• 한국추진공학회지
• /
• 제3권4호
• /
• pp.67-74
• /
• 1999

고체 물체 표면이나 지표면에 초음속 제트가 충돌할 때 발생되는 문제들은 다단 로켓의 분리, 우주공간에서의 도킹, 수직 이/착륙기, 제트 엔진의 배기가스, 가스터빈 블레이드, 지상 로켓 발사 등의 다양한 상황에서 일어나며 이러한 충돌제트의 유동은 아음속과 초음속 혼합영역, 충격파가 교차하는 영역, 팽창파, 난류 전단층 등의 매우 복잡한 구조를 이루고 있는 것으로 알려져 있다. 본 연구에서는 출구마하수 2, 축소-확대형 초음속 노즐을 통해 과소 팽창된 제트가 수직, 경사평판에 부딪힐 때 형성되는 표면압력분포 및 유동가시화 등을 초음속 유동시험장치를 이용하여 연구하였다. 평판에서의 최대압력은 수직일 경우보다 경사졌을 때 훨씬 더 컸으며, 이는 여러 충격파를 통한 압력 회복 때문이다. 또한, 평판이 자유제트의 첫 번째 충격파 셀 내에 위치할 때 과소 팽창비에 따른 표면압력분포는 서로 유사한 경향을 보여주었다.

• Journal of Microbiology and Biotechnology
• /
• 제25권3호
• /
• pp.381-385
• /
• 2015

In the present study, drop-on-demand two-dimensional patterning of unstained and stained bacterial cells on untreated clean wafers was newly conducted using an electrospray pulsed jet. We produced various spotted patterns of the cells on a silicon wafer by varying the experimental conditions, such as the frequency, flow rate, and translational speed of the electrospray system in a two-dimensional manner. Specifically, the electrospray's pulsed jet of cell solutions produced alphabetical patterns consisting of spots with a diameter of approximately $10{\mu}m$, each of which contained a single or a small number of viable bacteria. We tested the viability of the patterned cells using two visualization methods. This pattering technique is newly tested here and it has the potential to be applied in a variety of cell biology experiments.

• 한국빅데이터학회지
• /
• 제2권2호
• /
• pp.1-7
• /
• 2017

ITS(Intelligent Transport Systems)는 시민들의 교통이용 안전과 편의를 도모하고 교통 시스템의 효율적인 운영 및 관리를 위해 대도시를 중심으로 도입되었다. 우리나라의 경우 ITS가 전국적으로 확대되면서 도로소통상황, 교통량, 대중교통운영현황 및 관리상황, 대중교통이용현황 등 다양한 교통정보가 생성되고 있다. 본 논문에서는 ITS에서 수집되는 데이터 중 하나인 DSRC(Dedicated Short Range Communications) 빅데이터를 활용하여 도시 교통구조를 네트워크 분석 기법을 통해 규명한다. 이를 통해 도심에서의 복잡한 교통현상을 단순화시키고, 차량 흐름에 따른 도시 교통의 구조적 특징을 도출한다. 분석 결과는 도시의 교통을 좀 더 쉽게 이해할 수 있도록 도와주고, 향후에 도시교통의 혼잡 해소방안, 도로 확장 계획 등의 교통정책 수립시 기초연구 자료로 활용할 수 있다.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2003년도 추계학술대회 논문집
• /
• pp.39-42
• /
• 2003

Leading edge extension(LEX) in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present 3-D stereo PIV includes the Identification of 2-D cross-correlation equation, stereo matching of 2-D velocity vectors of two cameras, accurate calculation of 3-D velocity vectors by homogeneous coordinate system, removal of error vectors by a statistical method followed by a continuity equation criterion and so on. A delta wing model with or without LEX was immersed in a circulating water channel. Two high-resolution, high-speed digital cameras$(1280pixel\times1024pixel)$ were used to allow the time-resolved animation work. The present dynamic stereo PIV represents the complicated vortex behavior, especially, in terms of time-dependent characteristics of the vortices at given measuring sections. Quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing to make the easy understanding of the LEX effect or vortex emerging and collapse which are important phenomena occurring in the field of delta wing aerodynamics.

• 대한핵의학회지
• /
• 제38권5호
• /
• pp.344-346
• /
• 2004

A 69-year-old woman was presented with progressed dysphagia, gastric soreness and weight loss during 2 months. She was performed abdomen x-ray, EGDS and abdomen CT. Abdomen x-ray demonstrated punctuate calcification on LUQ. EGDS showed an ulceroinfiltrative mass with bleeding on cardia to antrum of stomach. And CT showed diffuse gastric wall thickness with multiple calcifications. Biopsy of the stomach and esophagus during EGDS examination revealed an adenocarcinoma, with signet ring cell type, infiltrating the wall of the stomach and the distal esophagus. Then acne scan was performed a few days later. It revealed intense uptake in LUQ, corresponding to the calcium containing neoplasm seen on the abdomen x-ray, EGDS and abdomen CT. And there was no evidence of any metastatic lesion and thyroid uptake on the bone scan. There are many reports about accumulation of the tracer in extraosseous lesion, but only a few literatures were reported about gastric calcification in stomach cancer. More over, no reports showed CT images. We are performed many diagnostic examinations and found well correlation between them. The reason of gastric calcification is considered with calcium deposition within extracellular space due to hemorrhage or necrosis. Other possibility offered to explain gastric calcification have been increased blood flow and/or increased neovascularity with capillary leaks of tracer, and specific enzymatic (phosphatases) receptor binding of tracer. So, it was happened ion exchange between intracellular calcium and phosphate groups of tracer.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2009년도 하계학술발표대회 논문집
• /
• pp.645-649
• /
• 2009

Liquid desiccant cooling technology can supply cooling by using waste heat and solar heat which are hard to use effectively. For compact and efficient design of a dehumidifier, it is important to sustain sufficient heat and mass transfer surface area for water vapor diffusion from air to liquid desiccant on heat exchanger. In this study, the plate type heat exchanger is adopted which has extended surface, and hydrophilic coating and porous layer coating are adopted to enhance surface wettedness. PP(polypropylene) plate is coated by porous layer and PET(polyethylene terephthalate) non-woven fabric is coated by hydrophilic polymer. These coated surfaces have porous structure, so that falling liquid film spreads widely on the coated surface foaming thin liquid film by capillary force. The temperature of liquid desiccant increases during dehumidification process by latent heat absorption, which leads to loss of dehumidification capacity. Liquid desiccant is cooled by cooling water flowing in plate heat exchanger. On the plate side, the liquid desiccant can be cooled by internal cooling. However the liquid desiccant on extended surface should be moved and cooled at heat exchanger surface. Optimal mixing and distribution of liquid desiccant between extended surface and plate heat exchanger surface is essential design parameter. The experiment has been conducted to verify effective surface treatment and distribution characteristics by measuring wall side flow rate and visualization test. It is observed that hydrophilic and porous layer coating have excellent wettedness, and the distribution can be regulated by adopting holes on extended surface.

• 한국가스학회지
• /
• 제5권3호
• /
• pp.1-8
• /
• 2001

본 연구는 한국가스공사에서 운영중인 천연가스 공급관리소의 가스히터를 대상으로 겨울철 히터 가동 중단시, 가스히터 내부의 열전달 매체액 (Bath Water)이 빙점에 도달하는 시간을 계산하여 보수주기에 대한 결정 및 동파 취약 부위에 대한 영향을 판단하기 위해 가스히터의 체적을 고려한 비선형 3차원 전산모사를 수행하였다. 이용된 시뮬레이터는 미국 FLUENT사의 FLUENT V 5.0으로서 열유체 유동해석 범용 Code이다. 본 문제는 열전도에 관한 문제로 에너지 방정식을 푸는 방식으로 진행되지만 가스히터의 체적을 고려한 3차원 계산을 수행하기 위해 현장의 가스히터 형상 및 축적을 거의 유사하게 모델링하였고 표면에서 공기에 의한 대류 (Convection)문제와 단열재 사이의 전달 (Conduction)문제, 히터내부 액체의 자연대류 (Natural Convection) 그리고 배관을 통한 열손실의 문제를 고려한 복합적인 열전달 현상을 분석하였다.

• 한국항공우주학회지
• /
• 제35권11호
• /
• pp.1036-1042
• /
• 2007

비행조종컴퓨터 하드웨어 개발은 상용 툴 및 전용 개발치구가 전무하여 전 근대적인 방법으로 개발하고 있어 개발 기간을 단축하기가 용이하지 않다. 모델링 및 시뮬레이션과 가상현실 기술을 이용하여 비행조종컴퓨터 하드웨어 개발에 적용하는 프로세스 개선 툴이 필요하게 되었다. 본 논문에서는 비행조종컴퓨터 입/출력 신호 흐름, 입력 신호의 고장모니터 및 고장 관리 알고리즘, 논리 회로의 작동, 회로기판 조립체의 형상 및 장착 등과 같은 비행조종컴퓨터의 설계특성을 가상의 공간에 시각화 하고 모사할 수 있는 프로세스 개선 툴을 제안한다. 프로세스 개선 툴 사용자는 open flight format의 3차원 모델링 데이터를 이용하여 구성된 비행조종컴퓨터 모델을 사용하여 회로기판 조립체까지 분해/조립을 할 수 있으며 다양한 비행조종컴퓨터 설계 형상을 시뮬레이션 할 수 있다.

• The Korean Journal of Pain
• /
• 제22권1호
• /
• pp.52-57
• /
• 2009

Background: Transforaminal epidural injection (TEI) may be useful to treat unilateral pain that has a dermatomal distribution. In this approach, the needle tip can be placed closer to the dorsal root ganglion and ventral aspect of the nerve root. However many studies have reported that serious complications following TEI occurred more frequently when it was conducted at the cervical level. One of the presumptive mechanisms of the complication is intravascular injection. Therefore this study was conducted to identify the incidence of complications in response to intravascular injections at cervical segments. Methods: This study included all patients, who visited our pain clinic and had radicular symptoms or herpes zoster associated pain. All procedures were conducted under fluoroscopic guidance with contrast enhancement by one of the authors. After the ideal needle position was confirmed by biplanar fluoroscopy, the blood aspiration through the needle hub was evaluated, and a 3 ml mixture of nonionic contrast (2 ml) with normal saline (1 ml) was injected at a rate of 0.3-0.5 ml/sec continuously under real time fluoroscopic visualization. We then classified the contrast spreading pattern as neural, simultaneous neural and vascular, or vascular. Results: A total 71 cervical TEIs were performed. In 26 cases (36.6%), the contrast only spread to the nerve sheath. However, 45 cases (63.4%) showed an intravascular spreading pattern, 37 (52.1%) of which showed a neural and vascular pattern and 8 (11.3%) of which showed only a vascular pattern. Conclusions: Approximately two thirds of the cases of cervical TEI were found to lead to intravascular spreading, which is much higher than the incidence reported in previous studies.

• Journal of Mechanical Science and Technology
• /
• 제19권5호
• /
• pp.1194-1205
• /
• 2005

The common-rail injection systems, as a new diesel injection system for passenger car, have more degrees of freedom in controlling both the injection timing and injection rate with the high pressure. In this study, a piezo-driven injector was applied to a high pressure common-rail type fuel injection system for the control capability of the high pressure injector's needle and firstly examined the piezo-electric characteristics of a piezo-driven injector. Also in order to analyze the effect of injector's needle response driven by different driving method on the injection, we investigated the diesel spray characteristics in a constant volume chamber pressurized by nitrogen gas for two injectors, a solenoid-driven injector and a piezo-driven injector, both equipped with the same injection nozzle with sac type and 5-injection hole. The experimental method for spray visualization was based on back-light photography technique by utilizing a high speed framing camera. The macroscopic spray propagation was geometrically measured and characterized in term of the spray tip penetration, spray cone angle and spray tip speed. For the evaluation of the needle response of the above two injectors, we indirectly estimated the needle's behavior with an accelerometer and injection rate measurement employing Bosch's method was conducted. The experimental results show that the spray tip penetrations of piezo­driven injector were longer, on the whole, than that of the solenoid-driven injector. Besides we found that the piezo-driven injector have a higher injection flow rate by a fast needle response and it was possible to control the injection rate slope in piezo-driven injector by altering the induced current.