• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.3
• /
• pp.445-452
• /
• 2002

The main objective of modern reproductive technologies in pig reproduction is to increase reproductive efficiency and rates of genetic improvement. They also offer potential for greatly extending the multiplication and transport of genetic materials and the conservation of unique genetic resources in reasonably available forms for possible future use. The development and refinement of these technologies is concentrating on gamete and embryo collection, sorting and preservation, in vitro production of embryos, culturing, manipulation of embryos (splitting, nuclear transfer, production of chimeras, establishment embryo stem cells, and gene transfer) and embryo transfer. Also, the development of these novel technologies is facilitated by modern equipment for ultrasonography, microscopy, cryopreservation, endoscopy, and flow cytometry, microinjectiors, micromanipulators and centrifugation. The real impact on herd productivity will come from combining new reproductive techniques with powerful DNA technologies. The new reproductive techniques will allow a rapid turnover of generations, whereas the DNA technology can provide selection, which does not need phenotypic information when the selection decisions are made.

• YAKHAK HOEJI
• /
• v.46 no.1
• /
• pp.6-10
• /
• 2002

The present study investigated the rheological properties and adjuvant activity of IgG production of ι-Carrageenan prepared using two different methods . incubation at 37.4$^{\circ}C$ after either being heated or not being heated int 6$0^{\circ}C$ for 10 minutes. The carrageenan exhibited plastic flow with thixotropy in both cases, but the viscosity of the sample that had been heated was significantly higher. C57BL/6 mice were then immunized intraperitoneally with either of the carrageenans containing protein antigens. The maximum adjuvant effect was found when using the nonheated carrageenan, especially in term of IgG2a, IgG2b, and IgG3 production. In contrast, IgG1 antibody production was the same far both types of carrageenan. furthermore, when administered oral1y, neither type of carrageenan resulted in the production of any antibodies.

• Journal of Korea Society of Industrial Information Systems
• /
• v.5 no.1
• /
• pp.47-52
• /
• 2000

This study objectively in examines materials related to factory rationalization of D Corp., a regionally based enterprise. One reason that previous factory rationalizations have not been all that effective is that each firm has not used strategies specially designed for it Despite the fact that each firm has a different culture, and different human and physical resources, the application of rationalization without any modifications has produced many problems. In order to stabilize the production system and reduce the capacity of the factory, D Corp. changed the basic 5 S's and stimulated the factory atmosphere through computer education. Rationalization stabilized and standardized the factory, and organized the physical resources and each area of the factory according to their place in the process of production. It also made improvements that verified the party responsible for the flow of the complex production system, and simplified analysis supervision of production, and ex post management. We think that the successful example of D Corp. can serve as a real, tangible model for small and medium regionally-based firms to follow.

• International Journal of Human Ecology
• /
• v.15 no.2
• /
• pp.1-12
• /
• 2014

This study focuses on apparel production and consumption trends in major Asian economies in order to understand a paradigm change in the Asian fashion industry. A comparison of trade among ASEAN, NICs, and developed countries shows the changes that have occurred in terms of production and consumption of fashion products before and after 2000 in Korea, Hong Kong, and China. The flow of imports and exports in the apparel industry was analyzed using UN trade statistics data. The results found a change of industry structures in Asian NICs and ASEAN countries. Garment production bases have moved to lower cost regions like China and ASEAN; in addition, NICs sent a part of their export business in the fashion industry to ASEAN countries. The Asian fashion industry has transformed from a production base for developed countries into a consumption market with the emergence of newly industrializing economies.

• IE interfaces
• /
• v.11 no.2
• /
• pp.177-190
• /
• 1998

The work-order performs an important role in make-to-order production. The development of work-order system in this production is more complex than work-order system in planing production. To construct work-order system, load of directors for work-order must be decreased, and production management between scheduling of master plan and current workshop conditions must be considered. In this study, we grasped troubles in present work-order system and flows of information for work order. Using these results are made database schemas and data flow diagrams for effective development of work-order system. And then, for successful establishment of work-order system and actual use of directors, we considered systematic and easy user-interface. For a case study, development procedures of work-order system are presented for plant factory.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.2
• /
• pp.1-8
• /
• 2001

The water treatment by electrochemical method was performed to increase the yield of production. Continuous plug flow reactor was operated to treat poultry and domestic wastewaters. Experimental results were compared with experimental results of the wastewater treatment by chemical coagulation, they were increased over 10% in the removal efficiency of COD and the production rate of sludge was reduced by 30%. Ozone utilized to degrade or change the organic chemical structures, which removal efficiency increased to 20% in the electro-coagulation reactor. Economic evaluation was performed to estimate total cost of electro-coagulation reactor in comparison with that of chemical coagulation method. The total cost to treat 1000 ton/day of domestic wastewater was reduced by 50%.

• Journal of Biosystems Engineering
• /
• v.23 no.1
• /
• pp.13-20
• /
• 1998

Carbonized rice husk(char from rice husk) can be used to improve soils for planting, seedlings, horiculture, pomiculture and truck gardening. Although it is not a fertilizer in nature, it stimulates the growth of plants. Carbonized rice husk is highly recommended for raising soil/water temperature, keeping moisture and aerating roots of plants. The objective of this study was to develop the effective production method of carbonized rice husks by a non-slagging vertical cyclone combustor. A cyclone combustor w vortex collecor Pocket in addition to central collector pocket was selected and tested. Isothermal tests and mixed firing with LPG and rice husk were performed in order to characterize the system. hut rice husk was used during the isothermal test to find the mass collected of rice husk. It was impossible to ignite rice husk itself over the experimental conditions considered in this experiment. The composition of original and carbonized rice husks was analyzed by the ultimate analysis. With the air flow rate of 20 ㎥/h, LPG flow rate of 0.45 1/min, the required carbonized rice husk could be obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2002.05a
• /
• pp.666-669
• /
• 2002

Process design of hot forging, asymmetric to symmetric rail, which is used for the turnout of railway express has been investigated. Owing to the big difference in shape between the initial billet and the final forged product, it is impossible to hot forge the rail in a single step. Therefore, multi step forging as well as die design for each step are necessary for the production. The deformation behavior during hot forging has been analyzed by the numerical simulation through commercial FEA software, DEFORM$^{TM}$-2D. Modification of the design and repeated simulation have been carried out on the basis of the simulation result. For comparison with the simulation results, flow analysis experiment using plasticize has been also carried out. The results of the flow analysis experiment showed good agreement with those of the simulation. Therefore, the developed process design could be applied to the actual production.

• IE interfaces
• /
• v.10 no.2
• /
• pp.57-67
• /
• 1997

This paper is a report of a simulation study that investigates a dynamic approach to scheduling jobs in a conventional shop floor, especially in an assemoly-type welding process. We consider both JIT arrival and JIT delivery. Various dispatching rules are tested for the following performance measures; mean flow time, rate of tardy jobs, mean tardiness, sum of mean tardiness and mean earliness. The results indicate that SPT rule is the best for the mean flow time. MSLACK that we suggest in this paper, is the best for the mean tardiness and the sum of mean tardiness and mean earliness. However, it is not clear that which rule is the best for the rate of tardy jobs.

• Journal of Korean Institute of Industrial Engineers
• /
• v.21 no.1
• /
• pp.103-118
• /
• 1995

This paper is concerned with developing flow control method for a dynamic multistage manufacturing system with interstage buffers and unreliable machines. For the effective control of proposed manufacturing system, the three-level hierarchical scheme is introduced. At the top level, we collect the system data and then, design the buffer sizes and hedging points. Short-term production rates are calculated at the middle level. At the bottom level, actual dispatching times are determined by Clear the Largest Buffer Level rule. The control method utilizes the material and the space in the buffers to alleviate the propagation of a failure to other machines in the system and keeps the production close to demand. Finally, a numerical example is provided to illustrate the mathematical control method developed and implemented in a dynamic manufacturing environment.