• Journal of the Korean Society of Safety
• /
• v.18 no.3
• /
• pp.94-100
• /
• 2003

Gel-like compounds containing flammable solvents were prepared to use fur cleaning agents in field of innovative industries and general purposes. And experiments were conducted to improve the defects of liquified flammable solvents from the view point of safety and health hazards. Flammable solvents used in this study were several single component flammable solvents(turpentine oil, N-methyl-2-pyrrolidone(NMP), d-limonene) and multi component flammable solvent(gasoline and ethanol). For gelation of flammable solvents, commercially Known as Aerosil(equation omitted) 200 fumed silica and triethanolamine(TEA) were used as gelation agent dispersant. The analyses on properties of gel-like compounds was studied by gelation and viscosity test pH test, volatility test and differential scanning calorimetry(DSC) measurement. The experimental results indicate that gel-like compounds containing flammable solvents have pH stability, high viscosity, volatile organic compounds(VOC) control by the decrease of volatility and odor component generation, fluidity control etc. From the experimental values, it can be predicted that the safety in the working place is improved by manufacturing flammable solvents into gel-like compounds.

• Journal of Pharmaceutical Investigation
• /
• v.24 no.3
• /
• pp.131-137
• /
• 1994

Drug delivery system by the use of red blood cells was established to sustain the release of drugs in the circulatory system by the intravenous injection. The entrapment method by the preswelling technique was re-examined and evaluated for searching the new entrapping conditions without hemolysis. The addition of 4 volume of $0.6{\times}\;hank's$ balanced salt solution (HBSS) into 1 volume of 50% red blood cells suspension did not induce the hemolysis and change the hematocrit level in this experimental condition (within 15 min). Most of daunorubicin could be entrapped into red blood cells within 15 min. While the intracellular adenosine triphosphate (ATP) level followed by the entrapment was reduced to 86% of normal ATP level, the membrane fluidity and the shape factor of red blood cells were not altered. The release rate of daunorubicin from red blood cells was affected by the hemolysis under this condition. To maintain the intracellular ATP in red blood cells, the new reaction buffer was made With the addition of ATP and sodium pyruvate during the entrapment procedure because the hemolysis during the release test would reflect the loss of intracellular ATP that might result in the decrease of the viability in vivo. The addition of ATP raised the intracellular ATP level, which protect the hemolysis during the release test.

• Korean Journal of Child Studies
• /
• v.1
• /
• pp.28-39
• /
• 1980

I. OBJECTIVES The aim of this study lies in examining following items: 1. Difference in creativity between boys and girls 2. Inter correlation of the sub-variables of creativity 3. Correlation between parent-child relationship and creativity 4. The relationship between creativity and number of siblings 5. Creativity and birth-order II. METHODS & PROCED URES 1. Instruments: Standardized Creativity Test and Parent-Child Relationship Test for children 2. Objects: 118 boys and 97 girls enrolled in primary schools in Seoul who were selected by random sampling 3. Procedure: (1) The data of the boy group and the girl group were analized by means of M,t, SD. (2)The relationships between creativity and the number of siblings as well as the relationship between creativity and birth order were analyzed by M. (3) Inter-correlations among the sub-factors of creativity were obtained in boys and girls. (4) Complex-correlations between creativity and parent child relationship were produced. III. RESULTS 1. There were no significant differences between boy and girl in creativity. 2. Inter correlation among the sub-factors of creativity Boy: The highest scores were obtained in fluidity, and adaptability, the lowest in originality and openness. Girl: The highest score were obtained in world scribbling and fluidity, the comparatively low were in originality and a match-problem. 3. Inter-correlation between creativity and parent-child relationship a. Father-son: The positive refusal type has the most significant relation and conflict type, discrepancy type, negative type in turn have significant inter-coorelations. b. Mother-son: Discrepancy type, conflict type, positive refusal type have high correlations, while negative refusal type, anticipation type, and anxiety show significance in 5% level. c. Father-daughter: Positive refusal type shows correlation of 5% level significance, while indulgence type shows negative correlation in 1% level significance. d. Mother-daughter: Discrepancy type shows 5% level significance, while indulgence type shows negative correlation in 1% level. 4. Concerning the number of siblings, it was found that, boys and girls alike, those grown among 3 or 5 showed most creativity. 5. Concerning the birth order, it was found that, boys and girls alike, the first child showed the most creativity, and the youngest showed the next to the most, while the middle showed the least creativity.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2008.04a
• /
• pp.765-768
• /
• 2008

Silica fume is a very important gradient in UHPC(Ultra High Performance Concrete) and its amount is normally over 25% of cement(wt.%). But we surely need to comprehend the influence of the amount of silica fume on the UHPC. In this paper, it was investigated how the amount of silica fume influence on the properties such as fluidity, compressive strength, elastic modulus, and flexural strength. Furthermore, it was examined the internal micro structure on UHPC through the test of SEM and MIP. In results, If we properly use silica fume in UHPC, fluidity and strength of UHPC was increased. It can be ascertained through the test of MIP that silica fume effectively increased density of UHPC by posolanic reaction and acting as filler. Especially, In case of Cement to silica fume ratio$0.1{\sim}0.25%$, we can be concluded that UHPC has similar to mechanical property.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.502-509
• /
• 2007

This paper investigated how Fine Fly Ash (FFA) with $14,000\;cm^2/g$ of Fineness affects the micro structure and material properties of High-Performance Concrete (HPC) before and after hardening from Material Test of HPC and Cement Paste. FFA is applied as a substitute of Silica Fume which is used necessarily in producing HPC. As a Material Test results, 5% FFA series specimen shows the lower fluidity than SF series specimen. When, however, the Fluidity of 10% FFA series specimen is increased reversely to the similar value of SF series specimen. The Porosity of FFA series specimen of 3 day age is displayed to $21{\sim}24%$, which is higher than $19{\sim}20%$ porosity of SF series specimen, while that of 28 day age is reached to $8{\sim}9%$, which is improved compared with 10% fo SF series specimen. It can be thought that FFA has better influence on the porosity of HPC in case of long term age. The Compressive strength of FFA series specimen shows the similar result with the property of porosity. The compressive strength of 28 day age FFA series specimen is $98{\sim}106%$ of SF series specimen and 107% of plain specimen to reveal better strength development.

• Journal of the Korean Geotechnical Society
• /
• v.24 no.4
• /
• pp.47-55
• /
• 2008

This study was carried out to investigate and analyse the influence of maximum size of coarse aggregate and quality control of aggregate on the properties of shotcrete through the laboratory and field test. From the results of the test, as the maximum size of coarse aggregate decreased from 13 mm to 8 mm, plasticity property declined and compressive strength and dynamic modulus of elasticity of hardened concrete increased remarkably, so it was found that the aggregate size 8 mm was superior to 13, 10 mm in fluidity, constructability and durability. Therefore, it was advisable for well maximum size of coarse aggregate to apply to the 8mm aggregates through the Ready-mixed Method for quality control and minimum segregation.

• Journal of Korea Foundry Society
• /
• v.35 no.6
• /
• pp.147-154
• /
• 2015

The effects of Sc and Sr elements on the modification of the eutectic $Mg_2Si$ phase and the castability were investigated in the Al-4wt%Mg-0.9wt%Si-0.3wt%Mn-0.15wt%Fe alloy. Measurements of the cooling curve and microstructure observations were performed to analyze the additional effects of Sc and Sr minor elements during the solidification process. A prominent effect found on the modification of the eutectic $Mg_2Si$ phase with additions of the Sr and Sc elements. Here, a fine eutectic $Mg_2Si$ phase and a decrease in the growth temperature of the eutectic $Mg_2Si$ phase were evident with an addition of Sc element up to 0.2 wt%. The growth temperature of the eutectic $Mg_2Si$ phase decreased and the effect on the modification of the eutectic $Mg_2Si$ phase increased with the addition of Sr element up to 0.02 wt%. The addition of 0.02wt%Sr had the strongest effect on the modification of the eutectic $Mg_2Si$ phase, and the resulting microstructure of the eutectic $Mg_2Si$ phase was found to have a fibrous morphology with a decreased aspect ratio and an increased modification ratio. Fluidity and shrinkage tests were conducted to evaluate the castability of the alloy. The addition of 0.02wt%Sr effectively increased the fluidity of the alloy, while an addition of Sc did not show any effect compared to when nothing was added. The maximum filling length was recorded for 0.01wt%TiB-0.02wt%Sr owing to the effect of the fine ${\alpha}$-Al grains. The macro-shrinkage ratio decreased, while the micro-shrinkage ratio increased with the addition of various eutectic modifiers. The highest ratio of micro-shrinkage was recorded for the 0.02wt%Sr condition. However, the total shrinkage ratio was nearly identical regardless of the amounts added in this study.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.21 no.3
• /
• pp.27-34
• /
• 2017

Recently, the importance of the industrial warehouse floor has been increasing due to the development of the distribution and logistics industry. In this present study, an early-hardening polymer floor mortar which can compensate for the limitation of conventional cement based floor mortar regarding fluidity and long curing time was developed. In order to achieve the early-hardening of mortar characteristic ultra rapid hardening cement was used as binder. Four types of mixture proportions in accordance with the vinyl acetate ethylene(VAE) polymer contents with range from 10% to 20% and the other proto proportion without VAE polymer were designed. Mechanical experiments including the fluidity test, compressive strength test, bending test, bond test, and abrasion test were conducted for all mixture proportions. From the flow test result, it was possible to achieve the high flow with 250 mm by controlling the amount of superplasticizer. The incorporation of VAE polymer was found to affect the compressive strength reduction, however, the flexural strength was higher than that of the proto mixture, and it was evaluated to increase the compressive strength / flexural strength ratio. Moreover, at least 2.6 times higher bond strength and more than 4 times higher abrasion resistance were secured. From the mechanical experiments results, the optimum mixing ratio of the VAE polymer was determined to be 10%. As a result of application and monitoring, it shows that it has excellent resistance to cracking, discoloration, impact, and scratch as well as bond performance compared to the cement based floor mortar.

• Journal of the Korean Recycled Construction Resources Institute
• /
• v.3 no.1
• /
• pp.72-79
• /
• 2007

This study investigates the engineering properties of concrete incorporating lime stone crushed fine aggregate(Ls), which has been abandoned about 20% of total production due to the low purity. Test results showed that increase of Ls had favorable fluidity and slightly decreased air content. Bleeding capacity of all specimens was not appeared as those were high strength mixture proportion, but the specimens using more Ls accelerated initial and final setting. For the mechanical properties, specimens incorporating higher ratio of Ls, overall, resulted in increase of compressive strength, and exhibited very small inclined tendency in a dynamic elasticity modulus test In addition, for the durability properties, specimens incorporating higher Ls dramatically decreased a drying shrinkage and showed similar tendency in a frost & thaw test, as well as showing no more change in an accelerated neutralization test from the beginning. In conclusion, as it was confirmed in the experimental test, the high strength concrete applying Ls did not showed any problems in the aspects of engineering properties and mostly exhibited even more excellent quality than the specimens using natural fine aggregate.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.05a
• /
• pp.757-762
• /
• 2001

CFT concrete has high flowing, high strength and resistance to material separation to use skyscraper structure. It is considered that concrete could fill the lower part of Diaphragm up. This kinds of CFT concrete hardly apply to building below 20 stories. Using the common use strength concrete to building below 20 stories brings to reduce construction cost. This concrete is needed that valid fluidity and packing ability with unit cement content as common use strength concrete. Offering a fundamental data and proportioning in CFT concrete of below 20 stories, it is executed basic property test, analysis of proportioning and mock up test.