• 한국해양환경ㆍ에너지학회지
• /
• 제12권1호
• /
• pp.55-59
• /
• 2009

중소형 폐 선박으로부터 생성되는 FRP를 재활용하기 위한 방법으로 층상으로 배열된 로빙층과 매트층을 분리하는 것은 에너지 면에서나 환경적인 면에서 많은 장점을 가지고 있다. 비록 로빙층과 매트층은 그 비율은 다르나 모두 수지와 유리를 포함한다는 유사성과 로빙층은 매트층에 비해 얇은 두께로 존재한다는 이유로 인해 로빙층을 매트층과 분리할 때 기계가 자동적으로 충간의 차이를 인식하기는 어렵다. 본 연구에서는 유리의 구성비가 다른 두 층의 화학적 성질의 차를 이용하여 광학적으로 층간 인식이 가능한 방법을 모색하였다. FRP에 대해 (1) FRP의 층 사이에 존재하는 수지를 녹이는 진한 황산, 또는 (2) 유리를 녹이는 염기성 용액(KOH의 메탄올과 아이소프로판올 용액), (3) 유리의 $SiO_2$와 반응하는 플루오르산(HF)용액, (4) HF 용액으로 처리한 후 수용성 염료를 도포한 경우, 각각 두 층간의 차별화가 일어났다. 이 결과를 이용하여 폐 FRP의 분리 공정이 단순화될 수 있을 것이다.

• Restorative Dentistry and Endodontics
• /
• 제16권1호
• /
• pp.87-105
• /
• 1991

The purpose of this experiment was to measure the leaking and solubility of commonly used dental restorative materials - Silux plus (CS), Hi-pol (CH), Clearfil F-II, Fissureseal (FS), Glass-Ionomer cement Fuji Type II (GI), Amalgam Cavex 68 (AM), Zinc Phosphate Cement (ZP) and gutta-percha (GP) and investigate the relation between the solubility and marginal leakage. Disc-shape specimens were fabricated with each material and dipped into deionized water, 0.01M lactic acid and 0.005M KOH solution, thus the total ionic concentrations in each solution was measured with ion chromatograph after 1, 3, and 7 days, respectively. For the solubility test, each specimen was immersed in 0.001M and 0.01M lactic acid for 24 hours, respectively and total weight loss was calculated. Also, Zn leaking through the margin of restorations was measured. The obtained results were as follows: 1. The amounts of eluted ion from the eight materials were most in 0.01M lactic acid and least in deionized water. 2. Of the eight materials, the fluoride release was greatest for glass ionomer cement (GI) in 0.01 M lactic acid after 7 days. 3. In analysis of the divalent cation, Mg was eluted most for zinc phosphate cement (ZP) and Ca for Clearfil F-II (CF) in 0.01M lactic acid after 7 days. 4. In analysis of transition metals, Cu and Zn were detected only. 5. The solubility rate of eight materials was greater in 0.01M lactic acid than in 0.001M for 24 hours, for zinc phosphate cement (ZP) the rate was greatest (5.4%) in 0.001M lactic acid, and amalgam least (0.01%). 6. The Zn concentration of restorative material with Z.P.C base was greater in 0.01M lactic acid than in 0.001M lactic acid.

• Membrane and Water Treatment
• /
• 제7권3호
• /
• pp.209-221
• /
• 2016

As a highly hydrophilic fibrillar mineral in nature, attapulgite (ATP) is a promising new additive for preparation of ultrafiltration (UF) hybrid membrane. In this work, ATP particles, which were grafted with a new Gemini surfactant of Ethyl Stearate-di(octadecyl dimethyl ammonium chloride) to detach the crystal bundles to single crystal and enhance the uniform dispersion in an organic polymer matrix, were incorporated into poly(vinylidene fluoride) (PVDF) matrix, and PVDF/Gemini-ATP hybrid membranes for adsorptive removal of Ni(II) ions from aqueous solution were prepared via a phase inversion method. Chemical composition, crystalization and morphology of the modified ATP were characterized by Fourier transform infrared spectroscopy (FTIR), Transmission electron microscope (TEM) and X-ray diffraction (XRD), respectively. The morphology of the hybrid membrane was characterized by Scanning electron microscopy (SEM), the performance of permeability, hydrophilicity and adsorption of Ni(II) ions were studied, and the adsorption kinetics of the PVDF/ATP hybrid membranes were particular concerned. The results showed that the hybrid membrane displayed a good thermal stability and hydrophilicity. Comparing with PVDF membrane, the hybrid membrane possessed good adsorption capacity for Ni(II) ions, and the adsorption kinetics fit well with Lagergren second-order equation.

• 멤브레인
• /
• 제16권1호
• /
• pp.68-76
• /
• 2006

본 연구는 투과증발법을 이용하여 수용액 중 미량의 감귤 향 성분을 농축하는 방법으로, 4종류의 실록산계 고분자 복합막을 이용하여 막 종류와 구조에 따른 투과 특성을 살펴보았다. 또한 최적의 막을 선정하여 공급액의 온도와 농도, 순환 유속에 따른 투과 특성을 살펴보고, 이를 resistance-in series model을 이용하여 해석하였다. 4종류의 실록산계 고분자 복합막을 통한 감귤 essence aroma 모델액의 투과 실험에서 지지층이 polyvinylidene fluoride (PVDF)이고 활성층이 polyoctylmethyl siloxane (POMS)인 막이 가장 높은 향 성분 플럭스와 농축계수 값을 나타내었으며, 공급액의 온도와 농도, 순환유속을 변화시키며 투과 실험을 하였다. 그 결과 공급액의 온도와 농도가 증가됨에 따라 향성분의 플럭스는 증가하고 농축계수 값은 감소하였으며 순환유속이 증가됨에 따라 향성분의 플럭스와 농축계수 값 모두 증가하였다.

• 한국치위생학회지
• /
• 제17권5호
• /
• pp.817-826
• /
• 2017

Objectives: The aim of this study was to investigate the effects of bamboo salts on remineralization effects on subsurface of artificial carious enamel. Methods: Incipient carious enamel was formed in permanent bovine incisors and then specimens were divided into three groups randomly: 3% bamboo salt (BS), 2% (NaF) and the solution of mixed 3% BS and 2% NaF. For remineralization, specimens of each of the three groups were treated for 24 hrs at $37^{\circ}C$ incubator. After treatment, specimens were analyzed using SEM and VHN. Statistical analysis used was one-way ANOVA. Results: In SEM observation, the BS group showed narrower distances between enamel rods than the cases of incipient subsurface caries enamel. The NaF and BS+NaF groups showed that the enamel rods near the surface were destructed, and innumerable round small particles were deposited near the surface of enamel. The BS+NaF group showed more minerals attachment between enamel rods than the cases of other groups. The differences in subsurface microhardness (${\Delta}VHN$) increased all of three groups in total by $80{\mu}m$. The ${\Delta}VHN$ of the BS+NaF group increased significantly more than NaF and BS groups in depth of $50{\mu}m$, $80{\mu}m$. Conclusions: The 3% bamboo salt with 2% NaF solution was found to increase subsurface hardness of incipient caries enamel. Thus, bamboo salt will be used to contribute to prevention on dental caries.

• Advances in environmental research
• /
• 제3권3호
• /
• pp.185-197
• /
• 2014

Efficient defluorination of perfluorooctanoic acid (PFOA) was achieved by integrating UV irradiation and $Fe^{2+}$ activation of persulfate ($S_2O{_8}^{2-}$). It was found that the UV-$Fe^{2+}$, $Fe^{2+}-S_2O{_8}^{2-}$, and UV-$S_2O{_8}^{2-}$ processes caused defluorination efficiency of 6.4%, 1.6% and 23.2% for PFOA at pH 5.0 within 5 h, respectively, but a combined system of UV-$Fe^{2+}-S_2O{_8}^{2-}$ dramatically promoted the defluorination efficiency up to 63.3%. The beneficial synergistic behavior between $Fe^{2+}-S_2O{_8}^{2-}$ and UV-$S_2O{_8}^{2-}$ was demonstrated to be dependent on $Fe^{2+}$ dosage, initial $S_2O{_8}^{2-}$ concentration, and solution pH. The decomposition of PFOA resulted in generation of shorter-chain perfluorinated carboxylic acids (PFCAs), formic acid and fluoride ions. The generated PFCAs intermediates could be further defluorinated by adding supplementary $Fe^{2+}$ and, $S_2O{_8}^{2-}$ and re-adjusting solution pH in later reaction stage. The much enhanced PFOA defluorination in the UV-$Fe^{2+}-S_2O{_8}^{2-}$ system was attributed to the fact that the simultaneous employment of UV light and $Fe^{2+}$ not only greatly enhanced the activation of $S_2O{_8}^{2-}$ to form strong oxidizing sulfate radicals ($SO{_4}^{\cdot-}$), but also provided an additional decarboxylation pathway caused by electron transfer from PFOA to in situ generated $Fe^{3+}$.

• 융합정보논문지
• /
• 제8권6호
• /
• pp.43-48
• /
• 2018

완전 수입에 의존하는 ITO를 대체할 수 있는 FTO 필름에 회로를 형성시킬 수 있는 식각액을 제조하였다. 이 식각액은 불화물 1 ~ 30량%, 산 1 ~ 20량%, 계면활성제 0.5 ~ 5 중량%, 용매제 5 ~ 20 량%, 부식억제제 0.5 ~ 10중량%, 나머지는 물로 이루어진다. 이 식각액은 드라이필름을 이용한 식각공정이 가능하여 비용을 절감할 수 있으며, 식각액의 거품발생 및 찌꺼기가 발생하지 않는 특징이 있다. 식각액의 특성은 100nm 두께의 FTO를 2분 만에 식각할 수 있었고 이때 $50^{\circ}C$의 식각액 온도를 유지하였다. 2분 식각액에 넣었을 때 -0.00364%의 언더컷을 얻었다. Cd, Pb, Hg, Cr 성분 등의 환경유해물질은 측정되지 않았다. 희토류가 나지 않는 우리나라에서 FTO를 활용하면 국산화 및 수입대체효과를 이룩할 수 있다.

• Advances in materials Research
• /
• 제13권3호
• /
• pp.153-160
• /
• 2024

This study investigates the application of alternating current (AC) and direct current (DC) anodization techniques on stainless steel 304L (SS304L) in an ethylene glycol and ammonium fluoride (NH4F) electrolyte solution to produce a nano-porous oxide layer. With limited research on AC anodizing of stainless steel, this study focuses on comparing AC and DC anodization in terms of current density versus time response, phase analysis using X-ray diffraction (XRD), and corrosion rate determined by linear polarization. Both AC and DC anodization were performed for 60 minutes at 50 V in an electrolyte solution containing 0.5% NH4F and 3% H₂O in ethylene glycol. The results show that AC anodization exhibited higher current density compared to DC anodization. XRD analysis revealed the presence of ferrite (α-Fe) and austenite (γ-Fe) phases in the as-received specimen, while both AC and DC anodized specimens exhibited only the γ-Fe phase. The corrosion rate of the AC-anodized specimen was measured at 0.00083 mm/year, lower than the corrosion rate of the DC-anodized specimen at 0.00197 mm/year. These findings indicate that AC anodization on stainless steel offers advantages in terms of higher current density, phase transformation, and lower corrosion rate compared to DC anodization. These results highlight the need for further investigation and exploration of AC anodization as a promising technique for enhancing the electrochemical properties of stainless steel.

• 한국세라믹학회지
• /
• 제39권3호
• /
• pp.315-320
• /
• 2002

저농도로 희석된 HF 수용액(6 wt%)을 사용하여 $Al(OH)_3$의 표면을 F/Al의 몰비 0.15에서 처리하고, 처리 전후 표면특성을 관찰하였다. 반응계의 온도 및 pH 변화로부터 $Al(OH)_3$에 대한 HF의 표면반응은 HF와 접촉한 $Al(OH)_3$ 표면부에서 metastable한 ${\alpha}$형의 불화알루미늄$({\alpha}-AlF_3{\cdot}3H_2O)$이 안정한 ${\beta}$형의 불화알루미늄$({\beta}-AlF_3{\cdot}3H_2O)$으로 전이되는 과정으로 진행되며, 다량의 발열을 수반하면서 반응계의 온도상승을 유발하였다. 이러한 ${\beta}-AlF_3{\cdot}3H_2O$의 생성은 표면처리된 분말의 FT-IR 및 X-선 회절분석결과를 통해 확인되었다. ${\beta}-AlF_3{\cdot}3H_2O$의 morphology와 분포상태를 SEM을 통해 관찰한 결과 $Al(OH)_3$ 표면에 $1{\mu}m$ 이하의 미세분말 형태로 피복층을 형성하며 균일하게 분포된 것으로 확인되었다. HF로 처리된 시료의 표면 백색도는 미처리에 비해 약 6.6% 증가되었으며, 이는 $Al(OH)_3$보다 높은 백색도를 지닌 ${\beta}-AlF_3{\cdot}3H_2O$ 피복 효과 때문인 것으로 나타났다.

• 한국세라믹학회지
• /
• 제41권10호
• /
• pp.749-755
• /
• 2004

불화규산($H_2SiF_6$)은 인산 혹은 불산 제조공정에서 발생되는 사불화규소($SiF_4$)의 흡수공정에 의해 수용액 상태로 회수된다. 불화규산과 금속염의 반응에 의해 생성된 규불화염을 시멘트에 첨가하면 시멘트와의 특이 수화반응에 의해 독특한 물성을 발휘된다. 본 연구에서는 상기 공정에 의해 회수된 불화규산(농도 : $25\pm2\%$)과 금속염을 반응시켜 3가지 농도($4\%,\;6\%,\;8\%$)의 2성분 규불화염계 혼화제(MZ)를 제조하고, 시멘트 중량의 동일 첨가량($C\times1.0\%$)에서 시멘트 수화반응 및 수밀성에 대해 MZ의 농도변화에 따른 효과를 관찰하였다. MZ가 첨가된 시멘트 수화과정중 $CaF_2$와 같은 난용성 금속불화물과 가수분해에 의한 가용성 실리카가 새로이 생성되었다. MZ가 첨가된 경화시멘트의 총 공극율은 난용성 금속불화물의 충전작용과 가용성 실리카의 포졸란 작용에 의해 감소되었다. 궁극적으로 시멘트와 MZ간의 특이 수화반응에 의해 MZ가 첨가된 시멘트 경화체의 수밀성이 개선되는 것으로 나타났다.