• 한국분말재료학회지
• /
• 제1권1호
• /
• pp.21-26
• /
• 1994

Aluminum was deposited on aluminum oxide powders using a fluidized bed reactor at atmospheric pressure. The aluminum oxide powders were irregular flakes with acute angles and the average particle size was 26 $\mu\textrm{m}$. The fluidized bed was formed by flowing argon gas at the velocity of 60 cm/sec. The optimal fluidization condition was obtained with the reactor designed to be tapered so that the fluid velocity decreases as the fluidizing gas goes up along the reactor. Aluminum was deposited by flowing TiBA(Triisobutylaluminum) evaporated at$250^{\circ}C$ through the fluidized bed reactor heated to 350~$450^{\circ}C$. The result from the analysis by XRD and EDAX confirmed the coating of aluminum and an SEM micrograph showed the conformality.

• 한국결정성장학회:학술대회논문집
• /
• 한국결정성장학회 1998년도 PROCEEDINGS OF THE 15TH KACG TECHNICAL MEETING-PACIFIC RIM 3 SATELLITE SYMPOSIUM SESSION 4, HOTEL HYUNDAI, KYONGJU, SEPTEMBER 20-23, 1998
• /
• pp.117-121
• /
• 1998

The Rapid Expansion of supercritical fluid Solutions (RESS) process was applied to particles coating. Experiments were conducted in a fluidized bed with an internal nozzle in the center of the reaction tube. Microcapsules (mean particle size : 49$\mu\textrm{m}$) prepared by spray drying method were used as the core particles. Supercritical CO2 solutions of paraffin were expanded through the nozzle in to the bed that was fluidized by air. Surface morphology prepared particles was observed by SEM. For the inspection of particle size change, particle size distributions were measured before and after coating. The releasing behavior of Mg2+ ions inspected by AA.

• Journal of Pharmaceutical Investigation
• /
• 제41권2호
• /
• pp.67-73
• /
• 2011

Ion exchange resins can be one of the good carriers for sustained drug release. However, the sustained release may not be enough only with themselves and hence film coating with rate controlling polymers can be applied to have a further effect on the drug release. Due to the environmental and economic issues of organic solvent for the polymer coating, aqueous polymeric systems were selected to develop dosage forms. Among the many aqueous polymeric dispersions for the film coating, EC (ethylcellulose) based polymers such as Aquacoat$^{(R)}$ ECD and Surelease$^{(R)}$ were evaluated.A fluid-bed coating was applied as a processing method. The drug release rate was quite dependent on the coating level so the release rate could be modified easily by changing different levels of the coating. The drug release rate in the Aquacoat$^{(R)}$ coated resin particles was strongly dependent on curing, which is a thermal treatment to make homogeneous films and circumvent drug release changes during storage. After dissolution test using the compressed tablets in which the coated resin particles are contained, inhomogeneous coating and even pores could be observed showing that the mechanical properties of EC were not resistant to granulation and compaction process. However, when tablets were prepared in different batches, the release profiles were almost identical showing the feasibility of the coated resin particle as incorporated into the tablet formulation.

• 한국결정성장학회지
• /
• 제8권4호
• /
• pp.673-676
• /
• 1998

초임계 분출법(RECC)을 미립자 코팅에 이용하였다. 본 실험은 반응관 중심부에 위치한 노즐을 갖고 있는 유동층 내부에서 수행하였다. 핵입자로는 glass beads(500~590$\mu$m, 74$\mu$149$\mu$m)와 brilliant blut로 피복된 glass beads의 두 종류를 사용하였다. paraffin이 용해된 초임계 $CO_2$는 공기에 의해 유동중인 유동층 내부 노즐을 통해 분무시켰다. 핵입자 표면에 코팅물질이 피복됨을 SEM과 FT-IR에 의한 분석을 통하여 확인할 수 있었다. 코팅 전호 brilliant blue의 용출특성을 ABC로 조사한 결과 코팅입자의 용출특성이 향상되었음을 확인하였다.

• Journal of Industrial and Engineering Chemistry
• /
• 제68권
• /
• pp.274-281
• /
• 2018

Experimental studies of the hydrodynamic performance of the draft tube conical spout-fluid bed (DCSF) were conducted using pharmaceutical pellets. The experiments were carried out in a DCSF consisted of two sections: (a) a conical section with the cross section of $120mm{\times}250mm$ and the height of 270 mm, (b) a cylindrical section with the diameter of 250 mm and the height of 600 mm. The flow characteristics of solids were investigated with a high speed camera and a pezoresistive absolute pressure transducer simultaneously. These characteristics revealed different flow regimes in the DCSF: packed bed at low gas velocities, fluidized bed in draft tube at higher gas velocities until minimum spouting, and spouted bed. The stable spouting was identified by the presence of two dominant frequencies of the power spectrum density of pressure fluctuation signature: (i) the frequency band 6-9 Hz and (ii) the frequency band 12-15 Hz. The pressure drops across the draft tube as well as the annulus measured in order to better recognize the flow structure in the DCSF. It was observed that the pressure drop across the draft tube, the pressure drop across the annulus, and the minimum spouting velocity increase with the increase in the height of draft tube and distance of the entrainment zone, but with the decrease in the distributor hole pitch. Finally, this study provided novel insight into the hydrodynamic of DCSF, particularly minimum spouting and stable spouting in the DCSF which contains valuable information for process design and scale-up of spouted bed equipment.

• 한국결정성장학회지
• /
• 제9권1호
• /
• pp.55-59
• /
• 1999

초임계 분출법을 이용하여 입자의 코팅을 행하였다. 핵입자로는 분무건조법으로 제조된 Microcapsule을 사용하였으며, 코팅 물질로는 녹는 점이 다른 두 종류의 파라핀을 사용하였다. 파라핀이 녹아 있는 초임계 $CO_{2}$ 용액은 공 기에 의해 유통중인 유통층 내부로 작은 직경의 노즐을 통해 분출된다. 이 때 추출조의 온도와 압력은 각각 $50~120^{\circ}C$, $150~200\;kg/\textrm{cm}^2$으로 변화시켰다. 이론적인 코팅 두께를 계산하였으며, 코팅층의 분석은 SEM과 FT-IR을 사용하였다. $Mg^{2+}$ ion의 용출특성은 원자홉광광도계를 사용하여 조사하였다.

• 약학회지
• /
• 제39권6호
• /
• pp.593-599
• /
• 1995

Erythromycin was formulated as enteric-coated pellets in order to reduce degradation in stomach and gastromtestmal irritation, and to maximize the absorption in intestine followmg its oral administration. Core pellets were prepared using fluid-bed granulator with two different methods (powder layering and solvent spraying) and enteric-coated with two different coating polymers (HPMCP and Eudragit E30D). Physical characteristics md dissolution rates of core pellets and enteric-coated pellets were evaluated to optimize the formulation. Powder layering method resulted in shorter initial dissolution time than solvent spraying method, but physicochmical properties of the product were worse than solvent spraying method with respect to hardness, ftiability and density. The dissolution rate of the drug was increased with the addition of surfactants, showing concentration-dependence. The scanning electron microscopic observation of pellets revealed significant differences on the surface appearances prepared with solvent spraying method. The core pellet made with powder layering method had crystals on the surface, which resulted in poor physical properties of the pellets. The dissolution profiles of erythromycin pellets coated with HPMCP or Eudragit L30D were close to that of commercially available erythromycin enteric-coated product.

• Applied Biological Chemistry
• /
• 제29권3호
• /
• pp.241-247
• /
• 1986

쌀밥 품질의 영향 요인을 규명하기 위하여 밥 짓기 과정중 밥과 밥물의 상호 관계를 분석하고, 저급의 장립종 밀양 23호의 밥맛 증진의 수단으로 새로운 밥짓기 방법을 제시하였다. 밥짓기 과정중 밥과 밥물의 높이 변화를 측정하였다. 끊는점 부근에서 밥물이 급격히 감소하고, 이어서 농축된 밥물이 밥알 표면에 엷은 피막층을 형성함을 관찰할 수 있었다. 피막 보강 물질로 찹쌀분 1,2%(W/W)를 첨가 한 후 밥짓기를 향한 결과, 피막이 크게 보강되었으며 이렇게 제조된 밥은 윤기와 외관이 향상되고 수분 함량이 증가하였으며 밥짓기중 가용성 쌀 고용분 함량의 용출을 감소시킬 수 있었다. 밥알 피막의 형성은 밥짓기의 최종단계에서 밥알의 진동과 밥물의 고형분 농도와 유관함을 보였고, 밥의 음질 결정의 중요 요소로 작용할 수 있음을 제안하였다.

• Journal of Pharmaceutical Investigation
• /
• 제38권2호
• /
• pp.105-110
• /
• 2008

Indapamide (4-chloro-N-(2-methyl-1-indolinyl)-3-sulfamoyl-benz-amide) is an oral antihypertensive diuretic agent indicated for the treatment of hypertensive. The diuretic and natriuretic effects are mainly due to the structure of o-chlorobenzenesulfonamide. The objective of this study was to formulate sustained release indapamide granules and assess their formulation variables. Granules were prepared by fluid bed coating method and consist of drug layer and membrane layer. The granules were coated with HPC and ethyl cellulose along with plasticizer dibuthyl sebacate. The release of indapamide depended on the type of Eudragit such as RS and NE 30 D used in the formulation controlled release layer. These results obtained clearly suggest that the sustained release oral delivery system for indapamide could be designed with satisfying drug release profile approved.

• Journal of Pharmaceutical Investigation
• /
• 제33권3호
• /
• pp.179-185
• /
• 2003

Melatonin (MT) is an indole amide pineal hormone. It has not only very short half-life but also pH-sensitive property. The sustained release dosage form which delivers MT in a circadian fashion over 8 h is clinical value. The purpose of this study is to prepare sugar beads using multiple coating methods and enteric-coated in a sustained release to evaluate in vitro release characteristics in simulated gastric and intestinal fluids. The $Eudragit^{\circledR}$ as a polymer, sustained release membrane, and triethylcitrate (TEC) as a plasticzer were used. Multi-coated melatonin delivery system was composed of sugar, various excipients, $Eudragit^{\circledR}$ and enteric materials (e.g. hydroxy propyl methyl cellulose phthalate, HPMCP), and prepared by fluid bed coater. The dissolution test was carried out using the basket method at a stirring speed of 100 rpm at $37^{\circ}C$ in simulated gastric (pH 1.2) and intestinal fluid (pH 7.4). The released amount of MT was determined by High performance liquid chromatography method. The morhologies of surface and cross section of multi-coated beads were observed by scanning electron microscope. Size of multi-coated sugar beads was ranged over $1000{\sim}1300\;{\mu}m$. The release rate of MT from coated beads was limited in simulated gastric fluid (pH 1.2), but it was sustained in intestinal fluid (pH 7.4) during $3{\sim}8$ hours. The MT beads may provide small-intestine-targeted device for oral delivery. Studies on animal and relative experiment are in process.