• 식품보건융합연구
• /
• 제5권4호
• /
• pp.13-17
• /
• 2019

Amiodarone hydrochloride is an antiarrhythmic agent which has low aqueous solubility and presents bioavailability problem. These properties are a challenge for the pharmaceutical industry. Inclusion of lipophilic compound in the hydrophobic core of micelles, i.e. self-assembled structures based on surfactants in aqueous solution, is one way of increasing the solubility. Intravenous formulation of amiodarone hydrochloride with polysorbate 80 as a detergent and benzyl alcohol as a co-solvent is used in medical practice. This paper aimed to study the effect of polysorbate 80 and benzyl alcohol on the water solubility of amiodarone hydrochloride. Formation of mixed micelles consisting of nonionic surfactant polysorbate 80 and cationic amiodarone with chloride counterion was investigated by fluorescence spectroscopy. Benzyl alcohol was found to decrease the stability of the mixed micelles and lead to crystallization of amiodarone hydrochloride. The greatest amounts of crystals formed at 4℃ for 30 days in the model drug solutions with polysorbate 80 concentrations of 100.1 mg/mL and 97.9 mg/mL. A change of the polysorbate 80 concentration and avoidance the use of benzyl alcohol are recommended to improve the stability of the parenteral dosage form. These results can open new perspectives in the optimization of amiodarone intravenous formulations.

• Journal of Pharmaceutical Investigation
• /
• 제34권4호
• /
• pp.305-310
• /
• 2004

This study was to prepare the anionic liposomes which were to release anticancer drug (doxorubicin) at the hyperthermia temperature $({\sim}42^{\circ}C)$ and to stabilize in bovine serum solution at $37^{\circ}C$. The vesicle size and zeta potential of liposomes in Tris-HCl buffered solution (pH 7.4) were measured by an electrophoretic light scattering spectrophotometer. To estimate the stability of liposomes, liposome size was measured in bovine serum solution at $37^{\circ}C$ for 72 h. The release of doxorubicin from liposome was determined by measuring the fluorescence intensity using fluorescence spectrophotometry with temperature and time. The size of liposomes was from 120 to 160 nm and zeta potential was from $-33.3{\pm}2.4$ to $-75.6{\pm}6.9\;mV$. Anionic liposome was stabilized in bovine serum solution at $37^{\circ}C$ within 72 h. Additionally, the release transition temperature of doxorubicin from liposomes was increased by increasing mole % of anionic phospholipid.

• 한국식품영양과학회지
• /
• 제27권3호
• /
• pp.508-517
• /
• 1998

We investigated the effects of godulbaegi extracts on the physiochemical properties of biological membranes as membrane stability and fluidity employing the phospholipid liposomal membrances as a biomembrane-mimetic system. The addition of the godulbaegi extracts to the phospholipid exterted great effects stagbilized the barrier function of the liposomal membranes in proportion to the concentration of the additive and significantly increased the membranes fluidity. The values of the fluorescence polarization of 1,6-diphenyl 1,3,5-hexatriene (DPH) decreased gradually as the temperature increased, and decreased abruptly near the phase transition temperature (Tm) of the liposome from gel to liquid crystalline state as usual. These results suggest that the activities of the godulbaegi extracts to enhance the stability and fluidity of the liposomal membranes have implication in their biological activities.

• 대한수의학회지
• /
• 제30권1호
• /
• pp.41-49
• /
• 1990

These experiments were carried out to develop a novel, simple, and rapid method to determine urinary sulfonamides using fluorescamine by spectrofluorometry. To get optimal conditions for the sulfonamide-fluorescamine reaction, sulfonamides such as sulfamethazine, sulfamerazine, sulfadimethoxine and sulfamonomethoxine, dissolved in buffers with various pH ranges were reacted with various concentrations of fluorescamine. and then, the fluorescence intensity and stability of the fluorophore were measured. To eliminate the interfering substances in urine, the fluorophore in buffers and urine with a definite pH range was extracted with some organic solvents. After then the fluorescence intensity was measured in organic and aquous phases. The results obtained were summarized as follows: 1. The maximal fluorescence of sulfonamides was presented in acidic state, pH 4.5~5.0, at 30 minutes after reaction. 2. The optimal concentration ratio of sulfamethazine and ffuorescamine was more than 1 : 40 in mole. 3. In pH 4.0, the intensity was maximal but was time-dependent, whereas in pH 8.0, the intensity was time-independent. 4. Sulfamethazine-fluorescamine conjugate could be dissolved in some of organic solvents in acidic state such as chloroform, n-butanol, and ethylacetate. 5. Sulfamethazine-flnorescamine conjugate in swine urine coule be extracted with ethylacetate in acidic state, pH 4.0~5.0.

• Journal of Microbiology
• /
• 제40권4호
• /
• pp.319-326
• /
• 2002

Cellular DNA in prokaryotes is organized in nucleic acid-protein self-assemblies referred to as the nucleoid. The physical forces responsible for its stability inside the poor solvent properties of the cytoplasm and their functional implications are not understood. Studies on the organisation and functioning of the cytosol of cells largely rely on experimental protocols performed in highly dilute solutions using biochemically purified molecules, which is not a reliable substitute for the situation existing in vivo. Our current research interest is focused on the characterization of biological and physical forces determining the compaction and phase separation of DNA in Escherichia coli cytoplasm. We have emphasized the effect of excluded volume in solutions with high macromolecular concentrations (macromolecular crowding) upon self-association patterns of reactions. The prokaryotic cytosol was simulated by addition of inert polymer polyethylene glycol (PEG) (average molecular weight 20000), as an agent which afterwards facilitates the self-association of macromolecules. Fluorescence microscopy was used for direct visualization of nucleoids in intact cells, after staining with DAPI (4',6-diamidino-2-phenylindole dihydrochloride). Addition of the crowding agent PEG 20,000, in increasing concentrations generated progressively enhanced nucleoid compaction, the effect being stronger in the presence of 0.2 M NaCl and 5 mM MgCl$\_$2/. Under these conditions, the nucleoids were compacted to volumes of around 2 ㎛$\^$3/ or comparable sizes with that of living cells.

• 한국염색가공학회지
• /
• 제30권2호
• /
• pp.63-69
• /
• 2018

In this study, we report on successful attempt towards the synthesis of sulfur self-doped $g-C_3N_4$ by directly heating thiourea in air. The synthesized materials were characterized using UV-vis spectral technique, FT-IR, XRD and TEM analysis. Further, the obtained material shows an excellent detection of carcinogenic TNP(Tri nitro phenol) in the presence of 10-fold excess of various other common interferences. The strong inner filter effect and molecular interactions(electrostatic, ${\pi}-{\pi}$, and hydrogen bonding interactions) between TNP and the $S-g-C_3N_4$ Nano sheets led to the fluorescence quenching of the $S-g-C_3N_4$ Nano sheets with an excellent selectivity and sensitivity towards TNP compared to that of other nitro aromatics under optimal conditions and the detection limit calculated was found to be 6.324 nM for TNP. The synthesized nanocomposite provides a promising platform for the development of sensors with improved reproducibility and stability for ultra-sensitive and selective sensing of TNP.

• 한국추진공학회지
• /
• 제9권4호
• /
• pp.55-65
• /
• 2005

에어 터보 램제트 엔진 연소기에서 연료와 공기의 혼합성능은 연소 효율과 안정성에 중요한 요인이 된다. 에어 터보 램제트 축소모형의 연소기에서 혼합기에 따른 혼합성능을 파악하기 위하여 두개의 꽃잎형 혼합기를 제작하였고, 각각에 대하여 연료 분포를 측정하였다. 2차원 연료 분포 측정에는 평면 레이저 유도 형광 기법을 사용하였다. 획득한 아세톤 형광 이미지는 이미지 처리 기법을 사용하여 정량적 연료 분포로 나타내었다. 이러한 연료 분포 이미지를 바탕으로 연료와 공기의 혼합성능이 좋은 혼합기를 알아내었다.

• 기계저널
• /
• 제33권12호
• /
• pp.1031-1042
• /
• 1993

연소현상에 대한 이해를 증가시키기 위하여 화염을 이용한 많은 실험적 연구가 이루어져 왔다. 특히 연소 모델의 개선과 증명을 위하여는 화염에서의 성분 농도 측정이 필수적이며, 최근에 들어 측정 가능해진 래디컬성분의 측정은 연소해석분야에 많은 진전을 가져왔다. OH, H 및 O는 연료의 분해 (decomposition) 및 연소 산화물생성 이외에도 CO와 NO 같은 공해물질의 형성등 연소과정에서 매우 중요한 래디컬들이며, 특히 화염영역에서의 OH의 전파(transport)는 화염의 점화 및 안정성 (stability)에도 큰 영향을 미친다. OH래디컬은 연소과정에서 가장 중요한 성분 중 하나이며, 또한 스펙트럼이 비교적 잘 알려져 있어 레이저 유도 형광의 적용이 용이하므로 화염에서의 OH농도 측정에 LIF(laser induced fluorescence) 또는 PLIF(planar laser induced fluorescence)가 널리 사용되고 있다. 따라서 LIF 및 PLIF의 원리 및 연소분야에서의 응용을 OH농도 측정을 중심으로 소개하고자 한다.

• 한국축산식품학회지
• /
• 제39권4호
• /
• pp.623-631
• /
• 2019

Tetramethylpyrazine (TMP), an alkaloid rich in Ligusticum wallichii and fermented products, possesses multiple pharmacological activities in antioxidant, antiinflammatory, and antibacterial. This study aimed to investigate the effect of TMP (15 mg/L) on the physicochemical and gelation properties of rabbit myofibrillar proteins (MPs) with/without oxidative stress. Results showed that compared to the control, oxidative stress to MPs decreased free thiol content, gel yield, whiteness, water-holding capacity, bounder water, immobilized water, and endogenous tryptophan fluorescence intensity, but increased surface hydrophobicity, dityrosine content, and free water content (p<0.01). Without oxidative stress, MPs treated with TMP increased free thiol content, whiteness, and bound water, but decreased dityrosine content and free water (p<0.05). Under oxidative conditions, all parameters were conversely affected by TMP (p<0.01). The results suggest that TMP can be an antioxidant to decrease the concern on oxidative deterioration during meat processing and storage by improving the oxidative stability, water retention, and gel forming property of rabbit MPs.

• The Journal of Advanced Prosthodontics
• /
• 제5권2호
• /
• pp.84-91
• /
• 2013

PURPOSE. The aim of this study was to evaluate the stability of arginine-glycine-aspartic acid (RGD) peptide coatings on implants by measuring the amount of peptide remaining after installation. MATERIALS AND METHODS. Fluorescent isothiocyanate (FITC)-fixed RGD peptide was coated onto anodized titanium implants (width 4 mm, length 10 mm) using a physical adsorption method (P) or a chemical grafting method (C). Solid Rigid Polyurethane Foam (SRPF) was classified as either hard bone (H) or soft bone (S) according to its density. Two pieces of artificial bone were fixed in a customized jig, and coated implants were installed at the center of the boundary between two pieces of artificial bone. The test groups were classified as: P-H, P-S, C-H, or C-S. After each installation, implants were removed from the SRPF, and the residual amounts and rates of RGD peptide in implants were measured by fluorescence spectrometry. The Kruskal-Wallis test was used for the statistical analysis (${\alpha}$=0.05). RESULTS. Peptide-coating was identified by fluorescence microscopy and XPS. Total coating amount was higher for physical adsorption than chemical grafting. The residual rate of peptide was significantly larger in the P-S group than in the other three groups (P<.05). CONCLUSION. The result of this study suggests that coating doses depend on coating method. Residual amounts of RGD peptide were greater for the physical adsorption method than the chemical grafting method.