• Korean Journal of Optics and Photonics
• /
• v.8 no.4
• /
• pp.353-355
• /
• 1997

A single molecule detection system, which consists of confocal fluorescence microscope and single photon counter, has been used to observe the dye concentration dependence of photon counting rate. With increasing concentration, a saturation effect of counting is observed and demonstrated on the basis of the dead time of photon detector. The equations presented here show the relations between the counting rate and some parameters such as probe volume, quantum efficiency of detector, and fluorescence photon number entered onto detector. The signal-to-noise ratio is also discussed briefly.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.187-190
• /
• 2002

Confocal microscopy is very popular technology in bio-medical inspection due to its ability to reject background signals and to measure very thin slide of thick specimens, which is called optical sectioning. But intensity of detected signal in fluorescence type confocal microscopy is so small that only 0.2% of emitted fluorescence light can be detected in the best case. In this paper, we proposed the reflecting optical system to improve the detection intensity and designed the optical system by optimal design method. At the end of the paper, we analyzed the characteristics of the proposed reflecting optical system.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.12
• /
• pp.1922-1929
• /
• 2007

A simple whole-cell-based sensing system is proposed for determining the cell mass of H. pluvialis using ultraviolet fluorescence spectroscopy. An emission signal at 368 nm was used to detect the various kinds of green, green-brown, brown-red, and red H. pluvialis cells. The fluorescence emission intensities of the cells were highest at 368 nm with an excitation wavelength of 227 nm. An excitation wavelength of 227 nm was then selected for cell-mass sensing, as the emission fluorescence intensities of the cell suspensions were highest at this wavelength after subtracting the background interference. The emission fluorescence intensities of HPLC-grade water, filtered water, and HPLC-grade water containing a modified Bold's basal medium (MBBM) were measured and the difference was less than 1.6 for the selected wavelengths. Moreover, there was no difference in the emission intensity at 368 nm among suspensions of the various morphological states of the cells. A calibration curve of the fluorescence emission intensities. and cell mass was obtained with a high correlation ($R^2=0.9938$) for the various morphological forms of H. pluvialis. Accordingly, the proposed method showed no significant dependency on the various morphological cell forms, making it applicable for cell-mass measurement. A high correlation was found between the fluorescence emission intensities and the dry cell weight with a mixture of green, green-brown, brown-red, and red cells. In conclusion, the proposed model can be directly used for cell-mass sensing without any pretreatment and has potential use as a noninvasive method for the online determination of algal biomass.

• Journal of Photoscience
• /
• v.9 no.2
• /
• pp.385-387
• /
• 2002

Direct EPR evidence of the photo-generation of superoxide radicals ( $O_2$$^{-.}$) was obtained by using spin trapping techniques in spinach photosystem II (PSII) membranes. $O_2$$^{-.}$ was detected by following the formation of 5-diethoxyphosphoryl-5-methyl-1 -pyrroline-N-oxide (DEPMPO) superoxide adducts, DEPMPO-OOH. The significant increase of the EPR signal amplitude of DEPMPO-OOH in N$H_2O$H-, CaC $l_2$- and NaCl-treated PSII membranes showed that the oxygen-evolving system has a close relation to the $O_2$$^{-.}$ production. PSII membranes with inactivated donor side could not prevent the $O_2$$^{-.}$ production efficiently. Treatments on PSII donor side also influence the maximum level and the kinetics of Chlorophyll (Chi) a fluorescence. Results suggested that manganese cluster and extrinsic proteins might affect Chi a fluorescence in ways different from that happens at the acceptor side of PSII.SII.SII.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.103.1-103.1
• /
• 2014

Due to their excellent optical and electrochemical properties, conjugated polymers have attracted much attention over the last two decades and employed to opto-electrical devices. In particular, conjugated polymers possess many attractive features that make them suitable for a variety of sensing task. For example, their delocalized electronic structures can be strongly modified by varying the surrounding environment, which significantly affected molecular energy level. In other word, conjugated polymers can detect and transduce the environmental information into a fluorescence signal. Conjugated polymers also display amplified quenching compared to small molecule counterparts. This amplified fluorescence quenching is attributed to the delocalization and migration of the excitons along the conjugated polymer backbones. Long backbones of conjugated polymer provide the transporting path for electron as a conduit, allowing that excitons migrate rapidly into quencher site along the backbone. This is often referred to as the molecular wire effect or antenna effect. Moreover, structures of conjugated polymers can be easily tailored to adjust solubility, absorption/emission properties, and regulation of electron/energy transfer. Based on this versatility, conjugated polymers have been utilized to many novel sensory platforms as a promising material. In this tutorial, I will highlight a variety of fluorescence sensors base on conjugated polymer and explain their sensory mechanism together with selected examples from reference literatures.

• Journal of Biosystems Engineering
• /
• v.35 no.6
• /
• pp.458-463
• /
• 2010

It is required to develop rapid methods to identify pathogenic Salmonella in food products for protecting and maintaining safety of the public health from Salmonellosis. The objective of the present study was to explore feasibility of the nanotechnology to detect pathogenic Salmonella rapidly in various samples. Sensitivity of the a composite quantum dot to detect Salmonella typhimurium in samples were evaluated. For selective detection of Salmonella, anti-Salmonella polycolonal antibody was utilized to capture and stain Salmonella. Quantum dots were attached onto Salmonella in the samples and produced fluorescent light. Fluorescence response of the composite quantum dot was measured with a commercial fluorescence meter. The fluorescence signal starts to increase with the samples in which higher concentration of the cells were contained. The sensitivity of the sensor was $10^6\;CFU/mL$ Salmonella spiked in PBS.

• Nuclear Engineering and Technology
• /
• v.25 no.4
• /
• pp.548-551
• /
• 1993

A simple and new uranium analysis technique for raffinate solution of nuclear fuel conversion process was developed using a time-resolved laser-induced fluorimetry. The addition of 4 M-phosphoric acid more than 10 times in volume to the raffinate sample was found to be efficient for obtaining stable uranium fluorescence signal which was not influenced by many fluorescence quenchers. A calibration curve of a good linearity for the fluorescence intensity vs. the uranium concentration was obtained at the range of 3.0$\times$10$^{-6}$－6.0$\times$10$^{-5}$ M U $O_2$$^{2＋}$ in the raffinate samples.

• Journal of Sensor Science and Technology
• /
• v.31 no.4
• /
• pp.266-270
• /
• 2022

Owing to the rising volume of seaborne trade, oil spills damage the marine environment for over 250 yearly. Thus, various analysis methods such as the Fourier-transform infrared (FTIR), Raman spectroscope, and gas chromatography are used to monitor oil spills at sea, but these methods are expensive. Recently, to reduce operational costs, an underwater fluorometer was adopted. However, this approach is not ideal for the remote sensing of oil spills because the device gets submerged in the sea. In this study, we have designed and developed a monitoring system that uses ultraviolet fluorescence to detect spilled oil or water from a distance, as well as proposed an analyzing method defining based on water Raman signal and QF535. Each fluorescence spectrum of water, oil (crude oil), and Bunker A was obtained using the system, and was calculated and analyzed from the spectrum individually. Based on the results of the analysis, we could successfully identity water and oil at a long distance.

• Journal of Life Science
• /
• v.15 no.6 s.73
• /
• pp.935-940
• /
• 2005

Fluorescence change of coumarin labeled phosphate binding protein (PBP-MDCC) was monitored to measure the amount of released inorganic phosphate ($P_{i}$) during nucleoside triphosphate (NTP) hydrolysis reaction. After purification of PBP-MDCC, fluorescence emission spectra showed that fluorescence responded linearly to $P_{i}$ up to about 0.7 molar ratio of $P_{i}$ to protein. The correlation of fluorescence signal and $P_{i}$ standard was measured to obtain [$P_{i}$] - fluorescence intensity standard curve on the stopped-flow instrument. When T7 bacteriophage helicase, double-stranded DNA unwinding enzyme using dTTP hydrolysis as an energy source, reacted with dTTP, the change of fluorescence was able to be converted to the amount of released $P_{i}$ by the $P_{i}$ standard curve. $P_{i}$ release results showed that single-stranded Ml3 DNA stimulated dTTP hydrolysis reaction several folds by T7 helicase. Instead of end point assay in NTP hydrolysis reaction, real time $P_{i}$-release assay by PBP-MDCC was proven to be very easy and convenient to measure released $P_{i}$.

• Annals of Laboratory Medicine
• /
• v.38 no.6
• /
• pp.619-622
• /
• 2018