• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.242-250
• /
• 2010

For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2828-2833
• /
• 2008

Water management is one of many operating parameters, which influences the performance and stability of a proton exchange membrane fuel cell (PEMFC). Local humidity condition including liquid water saturation has profound impacts on the distributions of overpotentials, current density, and membrane water content. Computational fluid dynamics simulations were conducted to investigate the effect of the inlet humidity variation on the performance of a PEMFC of $9\;cm^2$ active cell area with serpentine flow fields. The results showed that the performance of the simulated PEMFC remained at an almost same level when the cathode inlet humidity was changed from 100% to 60%, while reaching its maximum at air humidity of 80%. However, further decrease in the cathode inlet humidity below 40% started to significantly deteriorate the performance of the PEMFC. The variations of overpotentials, membrane water content, etc. due to the change in the cathode inlet humidity were also discussed.

• Animal cells and systems
• /
• 제7권2호
• /
• pp.169-171
• /
• 2003

Sodium, potassium, calcium, zinc and magnesium levels in the serum of 31 patients diagnosed as acute myocardial infarction were analyzed on admission (within 24 Hours) and after 48 hours. The results were compared with those of 26 age matched controls. No significant difference was observed in the mean sodium, potassium, calcium and zinc levels between the cases and controls. Compared to the controls, however, the variation in the level of magnesium is highly significant at the time of admission as well as after 48 hours. When the risk factors like diabetes mellitus, hypertension, smoking and alcohol were considered, it is found that there is no significant difference between the risk groups as well as between the patients. The alteration in magnesium level in acute myocardial infarction is independent of these risk factors. Within the first 24 hours, the significant decrease in serum magnesium (35-51％ fall when compared with the control group), correlates with its entry into the cell following ischemia. From this hypomagnesemic state, it rises to 9-22 times after 48 hours. This hyper-magnesemia after 45 hours is probably due to the shift of magnesuim from the intracellular fluid compartment to the extracellular fluid compartment that follows cellular recovery. Therefore, including magnesium in the immediate management of acute myocardial infarction will be beneficial in the early recovery.

• 디지털융복합연구
• /
• 제19권5호
• /
• pp.279-284
• /
• 2021

본 연구에서는 3차원 전산유체역학 (3-D computational fluid dynamics, CFD)을 이용하여 고체고분자전해질형연료전지 (proton exchange membrane fuel cell, PEMFC)의 기체유로에 대한 성능에 관한 전산모사를 실시하였다. 또한 이 전산모사를 통하여 유체의 농도와 압력분포, 그리고 전류밀도의 분포 등 각종 분포에 관하여 연구를 진행하였다. 본 논문에서는 단일유로와 5개의 유로를 비교분석 하였다. 그 결과 5개의 유로가 단일유로에 비하여 각종 분포들이 균일하였고, 성능 또한 월등하였다. 특히 단일유로에서는 물질전달에의한 성능저하 영역에서 매우 낮은 성능을 확인할 수 있었고 반면 5개의 유로에서는 이 부분을 극복하여 보다 높은 성능을 확인할 수 있었다.

• Corrosion Science and Technology
• /
• 제23권3호
• /
• pp.203-214
• /
• 2024

A heat exchanger is a device designed to transfer heat between two or more fluids. In a vehicle's thermal management system, Al heat exchangers play a critical role in controlling and managing heat for efficient and safe operation of the engine and other components. The fluid used to prevent heat exchangers from overheating the engine is mostly tap water. Heat exchange performance can be maintained at sub-zero temperatures using a solution mixed with antifreeze. Although the fluid flowing through the heat exchanger can reduce the temperature inside the engine, it also has various problems such as cavitation corrosion. Cavitation corrosion characteristics in tap water and corrosion characteristics were evaluated in this study when antifreeze was added for test specimens where AA4045 was cladded on the inner surface of AA3003 tubes of a fin-type heat exchanger. The cavitation corrosion resistance of AA3003 was found to be superior to that of AA4045 regardless of the test solution due to higher corrosion resistance and hardness of AA3003 than those of AA4045. The cavitation corrosion rate of Al alloys increased with the addition of antifreeze.

• 설비공학논문집
• /
• 제9권2호
• /
• pp.171-179
• /
• 1997

During the day time in summer, peak of air conditing load, and electric power management system lies under overloaded condition. The reason is the enlarged peak load value of electric power caused by increased air-cooling load in summer. To prevent load concentration during day time and overloaded condition of power management system, some energy storage methods are suggested. One of these methods is ice storage system. Water has some good properties as P.C.M.(Phase Chang Material) : Its melting point is the range of required operation temperature. It has large specific latent heat and is chemically stable compared to other organic or inorganic substances. It is cheap and easy to treat. This study represents experimental results of heat transfer characteristics of P.C.M. under the outward melting process in a vertical cylinder. We experimented with twelve combinations of conditions, i.e., three different inlet temperatures($7^{\circ}C,\;4^{\circ}C\;and\;1^{\circ}C$), two working fluid directions(upward and downward), and two aspect ratios, H/R(4 and 2). At the inlet temperature of $7^{\circ}C$ and $4^{\circ}C$, there was temperature stagnation region where the temperature of P.C.M. remains constant at $4^{\circ}C$ regardless of aspect ratio and direction of working fluid. This temperature stagnation occurs as the water, at its maximum density, flows down to the lower region. The phase change interface formed bell-shaped curve as the melting process continued. With a new set of conditions(4H/R, inlet temperature $4^{\circ}C$ and $1^{\circ}C$, downward/upwerd inlet direction), the movement of phase change interface was faster when the working flued inlet direction was downward. With the same set of conditions, melting rate and total melting energy were larger when the working fluid inlet direction was downward. The results were reversed when the other sets of conditions were applied.

• 환경영향평가
• /
• 제10권4호
• /
• pp.319-326
• /
• 2001

This study is aimed at the development of a comprehensive web-based partial differential equation solver (WPDES) using multidimensional finite element method, which can be operated on the basis of world wide web. Overall issues of engineering and environmental information management and facility control could be implemented using this solver. This paper describes the development technique of the model, which is first part on development of partial differential equation solver. Conventional commercial general solver of computational fluid dynamics problems were investigated. All the relevant environmental models were analyzed to develop integrated environmental management system using WPDES. The governing equations and the parameters of investigated models were analyzed and integrated. Several numerical modules were invented for each partial differential term in partial differential equation of many related modeling problems. Each module was coded in the fashion of object oriented method, and was combined independently for the overall governing equation. WPDES has unique characteristic, which can analyze the problem through the suitable combination of modules without development of additional models for each environment problem with different governing equation, main variables, and parameters.

• Parasites, Hosts and Diseases
• /
• 제52권5호
• /
• pp.521-525
• /
• 2014

Human infections with Lophomonas blattarum are rare. However, the majority of the infections occurred in China, 94.4% (136 cases) of all cases in the world. This infection is difficult to differentiate from other pulmonary infections with similar symptoms. Here we reported a case of L. blattarum infection confirmed by bronchoalveolar lavage fluid smear on the microscopic observations. The patient was a 21-year-old female college student. The previous case which occurred in Chongqing was 20 years ago. We briefly reviewed on this infection reported in the world during the recent 20 years. The epidemiological characteristics, possible diagnostic basis, and treatment of this disease is discussed in order to provide a better understanding of recognition, diagnosis, and treatment of L. blattarum infection.

• 한국수산과학회지
• /
• 제43권4호
• /
• pp.380-385
• /
• 2010

Several theoretical acoustic scattering models were applied to estimate the target strength (TS) for assessing the biomass of zooplankton, to overcome the difficulty of direct measurements. Acoustical scattering characteristics of copepods were estimated using three theoretical models, and the application of the models was evaluated for four frequencies of a scientific echo sounder. The scattering directivity by the body shapes of copepods at 200 kHz and 420 kHz was significantly affected by TS patterns. Averaged TS, however, were similar at higher frequencies. Consequently, a low frequency model, such as a truncated fluid sphere model, provides a good acoustical biomass estimation. The regressions of TS and 30 logL were < $TS_{200\;kHz}$ >= 30logL-118.4 ($R^2=0.716$) and < $TS_{420 kHz}$ > =30 logL-108.8 ($R^2=0.758$), respectively.

• 동서간호학연구지
• /
• 제17권1호
• /
• pp.57-65
• /
• 2011

Purpose: The purpose of this study was to determine actual state and risk of constipation in the institutionalized elderly. Methods: A descriptive design was used with convenience sampling of 365 institutionalized elderly. Data were collected using a structured questionnaire. Results: 1) The constipation rate was 29.3%, the elderly had irregular bowel habit was 73.7%. 2) The 25.2% of the elderly was administrated laxatives. 3) High risk of constipation was 1.1%, moderate risk was 15.1%, and mild risk was 44.2% respectively 4) Risk of constipation showed significantly differences according to age, admission periods and daily fluid intake. 5) State of mobility, long-term care classification, gender, digestants and type of diet were explained 63% of risk of constipation. Conclusion: The institutionalized elderly showed a tendency toward high risk of constipation. So, effective management and application of nonpharmacologic therapy for constipation in the institutionalized elderly was needed.