• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.11a
• /
• pp.215-217
• /
• 2014

In Software Defined Network (SDN), data plane and control plane are decoupled. Dummy switches on the data plane simply forward packet based on the flow entries that are stored in its flow table. The flow entries are generated by a centralized controller that acts as a brain of the network. However, the size of flow table is limited and it can conduct a security issue related to Distributed Denial of Service (DDoS). Especially, it related to resource attack that consumes all flow table resource and consumes controller resources. In this paper, we will analyze the impact of flow table limitation to the controller. Then we propose an approach that is called Flow Table Management to handle flow table limitation.

• 한국전산유체공학회:학술대회논문집
• /
• 2000.10a
• /
• pp.9-14
• /
• 2000

Computational methods can be classified roughly into two parts: one is the methods based on a potential flow theory, and the other is numerical solvers(CFD) based on Navier-Stockes equation. Methods based on a potential theory are more effective than CFD when the free surface effect is considered. Especially Rankine source method seems to become widespread for simulations of wave making problems. For computations of viscous flow problems, CFD techniques have rapidly been developed and have shown many successful results in the viscous flow calculation. Present paper introduces a computational system 'WAVIS' which includes a pre-processor, potential ant viscous flow solvers and a post-processor. To validate the system, the calculated results for modem commercial hull forms are compared with measurements. It is found that the results from the system are in good agreement with the experimental data, illustrating the accuracy of the numerical methods employed for WAVIS.

• 한국전산유체공학회:학술대회논문집
• /
• 2001.05a
• /
• pp.1-8
• /
• 2001

A CFD-based design method for transonic axial compressor blades was developed based on three-dimensional Navier-Stokes flow physics. The method employs a sectional three-dimensional (S3D) analysis concept where the three-dimensional flow analysis is performed on the grid plane of a span station with spanwise flux components held fixed. The S3D analysis produced flow solutions nearly identical to those of three-dimensional analysis, regardless of the initialization of the flow field. The sectional design based on the S3D analysis can include three-dimensional effects of compressor flows and thus overcome the deficiencies associated with the use of quasi-three-dimensional flow physics in conventional sectional design. The S3D design was first used in the inverse triode to find the geometry that produces a specified target pressure distribution. The method was also applied to optimize the adiabatic efficiency of the blade sections of Rotor 37. A new blade was constructed with the optimized sectional geometries at several span stations and its aerodynamic performance was evaluated with three-dimensional analyses.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.3
• /
• pp.55-58
• /
• 2008

The objective of this research is to design, manufacture and test a mass flow controller capable of measuring compressible as well as incompressible fluid flows based on a 'bucket and stop-watch' method. The basic principle behind such a system is the measurement of time, where the time taken to fill and empty a bucket of known volume is measured. This device should be able to handle fluid flows in the range of 0.1 ml/min to 10 ml/min within an accuracy of ${\pm}$1%. For the flow meter to be able to compete with established designs, it must be not only comparable in cost and robustness, but also very accurate and reliable as well.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.13 no.2
• /
• pp.733-750
• /
• 2019

Software Defined Networking (SDN) is a new network paradigm, allowing administrators to manage networks through central controllers by separating control plane from data plane. So, one or more controllers must locate outside switches. However, this separation may cause delay problems between controllers and switches. In this paper, we therefore propose a Priority-based Scheduling policy for OpenFlow (PSO) to reduce the delay of some significant traffic. Our PSO is based on packet prioritization mechanisms in both OpenFlow switches and controllers. In addition, we have prototyped and experimented on PSO using a network simulator (ns-3). From the experimental results, PSO has demonstrated low delay for targeted traffic in the out-of-brand control network. The targeted traffic can acquire forwarding rules with lower delay under network congestion in control links (with normalized load > 0.8), comparing to traditional OpenFlow. Furthermore, PSO is helpful in the in-band control network to prioritize OpenFlow messages over data packets.

• International conference on construction engineering and project management
• /
• 2009.05a
• /
• pp.1359-1363
• /
• 2009

The object of this research is to develop a simulation system for earthmoving operations in consideration of the impact of congestion in-between equipment and existing traffic flow around the site. The congestion in-between equipment and traffic flow affect work productivity. The conventional discrete event simulation, however, has limitations in simulating the flow of construction equipment. To consider the impact of congestion in-between equipment and existing traffic flow, in this paper, a multi-agent based simulation model that can realize characteristics of truck behavior more accurately to consider the impact of congestion was proposed. In this simulation model, multiple agents can identify environmental changes and adapt themselves to the new environment. This modeling approach is a better choice for this problem since it describes behavioral characteristics of each agent by sensing changes in dynamic surroundings. This study suggests a detailed system design of the multi-agent based simulation system.

• Journal of the Korean Society for Aviation and Aeronautics
• /
• v.30 no.3
• /
• pp.38-53
• /
• 2022

Recently, the acquisition and production of information using digital tools and the creation of new knowledge are emphasized as important educational elements. Therefore, in this study, the effect of learning achievement according to the digital literacy level of college students was analyzed. For the analysis, a questionnaire is conducted with college students majoring in aviation services attending universities in Seoul Capital Area and Chungcheong area. To verify the hypothesis of the study, demographic characteristics are identified based on the questionnaire, reliability and validity of measurement items are verified, and structural equation model analysis is performed to verify the hypothesis. The analysis results are as follows. First, among the sub-factors of digital literacy competency of college students majoring in aviation service, 'technology use' is found to have a positive effect on 'cognitive flow' and 'emotional flow' of learning flow except 'behavioral flow'. Second, among the sub-factors of digital literacy competency, 'self-learning' is found to have a positive effect on 'cognitive flow', 'emotional flow', and 'behavioral flow' in learning flow. Third, the sub-factors of learning flow, 'cognitive flow', 'emotional flow', and 'behavioral flow' have a positive effect on 'learning satisfaction'. Fourth, 'learning satisfaction' is found to have a positive effect on 'learning outcomes'. Based on the research results, practical support measures and strategies for educational success are presented.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.8 no.7
• /
• pp.2512-2531
• /
• 2014

We propose a new Distributed Denial of Service (DDoS) defense mechanism that protects http web servers from application-level DDoS attacks based on the two methodologies: whitelist-based admission control and busy period-based attack flow detection. The attack flow detection mechanism detects attach flows based on the symptom or stress at the server, since it is getting more difficult to identify bad flows only based on the incoming traffic patterns. The stress is measured by the time interval during which a given client makes the server busy, referred to as a client-induced server busy period (CSBP). We also need to protect the servers from a sudden surge of attack flows even before the malicious flows are identified by the attack flow detection mechanism. Thus, we use whitelist-based admission control mechanism additionally to control the load on the servers. We evaluate the performance of the proposed scheme via simulation and experiment. The simulation results show that our defense system can mitigate DDoS attacks effectively even under a large number of attack flows, on the order of thousands, and the experiment results show that our defense system deployed on a linux machine is sufficiently lightweight to handle packets arriving at a rate close to the link rate.

• Journal of KIISE:Software and Applications
• /
• v.28 no.12
• /
• pp.910-920
• /
• 2001

We developed a SIFC(Slice-based Information Flow Graph) For modeling the information flow on program on the basis of the information flow of a data tokens on program slices. Then we defined a SCM(Slice-based Complexity Measure) for measuring the program complexity by measuring the complexity of information flow on SIFG, We showed that, according to Zuse's approach, it assumed ordinal scale based on atomic modifications on SIFG and that it was additive to binary operation MBSEQ and that it was not additive to binary operation MBALT but satisfied Weyuker's 9th axiom. Also based on comparison with the existing measures, we showed that SCM could measure not only the control and data flow in program but also the physical size of program.

• Journal of Environmental Science International
• /
• v.17 no.9
• /
• pp.957-968
• /
• 2008

The purpose of this study is to analyze the characteristics of hydraulic behavior of the natural channel flow according to the temporal classification mode, and thus propose the hydraulic analysis method for future channel design. For analysis, the temporal flow characteristics of the channel section was divided into the steady flow and the unsteady flow. For hydraulic analysis, the HEC-RAS model, which is a one-dimensional numerical analysis model, and the SMS-RAM2 model, which is a two-dimensional model, were used and the factors used for analysis of hydraulic characteristics were flood elevation and flow rate. The flow state was analyzed on the basis of the one-dimensional steady flow and unsteady flow for review. In the unsteady flow analysis the flow rate changed by $(-)0.16%{\sim}(+)0.26%$, and the flood elevation varied by $(-)0.35%{\sim}(+)0.51%$ as compared to the values in the steady flow analysis. Given these results, in the one-dimensional flow analysis based on the unsteady flow the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow. The flow state was analyzed on the basis of the two-dimensional steady flow and unsteady flow. In the unsteady flow analysis the flow rate varied by $(-)0.16%{\sim}(+)1.08%$, and the flood elevation changed by $(-)0.24%{\sim}(+)0.41%$ as compared to the values in the steady flow analysis. Given these analysis results, in the two dimensional flow analysis based on the unsteady flow, the flood elevation and flow rate were greater than when the analysis was done on the basis of the steady flow.