• International Journal of Naval Architecture and Ocean Engineering
• /
• 제13권1호
• /
• pp.102-114
• /
• 2021

Biofouling represents an important problem in the shipping industry since it causes the increase in surface roughness. The most of ships in the current world fleet do not have good coating condition which represents an important problem due to strict rules regarding ship energy efficiency. Therefore, the importance of the control and management of the hull and propeller fouling is highlighted by the International Maritime Organization and the maintenance schedule optimization became valuable energy saving measure. For adequate implementation of this measure, the accurate prediction of the effects of biofouling on the hydrodynamic characteristics is required. Although computational fluid dynamics approach, based on the modified wall function approach, has imposed itself as one of the most promising tools for this prediction, it requires significant computational time. However, during the maintenance schedule optimization, it is important to rapidly predict the effect of biofouling on the ship hydrodynamic performance. In this paper, the effect of biofilm on the ship hydrodynamic performance is studied using the proposed performance prediction method for three merchant ships. The applicability of this method in the assessment of the effect of biofilm on the ship hydrodynamic performance is demonstrated by comparison of the obtained results using the proposed performance prediction method and computational fluid dynamics approach. The comparison has shown that the highest relative deviation is lower than 4.2% for all propulsion characteristics, lower than 1.5% for propeller rotation rate and lower than 5.2% for delivered power. Thus, a practical tool for the estimation of the effect of biofouling with lower fouling severity on the ship hydrodynamic performance is developed.

• 대한임상검사과학회지
• /
• 제54권3호
• /
• pp.167-172
• /
• 2022

In clinical practice, the diagnosis of tuberculosis (TB) continues to be a challenge. The goal of this study was to evaluate the reliability and impact of adenosine deaminase (ADA) enzyme testing as a biochemical marker in the continued management of suspected tuberculosis in a limited resource setting hospital. The retrospective data were collected from 2018 to 2021 and comprised the results of all ADA test assays done in the laboratory. All types of body fluids received for ADA testing were analyzed. Over the course of two years, 1461 samples for ADA assay testing were received. The average age of the study population was 56.69±11.7 years, with males accounting for the majority of the subjects (55.72%). Pleural fluid (N=817, 55.92%) was the most common type of sample received for the ADA assay. 114 (13.95%) of the 817 pleural fluid samples were found to be positive. A survey was conducted to obtain physician's response regarding reliability on ADA testing. 100% of them reported the supportive role of ADA levels in the workup of patients with suspected tuberculosis. In a limited resource setting, the ADA test, in conjunction with clinical and other laboratory findings, can help physicians to initiate early treatment in hospitals for the benefit of patients.

• 수산해양기술연구
• /
• 제59권2호
• /
• pp.164-171
• /
• 2023

This study analyzed the flow inside floating seedling equipment for Scapharca subcrenata. Due to the aging society of fishing villages, it is impossible to continuously input the labor force. Therefore, it is necessary to improve efficiency. Scapharca subcrenata has high per capita consumption. It serves as an important aquatic food resource. Scapharca subcrenata culture tends to be highly dependent on the natural environment. Production of Scapharca subcrenata is difficult to predict with low stability. In the past, manpower directly installed bamboo nets in mudflats. The seedling equipment devised in this study is a floating type and can be freely moved on the sea according to the prediction of Scapharca subcrenata generation. The flow around the floating seedling equipment was analyzed by numerical analysis. The physical phenomena of the flow around the net inside the floating seedling equipment were visualized. As a result, the space between the floating seedling equipment and the bottom net and the space between the net groups showed a lower flow rate than the inlet flow rate. It is expected that the low flow rate of the floating seedling equipment will have a positive effect on the attachment of Scapharca subcrenata.

• Nuclear Engineering and Technology
• /
• 제56권1호
• /
• pp.9-18
• /
• 2024

In-vessel retention through external reactor vessel cooling (IVR-ERVC) is a severe accident management (SAM) strategy that has been adopted and used in many nuclear reactors such as AP1000, APR1400, and light water reactor etc. Some reactor accidents have raised concerns about nuclear reactors among residents, leading to a decrease in residents' acceptability and many studies on SAM are being conducted. Experiments on IVR-ERVC are almost impossible due to its specificity, so fluid characteristics are analyzed through BALI experiments with similar condition. In this study, computational fluid dynamics (CFD) via Reynolds-averaged Navier-Stokes (RANS) and large eddy simulation (LES) for BALI experiments were performed. Steady-state CFD analysis was performed on three turbulence models, and SST k-ω model was in good agreement with the experimental measurement temperature within the maximum error range of 1.9%. LES CFD analysis was performed based on the RANS analysis results and it was confirmed that the temperature and wall heat flux for depth was consistent within an error range of 1.0% with BALI experiment. The LES CFD analysis results were compared with those of the Lagrangian-based solver. LES matched the temperature distribution better than SOPHIA, but SOPHIA calculated the position of boundary between stratified layer and convective layer more accurately. On the other hand, Lagrangian-based solver predicted several small eddy behaviors of the convective layer and LES predicted large vortex behavior. The vibration characteristics near the cooling part of the BALI experimental device were confirmed through Fast Fourier Transform (FFT) investigation. It was found that the power spectral density for pressure at least 10 times higher near the side cooling than near the top cooling.

• 동력기계공학회지
• /
• 제16권1호
• /
• pp.12-18
• /
• 2012

The fluid performance is one of the key design factors considered during the development of torque converters especially at conceptual design stages. Therefore the design environment that allows an easy access to legacy data of fluid performance could be critical to reduce the design life cycle as well as to increase the performance of the torque converter. In this paper we present a computer-based system that enables designers to utilize massive legacy data for their design of torque converters. For the implementation of the system we propose a standard format for the legacy data and build them into the database to be efficiently shared by designers in the company. Also we provide numerous analysis tools in the system that allow, for example, database management, data viewing and document generation for search, analysis and reporting. In the paper the implementation of the system is introduced in detail with its effective user interface.

• Structural Engineering and Mechanics
• /
• 제34권4호
• /
• pp.449-474
• /
• 2010

A smart hollow cylinder consisting of a host functionally graded elastic core layer and two surface homogeneous piezoelectric layers is presented in this paper. The bonding between the layers can be perfect or imperfect, depending on the parameters taken in the general linear spring-layer interface model. The effect of such weak interfaces on free vibration and steady-state response is then investigated. Piezoelectric layers at inner and outer surfaces are polarized axially or radially and act as a sensor and an actuator respectively. For a simply supported condition, the state equations with non-constant coefficients are obtained directly from the formulations of elasticity/piezoelasticity. An approximate laminated model is then introduced for the sake of solving the state equations conveniently. It is further assumed that the hollow cylinder is embedded in an elastic medium and is simultaneously filled with compressible fluid. The interaction between the structure and its surrounding media is taken into account. Numerical examples are finally given with discussions on the effect of some related parameters.

• Asian-Australasian Journal of Animal Sciences
• /
• 제16권9호
• /
• pp.1280-1284
• /
• 2003

The number of protozoa and VFA content in the rumen fluid, in situ disappearance and turnover rate were examined with four rumen-fistulated cattle given either sugarcane stalk or Ruzi grass hay in order to clarify the manner of rumen digestion of sugarcane stalk. Cattle were given either sugarcane stalk or Ruzi grass hay at 1.0% of body weight level with commercial concentrate feed. Feeding sugarcane stalk reduced acetate content and increased propionate and butyrate contents in rumen fluid. While rapidlysoluble fraction of sugarcane stalk was 42%, the insoluble but potentially degradable fraction was only 17%. This clearly showed that sugarcane stalk mainly consisted of water soluble fraction (i.e. sugar) and tough fiber (i.e. bagasse). The ruminal degradation rate of both Ruzi grass hay and sugarcane stalk was lower in the animal given sugarcane stalk in comparison with those given Ruzi grass hay. While the turnover rate of liquid phase was about 50% higher in the animals given sugarcane stalk than in the animals given Ruzi grass hay, that of the solid phase was about 40% lower in the animals given sugarcane stalk. The effective degradability of DM of sugarcane stalk was higher than that of Ruzi grass hay. Sugarcane would be a promising roughage for ruminants in the tropics especially, in the dry season.

• 한국물환경학회지
• /
• 제28권3호
• /
• pp.384-393
• /
• 2012

Saemangeum lake is an artificial lake created by reclamation works and an estuary embankment since 2006. The sea water flows into the lake by the operation of two sluice gates, and the freshwater enters into the lake by the upper streams. For the reflection of hydrology and hydrodynamics effects in Saemangeum area, a hydrodynamics model was developed by connecting Hydrological Simulation Program with Fortran (HSPF) and Environmental Fluid Dynamic Code (EFDC). The HSPF was applied to simulate the freshwater discharge from the upper steam watershed, and the EFDC was performed to compute water flow, water temperature, and salinity based on time series from 2008 to 2009. The calibration and validation are performed to analyze horizontal and vertical gradients. The horizontal trend of model simulation results is reflected in the trend of observed data tolerably. The vertical trend is conducted an analysis of seasonal comparisons because of the limitation of vertically observed data. Water temperature reflects on the seasonal changes. Salinity has an effect on the near river input spots. The impact area of salinity is depending on the sea water distribution by gate operation, mainly.

• International Journal of Aeronautical and Space Sciences
• /
• 제16권1호
• /
• pp.41-49
• /
• 2015

Analysis and test of hydrodynamic ram in welded metallic tanks containing water were performed to investigate the phenomena and to understand the effects on the resulting structural behavior. Arbitrary Lagrange-Euler coupling method was used for the analysis of the fluid-structure interaction occurring in the hydrodynamic ram, where the projectile, tank, and water are exchanging load, momentum, and energy during the traveling of the projectile through the water of the tank. For a better representation of the physical phenomena, modeling of the welded edges is added to the analysis to simulate the earlier weld line fracture and its influence on the resulting hydrodynamic ram behavior. Corresponding hydrodynamic tests were performed in a modified gas gun facility, and the following panel-based examinations of various parameters, such as displacement, velocity, stress, and energy, as well as hydrodynamic ram pressure show that the analysis and test are well correlated, and thus the results of the study reasonably explain the characteristics of the hydrodynamic ram. The methodology and procedures of the present study are applicable to the hydrodynamic ram assessment of airframe survivability design concepts.

• Industrial Engineering and Management Systems
• /
• 제9권3호
• /
• pp.242-250
• /
• 2010

For economical and environmental reasons, the aim of this research is hence to monitor the cutting conditions with the dry cutting, the wet cutting, and the mist cutting to obtain the proper cutting condition for the plain carbon steel with the ball end milling based on the consideration of the surface roughness of the machined parts, the life of the cutting tools, the use of the cutting fluids, the density of the particles of cutting fluids dispersed in the working area, and the cost of cutting. The experimentally obtained results of the relation between tool wear and surface roughness, the relation between tool wear and cutting force, and the relation between cutting force and surface roughness are correspondent with the same trend. The phenomena of surface roughness and tool wear can be explained by the in-process cutting forces. The models of the tool wear with the cutting conditions and the cutting times are proposed to estimate the tool cost for the different cooling strategies based on the experimental data using the multiple regression technique. The cutting cost is calculated from the costs of cutting tool and cutting fluid. The mist cutting gives the lowest cutting cost as compared to others. The experimentally obtained proper cutting condition is determined based on the experimental results referring to the criteria.