• 제어로봇시스템학회논문지
• /
• 제12권12호
• /
• pp.1191-1196
• /
• 2006

In this work the kinetics of volume changes of fluid spaces associated with infusion of Ringer's solution are analyzed using the body fluid space model. During infusion of Ringer's solution, the human body is assumed to be characterized by the fluid space model into which fluid is fed and from which fluid is left. Various infusion types were tested to accommodate different medical situations. Volunteers were given Ringer's solution and the changes in blood hemoglobin were detected. From the comparison with experimental data, the single- and two-fluid space models were found to represent adequately the kinetics of human volume expansion during infusion of Ringer's solution.

• 한국산업융합학회 논문집
• /
• 제25권3호
• /
• pp.443-449
• /
• 2022

In this study, in order to improve the disadvantages of the environmental error of the infusion set that performs infusion therapy in the existing clinical practice and to maximize the user's convenience by miniaturizing the existing infusion pump system, the structure of the muscle pump of the human vein was imitated. As a double check valve method, a method for preventing the backflow of fluid and discharging a constant fluid in one direction by external pressure was proposed. The proposed bio-mimic muscle pump uses a check valve that controls the flow of fluid in one direction and a silicone tube with elasticity, and a chamber is constructed. A peristaltic pump for applying intermittent pressure to the tube chamber was constructed using a multi-cam structure roller. In order to verify the performance of the proposed pump, optimization was performed while changing the number of multi-cam rollers and adjusting the speed of the roller driving motor, and the reproducibility of the instantaneous discharge amount and the continuous discharge amount of the pump was compared and tested. The performance of the muscle pump proposed in this study was verified through experiments that it can inject up to 1L of fluid within 12 hours, and that it is possible to inject the fluid with an accuracy of ±0.1ml. Real-time monitoring of the fluid injection volume through the bio-mimic muscle pump proposed in this study not only increases the convenience of the administrator, but also provides a precise fluid administration environment to more patients at a low cost, and additionally applies bubble detection and occlusion detection technology If so, it is believed that a safer medical environment can be provided to patients.

• Journal of Trauma and Injury
• /
• 제27권2호
• /
• pp.20-24
• /
• 2014

Purpose: The temperature of a warm fluid infused into a patient is lowered because the line that allows the fluid to be infused into the patient is exposed to room air. This study evaluated the effects of aluminum foil used as an insulator surrounding the fluid infusion lines when using warm crystalloid fluids to treat traumatic shock patients. Methods: The study measured the differences in fluid temperature between infusion lines with and without the aluminum-foil insulation. We used 1L of normal saline at $40^{\circ}C$ as the infusion fluid, and the fluid infusion line was 200 cm long. The differences in temperature were measured for various fluid flow rates from 12,000 mL/min to 100 mL/min. We performed three experiments at each flow rate. Results: The results showed the differences in temperature between the groups with and without the aluminum insulation were significant for flow rates above 100 mL/min. Conclusion: Hypothermia in trauma patients results in many adverse complications such as peripheral vascular constriction, tissue hypoxia, metabolic acidosis, heart dysfunction and so on. Thus, the use of warm fluids and blood components is essential to reduce the probability of hypothermia. This study showed the aluminum foil wrapped around the infusion line had an insulator effect. As a result, such a wrapping can be used to avoid the adverse effects of hypothermia.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1998년도 추계학술대회
• /
• pp.127-128
• /
• 1998

It is necessary to maintain constant intravenous (IV) infusion rate. While infusion pump is able to control infusion rate with great accuracy, its rather large size and weight make it difficult for patients to move around. The most commonly used infusion device is gravity IV infusion set with its administration chamber being clamped according to the observed drip rate. In this case it may be easier and more accurate to maintain IV rate to given value if we automate the drip-counting process and tube-clamping work by electronic devices. We calculated volume infusion rate of specific fluid using optical drip rate meter which we had developed. To regulate fluid flow rate, we equipped the rate meter which we had developed with a miniaturized clamping apparatus using DC motor. Also, we Implemented drip detection and clamp control algorithm with PIC16C73 $\mu$-controller (Microchip). This system provides user interface through LCD display and key buttons.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2012년도 춘계학술대회 논문집
• /
• pp.857-858
• /
• 2012

• Journal of Trauma and Injury
• /
• 제26권4호
• /
• pp.255-260
• /
• 2013

Purpose: For the treat hypothermia patients, active warming might be needed. In most emergency departments, IV warm saline infusion is used for treatments. However, during IV warm saline infusion, heat loss from the warm saline may occur and aggravate hypothermia. Thus, in this study, we conducted an experiment on conserving heat loss from warm saline by using a simple method. Methods: Four insulation methods were used for this study. 1) wrapping the set tube for the administration of the IV fluid with a cotton bandage, 2) wrapping the set tube for the administration of the IV fluid with a cotton bandage with aluminum foil, 3) wrapping the warm saline bag and tube with a cotton bandage, and 4) wrapping the warm saline bag and tube with a cotton bandage with aluminum foil. Intravenous fluid was preheated to a temperature between $38-40^{\circ}C$. The temperatures of the saline bag temperature and the distal end of the IV administration set were measured every ten minutes for an hour. The infusion rate was 1000 cc/hr, and to obtain an accurate infusion rate, we used an infusion pump. Results: The mean initial temperature of the saline bag was $39.11^{\circ}C$. An hour later, the fluid temperature at the distal end of the fluid temperature ranged from $39.11^{\circ}C$ to $34.3^{\circ}C$. Without any insulation, the initial temperature of the pre-heated warm saline, $39^{\circ}$ had decreased to $34.8^{\circ}C$ after having been run through the 170-cm-long IV administration tube, and after 1-hour, the temperature was $29.63^{\circ}C$. As we expected, heat loss was prevented most by wrapping both the saline bag and the IV administration set with a cotton bandage and aluminum foil. Conclusion: Wrapping both the saline bag and the IV administration set with a cotton bandage and aluminum foil can prevent heat loss during IV infusion in Emergency departments.

• Journal of Yeungnam Medical Science
• /
• 제37권1호
• /
• pp.67-72
• /
• 2020

Whole lung lavage (WLL) is a therapeutic procedure to remove accumulated material by infusing and draining the lungs with lavage fluid. This procedure has been regarded as the current standard of care to treat pulmonary alveolar proteinosis. However, the WLL protocol has not yet been standardized and the technique has been refined and modified a number of times. A rapid infusion system is a device used to infuse blood or other fluids at precise rates and normothermic conditions. This device is not typically used in WLL, which relies on the passive infusion of fluids using the gravitational force. However, in this study we performed WLL using a rapid infusion system, since we aimed to take advantage of its shorter operation time and greater degree of control over fluid volume and temperature. The patient's symptoms improved without the occurrence of any complications.

• 한국유체기계학회 논문집
• /
• 제11권1호
• /
• pp.40-45
• /
• 2008

This paper proposes a tube pump composed of small-sized cams and followers for an implantable intrathecal drug infusion device. Each followers is driven by a cam and liquid is discharged by a sequential reciprocal motion of the followers. The advantage of this structure is that it allows the pump to be clean and valveless. To design a small-sized, low power pump some analysis were performed to determine the design parameters of the cam, follower and the tube. To verify the feasibility of the experiment, a prototype was manufactured and its operating characteristics were investigated. Experimental results were in accordance with the expected results obtained from analysis.

• Asian-Australasian Journal of Animal Sciences
• /
• 제14권1호
• /
• pp.35-40
• /
• 2001

The physiological role of brain neuropeptide Y (NPY) in the central regulation of grass intake in sheep was investigated through a continuous intracerebroventricular (ICV) infusion of NPY at a dose of $5{\mu}g/0.2ml/hr$ for 98.5 hours from day 1 to day 5. Sheep (n=5) were fed for 2 hours once a day, and water and 0.5 M NaCl solution were given ad libitum. Feed intake during ICV NPY infusion increased significantly compared to that during ICV artificial cerebrospinal fluid (CSF) infusion. Water and NaCl intake during ICV NPY infusion remained unchanged. Mean arterial blood pressure (MAP) and plasma osmolality during ICV NPY infusion were not significantly different from those during ICV CSF infusion. On the other hand, plasma glucose concentration during ICV NPY infusion increased significantly compared to that during ICV CSF infusion. The results suggest that brain NPY acts as a hunger factor in brain mechanisms controlling feeding to increase grass intake in sheep.

• The Korean Journal of Physiology and Pharmacology
• /
• 제7권4호
• /
• pp.217-221
• /
• 2003

To clarify the roles of gonadal steroids on pancreatic exocrine secretion, effects of progesterone and estradiol-$17{\beta}$ on spontaneous and secretagogue-induced exocrine response of isolated perfused rat pancreas were investigated. Intra-arterial infusion of progesterone resulted in significant increase of the spontaneous pancreatic fluid and amylase secretion dose-dependently. However, estradiol-$17{\beta}$ did not exert any influence on spontaneous pancreatic exocrine secretion. Exogenous secretin, cholecystokinin (CCK), and acetylcholine markedly stimulated pancreatic fluid and amylase secretion. Progesterone initially enhanced secretin-induced amylase secretion, but this stimulatory response declined thereafter to basal value. Moreover, secretin-induced fluid secretion was not affected by infusion of progesterone. Therefore, initial increase of secretion-induced amylase secretion by progesterone seems to be a non-specific action by washout effect of secretin. Estradiol-$17{\beta}$ failed to change the secretin-induced fluid and amylase secretion. Both progesterone and estradiol-$17{\beta}$ did not exert any influence on CCK-induced fluid and amylase secretion. Acetylcholine-induced exocrine secretion of isolated perfused pancreas also was not affected by intra-arterial infusion of progesterone or estradiol-$17{\beta}$. It is concluded from the above results that progesterone could enhance the spontaneous pancreatic fluid and amylase secretion of isolated perfused rat pancreas through non-genomic shortterm action, and that these effects could be masked by more potent stimulants such as secretin, CCK, and acetylcholine.