• Restorative Dentistry and Endodontics
• /
• 제26권1호
• /
• pp.16-22
• /
• 2001

The purpose of this study was to evaluate the marginal microleakage of condensable composite resin restorations according to flowable resin lining of internal cavity wall. The eighty extracted human molar teeth without caries and/or restorations are used The experimental teeth were randomly assigned into four groups of ten teeth each. Eighty caries-free extracted human molars were used in this study. The conventional class II cavities (box-shaped on mesial and distal surface, faciolingual width : 3mm, gingival wall depth : 1.5mm) were prepared 1mm below cementoenamel junction with a # 701 carbide bur. The teeth were divided into four groups, and then each group were subdivided into A & B group according to flowable resin & compomer lining ; Group 1-A : Tetric Ceram filling, Group 1-B : Tetric Flow lining and Tetric Ceram filling, Group 2-A Ariston pHc filling, Group 2-B : Tetric Flow lining and Ariston pHc filing, Group 3-A SureFil filling, Group 3-B : Dyract Flow lining and SureFil filling, Group 4-A : Pyramid filling, Group 4-B : Aeliteflo lining and Pyramid filling. To simulate as closely as possible the clinical situation during retoration placement, a "restoration template" was fabricated, and the condensable resin was filled using a three-sited light-curing incremental technique. All the materials used were applied according to the manufacturers' instructions. The specimens were stored in the 100% humidity for 7 days prior to thermocycling (100 thermal cycles of 5~55$^{\circ}C$ water with a 30-second dwell time) The specimens were immersed in 2% metyleneblue dye for 24 hours, and then embedded in transparent acrylic resin and sectioned mesiodistally with diamond wheel saw. The degree of marginal leakage was scored under stereomicroscope ($\times$20) and the data were analyzed by Kruskal-Wallis test and Wilcoxon signed ranks test. The results were as follows : 1. In the gingival margins of all the group, microleakage of subgroup B was less than subgroup A. 2. In the group 1, 2, 4, there was significant differences between subgroup A and B (p<0.05), but in the group 3, there was not significant different between group 3-A (SureFil) and group 3-B (Dyract flow/SureFil) (p>0.05). 3. In the subgroup A and B, there was significant different between all group except group 4 of subgroup A. From the results above, it was suggested that the cavity lining of flowable resin and flowable compomer in condensable resin restoration decrease microleakage at gingival margin, and does improve their ability to seal the gingival margin of class II preparation.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1999년도 봄 학술발표회 논문집
• /
• pp.513-520
• /
• 1999

20 million tons of coal ash has been produced in Korea annually. This causes the environmental problems and the cost of land for ash pond. However the amount of coal ash for recycling is small because of the low level of recycling technology and the ignorance. As the coal ash has the significant engineering properties, it can be utilized as soft ground stabilizer, backfill materials and so forth. The purpose of this paper is to summarize some of the recycling methods of coal ash. One is structural backfill materials, the other is flowable fill. Optimal mixture ratio(fly ash : bottom ash) is determined for structural backfill materials and the model test is performed. The model test accompanied with physical tests were executed for identifying that the flowable fly ash can be used as fill materials such as trench back filling.

• 한국지반환경공학회 논문집
• /
• 제6권2호
• /
• pp.31-38
• /
• 2005

유동성 재료는 자기수평능력을 갖고 있으며, 액체와 같은 물질로 최대단위중량의 95~100 %의 자기 다짐율을 발휘할수 있다. 유동성 재료는 노동력이 적게 들고, 시공속도를 높일수 있으며, 접근이 어려운 장소에도 적용이 가능하면서도 재굴착이 용이한 장점이 있다. 따라서 각종 트렌치, 굴착작업, 지중구조물, 오수 및 유틸리티 관과 지중의 공동충전 등에 이용된다. 본 연구의 목적은 고함수비의 점성토와 폐스티로폼 입자, 안정재 등으로 구성된 유동성 재료의 공학적 특성을 평가하는 것이다. 이를 위하여 일축압축실험, 유동성 시험 및 모형충전성 실험을 실시하였으며 폐기물을 활용한 혼합토는 안정재의 양을 $1.0(kN/m^3){\sim}1.2(kN/m^3)$이상을 사용하면 유동성재료로서 사용가능한 것으로 나타났다.

• 한국콘크리트학회:학술대회논문집
• /
• 한국콘크리트학회 2005년도 봄학술 발표회 논문집(II)
• /
• pp.53-56
• /
• 2005

High flowable concrete was first developed in 1988 to achieve durable concrete structures. High flowable concrete can improve workability sharply reason why the concrete has properties of resistance to segregation, filling ability, passing ability without compacting. Therefore, as we apply a high flowable concrete to a large dimensional tunnel which constructed in special environment, we can get workability, strength and durability required. Tunnel lining concrete with a large dimension has to use necessarily fly ash and slag for the properties of high flowability and watertight. We can expect improvement of workability and durability, mitigation of hydration, reducing shrinkage, enhancement of watertight by using cementitious materials. This paper proposes investigations for establishing a mix-design method and high flowability-strength testing methods have been carried out from the viewpoint of making a standard concrete tunnel lining with large dimension a standard.

• 한국재료학회지
• /
• 제26권9호
• /
• pp.455-459
• /
• 2016

The deposition process for the gap-filling of sub-micrometer trenches using DMDMOS, $(CH_3)_2Si(OCH_3)_2$, and $C_xH_yO_z$ by flowable chemical vapor deposition (F-CVD) is presented. We obtained low-k films that possess superior gap-filling properties on trench patterns without voids or delamination. The newly developed technique for the gap-filling of submicrometer features will have a great impact on IMD and STI for the next generation of microelectronic devices. Moreover, this bottom up gap-fill mode is expected to be universal in other chemical vapor deposition systems.

• 한국구조물진단유지관리공학회 논문집
• /
• 제6권3호
• /
• pp.177-184
• /
• 2002

The most tunnel damage such as cracks or leakage which exist in tunnel lining commonly, is caused by the cavities where exist behind the tunnel lining, through the tunnel safety inspections. These cavities were analysed to affect a stability of a running-tunnel seriously. This study is on the development of the controlled low-strength and flowable filling material which is able to apply to the cavity behind the tunnel lining. The major materials of backfilling developed are a crushed sand and a stone-dust which exists as a cake-state and is a by-product obtained in the producting process of aggregate. It is conformed with the design standard to the physical characteristics of backfilling. The backfilling material developed is designed to reduce the fair amount of cement. According to the designed compound ratio, it is carried out the laboratory tests such as a compressive strength and a chemical analyses and is applied to dilapidated old tunnel for an application assessment.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2021년도 가을 학술논문 발표대회
• /
• pp.72-73
• /
• 2021

In this study, the engineering characteristics of CLSM mixed with GBFS and GF were identified to review the applicability as a replacement material and further evaluate the recharge and field applicability as a joint filler material. First, Using more than 30% of GBFS to replace FA enabled bleeding control through improved fluidity. Second, When using more than 30% of FNS to replace sand, it was found that adding 0.25~0.35 of the AE agent is effective for bleeding control through improved fluidity. Third, When using more than 30% of both GBFS and FNS in combination, it was found that adding 0.3~0.35 of the AE agent is effective for bleeding control through improved fluidity. Also, it was confirmed that proper mixing of 15~60% of GF secured the effective strength and desired quality as a refiller and joint filler material.

• 대한소아치과학회지
• /
• 제51권3호
• /
• pp.220-228
• /
• 2024

In clinical pediatric dentistry, a base material with optical properties, including transparency, that can mask the color of the material used for root canal-filling is preferred. This study aimed to examine the optical properties of various base materials by thickness. The disk-shaped specimens were photopolymerized and fabricated using Ionosit (IN), TheraCal LC (TL), TheraCal PT (PT), and A2 shade of Filtek^TM Supreme Flowable Restorative (FZ), Fuji II LC (FL), and Ketac^TM Fil (KF) with 1 and 2 mm thickness. The color parameters of these specimens were measured using a spectrophotometer on a black and white background and were measured using the same method on a mold containing Vitapex^® and gutta-percha. The translucency parameter (TP) and color difference were calculated for each group. The Kruskal-Wallis and Bonferroni tests were used in the statistical analyses. The TP decreased when the thickness was 2 mm compared with 1 mm. The TP values of TL and PT were the lowest at all thicknesses. The TP values of 2 mm thickness in all molds filled with Vitapex^® and gutta-percha were the lowest for TL, PT, KF, and IN. In TL and PT, the color difference before and after the application of the canal-filling material was the smallest, regardless of material thickness. Within the limits of this in vitro study, TL, PT, KF, and IN demonstrated better masking of the color of canal-filling material.

• 한국지반환경공학회 논문집
• /
• 제22권3호
• /
• pp.5-13
• /
• 2021

인구증가와 산업발달로 산업폐기물의 발생량은 매년 증가하고 있으며, 미분된 석탄을 사용하는 화력발전소에서는 석탄의 연소 후에 많은 양의 석탄회가 발생된다. 이 중 비산재(fly ash)는 시멘트 제조 원료 및 콘크리트 혼화재 등으로 재활용되고 있으나, 약 20%는 활용되지 못하고 매립되고 있다. 이러한 많은 양의 석탄회가 지속적으로 매립됨으로 인해 매립지의 포화문제와 토양 및 수질오염 등의 환경오염 문제로 석탄회의 올바른 처리와 재활용 방안의 모색이 필요하다. 최근 지하구조물 공사와 고성토부의 교대 뒷채움 공사 등 장소가 협소하여 다짐작업이 어려운 공사가 증가하고 있으며 특히, 복토 및 뒤채움 작업은 굴착과정 중 자연지반의 교란을 수반하기 때문에 복토에 따른 철저한 다짐관리가 구조물과 지반의 안정에 필수적이다. 그러나 배후지반이 협소하거나 적절한 다짐장비의 부족, 과다짐으로 인한 구조물의 손상 등의 문제로 인하여 다짐관리가 어려운 실정이다. 따라서, 최근에는 다짐작업이 필요하지 않으면서도 적정한 강도를 발휘할 수 있는 유동성 성토재료의 사용이 증가하고 있다. 유동성 성토재료는 주재료인 토사에 물과 시멘트 등의 고화재를 혼합하여 조성된 안정처리토로서 경화되기 전에는 높은 유동성을 지니고 있어 다짐작업이 필요하지 않으며, 경화 후에는 일반 토사에 비해 높은 강도와 지중매설물에 작용하는 토압 감소효과를 얻을 수 있기 때문에 다짐이 곤란한 장소에서의 되메우기나 충전 등에 활용되고 있다. 본 연구에서는 고함수비의 점성토와 산업폐기물인 석탄회를 활용한 유동화 처리토의 사용 가능성을 평가하기 위하여 재료의 유동 특성, 강도, 지지력 특성을 분석하고 지중매설물에 적용 시 토압감소 효과를 규명하고자 한다.

• 대한소아치과학회지
• /
• 제36권1호
• /
• pp.20-29
• /
• 2009

본 연구는 광중합 충전 재료의 적층 방법에 따른 중합수축 양상을 스트레인 게이지를 이용하여 측정하고, 이를 응력으로 환산하여 치면에 미치는 영향을 평가하였다. 발거된 영구치 70개의 치경부에 가로 3 mm, 세로 3 mm, 높이 1.5 mm의 와동을 형성하고, 일회 충전, 수평 적층법, 사면적층법으로 나누어 수복 재료를 충전하였다. Plasma arc lamp(PAL)를 사용한 고출력 광중합기를 광원으로 사용하였으며, 수복 재료는 Filtek $Z-250^{(R)}$ 복합레진, $Dyract^{(R)}$ AP 컴포머 그리고 $Tetric^{(R)}$ Flow 유동성 복합레진을 사용하였다. 중합과정동안 스트레인 게이지를 이용하여 치면에 발생된 스트레인을 측정하였고, 이를 응력으로 환산하여 다음과 같은 결론을 얻었다. 1. Strain 값은 광중합 개시와 함께 급격히 증가하였으며, 시간이 지남에 따라 서서히 감소하는 양상을 보여 주었다. 2. $Z-250^{(R)}$의 수축응력이 $Dyract^{(R)}$ AP와 $Tetric^{(R)}$ Flow에 비해 상대적으로 높게 나타났으나 통계학적 유의차는 없었다(p>0.05). 3. $Z-250^{(R)}$과 $Dyract^{(R)}$ AP에서 3가지 와동 충전 방법 간에는 수축응력의 차이가 없었다(p>0.05). 4. 와동 충전 방법에 따른 충전 재료 간에도 수축응력의 유의차는 없었다(p>0.05). 이상의 결과를 종합해보면 $Dyract^{(R)}$ AP는 광중합 과정과 자가 중합 과정이 함께 일어남으로 인해 $Z-250^{(R)}$보다 상대적으로 중합 수축이 적게 나타난 것으로 판단되었다. $Tetric^{(R)}$ Flow는 한 번에 충전을 완료할 수가 있어 시간 소모가 적고 치질에 대한 중합수축력도 적어 유치 와동 충전 시 유용한 충전 방법이라고 판단되었다. 향후 와동 충전 방법의 방향과 광중합 시간 간격이 광중합수축에 미치는 영향 등에 대한 추가 연구가 필요하다고 사료되었다.