leaf damage during the months of June, July and August. A significant correlation is found between the actual and predicted yields by the regression equations selected as a result of a prediction sum of the square analysis.

• Journal of the Korean Applied Science and Technology
• /
• v.34 no.4
• /
• pp.938-946
• /
• 2017

This study was conducted to examine the changes in serum lipid components and blood glucose by krill (Euphausia superba) meal and sodium fluoride (NaF) in rats fed on experimental diets and administered orally to NaF 10 mg for 5 weeks. Body weight of rats decreased as the amount of krill meal diet increased, it was observed the basal diet plus NaF group (BF group) compared to the lower basal diet group (BD group). The serum concentrations of total cholesterol, LDL (low-density lipoprotein) cholesterol, free cholesterol, triglyceride (TG), phospholipid (PL) and blood glucose in serum were higher in the BF group than the 10% krill meal group plus NaF 10 mg (KF10 group) or BD group, the 20% krill meal plus NaF 10 mg group (KF20 group), the 30% krill meal plus NaF 10 mg group (KF30 group). Conversely depending on the content of krill meal for the HDL (high-density lipoprotein) cholesterol level, it showed higher results. The concentration of total protein was no significant difference among the groups (p<0.05). The results indicate that a krill meal diet effectively inhibited increases in lipid elevation and blood glucose level in the sera of rats.

• Journal of Food Hygiene and Safety
• /
• v.21 no.1
• /
• pp.36-40
• /
• 2006

This study was conducted to investigate the effects of hot spring water against the survival of food-borne and pathogenic microorganisms. Staphylococcus aureus, Bacillus cereus, and Escherichia coli, which are food-borne microorganisms, Candida albicans and Trichophyton mentagrophytes, which are skin disease pathogens, and Helicobacter pylori, gastritis inducing microorganism, were tested. The content of fluoride in tested hot spring water is 14.1 mg/L, which is higher than the standard of safe for drinking water 1.5 mg/L, but the results on 48 other items were up to the standard. Hot spring water didn't show the bactericidal effects against food-borne microorganisms, C. albicans, and H. pylori tested. However, the viable cell populations of B. cereus and T. mentagrophytes were decreased, which were depends on the temperature of hot spring water. From these results, we confirmed that hot spring water didn't show the bactericidal effects against food-borne microorganisms, skin disease pathogens, and gastritis inducing microorganism, but the growth of some microorganisms were inhibited by high temperature ($41^{\circ}C$).

• Journal of Information Display
• /
• v.11 no.1
• /
• pp.8-11
• /
• 2010

In this study, a new thin films passivation technique using Zn with high electronegativity and $MgF_2$, a fluorine material with better optical transmittance than the sealing film materials that have thus far been reported was proposed. Targets with various ratios of $MgF_2$ to Zn (5:5, 4:6 and 3:7) were fabricated to control the amount of Zn in the passivation films. The Mg-Zn-F films were deposited onto the substrates and Zn was located in the gap between the lattices of $MgF_2$ without chemical metathesis in the Mg-Zn-F films. The thickness and optical transmittance of the deposited passivation films were approximately 200 nm and 80%, respectively. It was confirmed via electron dispersive spectroscopy (EDS) analysis that the Zn content of the film that was sputtered using a 4:6 ratio target was 9.84 wt%. The Zn contents of the films made from the 5:5 and 3:7 ratio targets were 2.07 and 5.01 wt%, respectively. The water vapor transmission rate (WVTR) was determined to be $38^{\circ}C$, RH 90-100%. The WVTR of the Mg-Zn-F film that was deposited with a 4:6 ratio target nearly reached the limit of the equipment, $1\times10^{-3}\;gm^2{\cdot}day$. As the Zn portion increased, the packing density also increased, and it was found that the passivation films effectively prevented the permeation by either oxygen or water vapor. To measure the characteristics of gas barrier, the film was applied to the emitting device to evaluate their lifetime. The lifetime of the applied device with passivation was increased to 25 times that of the PLED device, which was non-passivated.

• Journal of the Korean Electrochemical Society
• /
• v.12 no.4
• /
• pp.324-328
• /
• 2009

The internal short-circuit between cathodes and anodes has been known to be a critical concern for the safety failures of lithium-ion batteries, which is strongly influenced by the thermal stability of separators. In this study, to effectively suppress the internal short-circuit failures, we developed a new composite separator with the improved thermal stability compared to conventional polyolefin-based separators. The composite separators were prepared by introducing a ceramic coating layer ($Al_2O_3$/PVdF-HFP) onto both sides of a polyethylene (PE) separator. The microporous structure of ceramic coating layers is determined by controlling the phase inversion of coating solutions and becomes more developed with the increase of nonsolvent (water) content. This structural change of ceramic coating layers was observed to greatly affect the thermal stability as well as the electrochemical performance of composite separators, which was systematically discussed in terms of phase inversion.

• Journal of the Korean Electrochemical Society
• /
• v.4 no.1
• /
• pp.6-9
• /
• 2001

[ $SiO_2$ ] effect on the electrochemical properties of polymeric gel electrolytes(PGEs) reinforced with glass fiber cloth(GFC) was investigated . PGEs were composed of polyacrylronitrile(PAN), poly(vinylidenefluoride-co-hexafluoropropylene) (P(VdF-co-HFP)), $LiClO_4$ and three kind of plasticizer(ethylene carbonate, dietyl carbonate, propylene carbonate). $SiO_2$ was added to PGEs in the weight fraction of 10, 20, $30\%$ respectively. PGEs containing $SiO_2$ showed conductivity of over $10^{-3}S/cm\;at\;23^{\circ}C$ and electrochemical stability window to 4.8V. In the impedance spectra of the cells, which were constructed by lithium metals as electrodes, interfacial resistance increased due to growth of passivation layer during storage time and remarkable difference was not observed with content of $SiO_2$. In the impedance spectra of the lithium ion polymer batteries consisted of $LiClO_2$ and mesophase pitch-based carbon fiber(MCF), ohmic cell resistance of $SiO_2-free$ PGE was changed continuously with number of cycle, but those of $SiO_2-dispersed$ PGEs were not. Discharge capacity of the PGE containing $20wt\%\;SiO_2$ showed 132 mAh/g at 0.2C rate and $85\%$ of discharge capacity was retained at 2C rate.

• Journal of dental hygiene science
• /
• v.15 no.4
• /
• pp.419-423
• /
• 2015

Recently, energy drink consumption is rising. The purpose of this study was to examine the effect of energy drink on enamel erosion by measuring pH and titratable acidity in energy drink on the market. pH and titrable acidity in drink were measured by selecting 3 kinds of energy drinks with high sales volume among energy drinks on the domestic market. To evaluate the erosion level of normal enamel, the erosion level was measured by using a surface micro-hardness after soaking it in drink for 1 minute, for 3 minutes, for 5 minutes, for 10 minutes, and for 30 minutes while using 10 pieces of bovine specimens per each group. All the energy drinks were containing citric acid. As for pH in drinks, pH of Burn intense was the lowest with $2.51{\pm}0.01$. Hotsix stood at $3.16{\pm}0.01$. Redbull stood at $3.37{\pm}0.00$. In pH 5.5, the titrable acidity of Burn intense was 3.59 ml. Redbull was 3.43 ml. Hotsix was 1.92 ml. All the energy drinks were reduced the surface micro-hardness according to a rise in time of immersion. Following the 30-minute treatment in drinks, the surface micro-hardness value was indicated to be the lowest in Redbull with $119.72{\pm}15.16$ VHN. It was shown to be in order of Hotsix $208.75{\pm}10.99$ and Burn intense $210.47{\pm}8.01$. Hotsix and Burn intense had no statistically significant difference (p>0.05). Accordingly, all the energy drinks, which were used in the experiment, caused the tooth enamel erosion. Among them, Redbull led to the largest enamel erosion. Thus, energy drink containing citric acid and low pH can cause the enamel erosion. However, it is thought to be necessarily progressed by considering factors of influencing etching a little more diversely by additionally analyzing intraoral factors, acid kinds, and even the content in calcium, phosphate and fluoride.

• Polymer(Korea)
• /
• v.37 no.1
• /
• pp.80-85
• /
• 2013

Anionic polymerization of hexafluoropropylene oxide (HFPO) was investigated under various reaction conditions such as various hexafluoropropylene (HFP) oligomers composed of dimer and trimer, reaction temperatures, and feeding rates of hexafluoropropylene oxide monomer. HFP oligomer was synthesized from cesium fluoride (CsF) and HFP in tetraethyleneglycol dimethylether (TG). Under 5 g of CsF, 200 g of HFP, 10 g of TG, and reaction temperature $30^{\circ}C$, HFP dimer content in oligomer was relatively increased. HFPO oligomer with a high molecular weight ($M_w$ 3600) was synthesized in conditions of reaction temperature $0^{\circ}C$, HFP oligomer with 35.1% of dimer, and 1.85 g/min of HFPO feeding rate. Otherwise, chain transfer was increased under unoptimized reaction conditions. Consequently, it was found that reaction conditions impact chain propagation and chain transfer in the anionic polymerization of HFPO.

• Journal of the Korean Electrochemical Society
• /
• v.22 no.4
• /
• pp.155-163
• /
• 2019

Mixture electrodes of a graphite having a good cycle performance and a silicon monoxide (SiO) having a high capacity are fabricated and their cycle performances are evaluated as negative electrodes for lithium-ion batteries. The electrode prepared by mixing the natural graphite and carbon-coated SiO in a mass ratio of 9:1 shows a reversible capacity of $480mAh\;g^{-1}$, 33% higher than that of graphite. However, the capacity deteriorates continuously upon cycling due to the volume change of silicon monoxide. In this study, the factors that can improve the cycle performance have been discussed through the change in the configurations of the electrode and the electrolyte. The electrode using the carboxymethyl cellulose (CMC) binder shows the best cycle performance compared to the conventional binders. The electrode sing the CMC and styrene-butadiene rubber (SBR) binder not only has almost the similar cycle characteristics with the electrode using the CMC binder but also has the better rate capability. When the fluoroethylene carbonate (FEC) is used as an electrolyte additive, the cycle life is improved. However, the electrolyte with 5 wt% of FEC is appropriate because the rate capability decreases when the content of FEC is increased to 10 wt%. In addition, when the mass loading of the electrode is lowered, the cycle performance is greatly improved. Also, enhanced cycle performance is achieved using the roughened Cu current collector polished by abrasive paper.

• Applied Chemistry for Engineering
• /
• v.32 no.3
• /
• pp.290-298
• /
• 2021

A purification process was performed for the application of natural graphite as an anode material. The influence of the structural change and impurity content of graphite according to the process on the anode electrochemical characteristics was investigated. Natural graphite was chemically/physically purified by acid-treatment which used different amounts of solution of ammonium fluoride/sulfuric acid in the same ratio and thermal treatment used different temperatures (800~2500 ℃). Acid-treatment had limitation to remove impurities, and identified that all impurity contents was removed except some traces of atom such as Si by after progressed thermal-treatment until 2500 ℃. The anode materials characteristic of graphite treated by purification process was improved, and changes in the structure and impurity contents affected dominantly the capacity, rate property and initial Coulombic efficiency. Consequently, the complex purification process improved the graphite structure and also the performance of lithium ion battery by controlling the excessive formation of solid electrolyte interphase and expanding Li⁺ insertion space originated from the effective removal of impurities.