• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.488-491
• /
• 2004

Numerical analysis of the three dimensional turbulent flow field in a complex valve shape is carried out to confirm the flow field whether the designed valve shape is good or not. The simulation of the incompressible flow in a constant flowrate control valve is performed by using the commercial code, FLUENT/UNS 6.0. The results of flow field show the designed valve has some problems, therefore these will be good data for new valve design.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1989년도 한국자동제어학술회의논문집; Seoul, Korea; 27-28 Oct. 1989
• /
• pp.749-754
• /
• 1989

This paper describes a remote measurement method for estimating unsteady flowrate through a pipeline. By this method, instantaneous flowrate at the remote location along a pipeline (distance L) from flowmeters is measured by making use of dynamic characteristics between two cross sections of the circular pipeline. Using this method, instantaneous flowrate is accurately measured at a location where it is difficult to setup flowmeters. The estimated flowrate waveforms by the method are compared with directly measured ones by cylindrical choke-type instantaneous flowmeter. The validity of the method is established.

• 대한토목학회논문집
• /
• 제33권5호
• /
• pp.1841-1850
• /
• 2013

4대강에 설치된 16개의 다기능보에는 횡단구조물의 건설로 인한 생태계의 악영향을 최소화하기 위해 다양한 형태의 어도가 설치되어 있다. 달성보에 설치된 아이스 하버식 인공형 어도는 상류측에 가동보를 설치하여 하천유량에 상관없이 어도 내로 일정한 양을 통수시킬 수 있다. 어도의 유입유량은 내부의 수리적 특성과 밀접한 관계가 있으며, 이는 어류의 이동효율에 영향을 준다. 그러므로 어도의 이동효율을 효율적으로 관리하기 위하여 최적 유입유량 등의 다기능보 운영조건을 산정하는 것이 매우 중요하다. 본 연구에서는 낙동강 달성보의 아이스하버식 인공형 어도를 대상으로 FLOW-3D 모형을 이용하여 유량에 따른 수리특성과 이동효율을 분석하였고, 이동효율을 고려한 최적의 어도 가동보 유량 조건을 제시하였다.

• 상하수도학회지
• /
• 제22권1호
• /
• pp.49-63
• /
• 2008

The objectives of this research were to evaluate the pressurized/the main inlet water flowrate ratio which have been used as the most important parameter for operating the pump diffusion mixer until now, to suggest the alternative operating parameter and the relating criteria if the flowrate ratio was not inadequate. For the objectives of this research, computational fluid dynamics (CFD) simulation was conducted for 21 cases of flowrate ratio in full-scaled pump diffusion mixer. From the results of CFD simulation, the local velocity gradient values were calculated in each case in order to analyze the simulation results in more detail. For verifying CFD simulation, wet test was conducted. The wet test was to measure the factual coagulant dispersion distribution at a distance of 5.4m from deflector. From both results of CFD simulation and wet test, flowrate ratio was inadequate as operating parameter or criteria, on the other hand the pressurized/the main inlet velocity ratio(dimensionless) was useful in predicting the performance of pump diffusion mixer. Also, the injected coagulant could be dispersed evenly in overall cross section on the condition that pressurized/the main inlet velocity ratio(dimensionless) is over at least 20.

• 한국자동차공학회논문집
• /
• 제16권4호
• /
• pp.88-96
• /
• 2008

Effects of the duct inlet guide vane on the flowrate distribution characteristics of the defroster nozzle exit in a defrost duct system were investigated experimentally to design the optimum heating, ventilation and air conditioning (HVAC) system applied in an automotive compartment. A 3-dimensional hot-wire anemometer system was used to measure the velocity field in the vicinity of the defroster nozzle jet flow and the velocity distributions near the windshield interior surface. At first, two cases of with- and without-duct inlet guide vanes were considered as the test condition, and then three cases of the duct inlet guide vane were tested to determine the optimum guide vane shape and their positions. The arrangement of the duct inlet guide vanes has an effect on the improved flowrate distribution at the defroster nozzle exit and near the windshield interior surface. However, the application of the lots of guide vane to control the flow direction leads to increase the flow resistance, resulting in the decreased flowrate issuing from the defroster nozzle. The shape of the duct inlet guide vane affects not only the flowrate distribution between the driver side and the assistant driver side but also the reduction of the flow resistance in the defrost duct system.

• 물과 미래
• /
• 제28권3호
• /
• pp.197-204
• /
• 1995

인구의 도시집중으로 인하여 유역의 유출용적이 증대하며 이로 인한 합류부의 수위상승으로 내수배제가 불가능하게 되어 침수피해가 발생하고 있다. 본 실험연구에서는 소유역 하천에서 우수거의 합류로 인한 본류하천의 흐름변화를 실험하였으며, 하천의 수위상승을 소하천(본류)의 유량과 경사, 우수거(지류)의 유량과 경사 및 합류각에 따른 본류의 수위상승을 분석하였다. 실험결과 본류하천의 경사에 대해서는 경사가 급할수록 수심비가 증대하는 것으로 나타났으며, 본류의 유량은 적을수록, 지류의 유량은 많을 수록 수심비는 크게 나타났다. 합류각에 대해서는 합류각이 작을수록 수심비가 작은값을 나타내고 있다. 이와 같이 도시 소하천의 합류시 수심비의 상승영향을 보면 합류각, 지류유량 및 본류유량 등의 순으로 상승영향이 밀접하게 나타났다.

• 한국화재소방학회논문지
• /
• 제17권4호
• /
• pp.105-110
• /
• 2003

II부에서는 I부에서 3가지 기계제연방식 중에서 가장제연성능이 우수한 것으로 나타난 배기방식의 풍량 0.6∼2.4 ㎥/s와 두 화재크기 200 ㎾와 2 ㎿에 대한 공간내 온도와 연기입자의 분포를 조사하였다. I 부와 동일한 수치법을 동일한 계산영역에 적용한 결과, 배기풍량은 제연성능에 큰 영향을 미치는 것으로 나타났고, 두 화재크기에서 풍량의 증가가 제연성능을 개선하는 비슷한 경향을 보였다. 주어진 조건에서 대피로의 온도를 $60^{\circ}C$ 이하로 유지하기 위해서는 2.4 ㎥/s 이상의 배기풍량이 필요함을 알 수 있었다.

• 한국환경과학회지
• /
• 제6권5호
• /
• pp.417-423
• /
• 1997

The objective of this study Is to supply basic data for large reservoir sedimentation research In future and make suggestions to maintain and opera능 the reservoir more of efficiently. At first, previous studios about the estimation of sediment yield rate were reviewed in Korea. And the discharge rating curves of upstream stage gauging stations and the correlation between dam Inflow and stage discharge were analyzed. With the analysis results, the spec유c sediment rate of Soyanggang dam was estimated as 608 m3/km2/yr. It was similar to that of Soyanggang dam feasibility study and 1994's field surveys of the reservoir than that of 1983's field surveys. Because the sediment rating curves were derived under the low discharge conditions, It needs to be checked under the flood conditions. However, the suggested methods such as flowrate analysis and sediment estimation will be useful to the sediment studios In future. Key words . reservoir sediment, sediment yield rate, rating curve, flowrate analysis.

• Korean Journal of Hydrosciences
• /
• 제3권
• /
• pp.81-96
• /
• 1992

This study represents the methodology for feasibility analysis of small hydro power SHP plant. Cumulative density function of Weibull distribution and Thiessen method were adopted to decide flow duration curve at SHP candidate site. The perfomance prediction model and construction cost estimation model for tunnel-type SHP plant were developed. Eight tunnel -type SHP candidate sites existing on Han-river were selected and surveyed for actual site reconnaissance. The performance characteristics and economical feasibility for these sites were analyzed by using developed models. As a result, it was found that the optimum design flowrate with the lowest unit generation cost for tunel-type SHP candidate site were the flowrate concerming with between 20% and 30% of time ratio on the flow duration curve. Additionally, primary design specifications such as design flowrate, effective head, capacity, annual averageload factor, annual electricity production were estimated and discussed for eight surveyed SHP candidate sites.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2004년도 유체기계 연구개발 발표회 논문집
• /
• pp.329-336
• /
• 2004

The lock-up position of the floating ring seal affects the leakage flowrate and the stability. And it is changed depending on the operating and geometry condition. In this paper, the leakage flowrate and stability with change of the height and length were investigated by theoretical analysis and experiment. The parameter of the height and length is expressed to the b and L. The decreasing of the b resulted in the increasing of equivalent whirl frequency ratio in the experimental result at the low speed and high pressure not such as theoretical analysis. As the L increased the leakage flowrate decreased and stiffness and direct damping coefficient increased in the experimental result. That was similar to the theoretical analysis.