• Journal of the Semiconductor & Display Technology
• /
• v.12 no.2
• /
• pp.33-37
• /
• 2013

In this study, we have investigated the effect of the substrate temperature and hydrogen flow rate on the characteristics of IZO thin films for the organic light emitting diodes (OLED) devices. For this purpose, IZO thin films were deposited by RF magnetron sputtering at room temperature and $300^{\circ}C$ with various $H_2$ flow rate. In order to investigate the influences of the oxygen, the flow rate of hydrogen in argon mixing gas has been changed from 0.1sccm to 0.9sccm. IZO thin films deposited at room temperature show amorphous structure, whereas IZO thin films deposited at $300^{\circ}C$ show crystalline structure having an (222) preferential orientation regardless of $H_2$ flow rate. The electrical resistivity of IZO film decreased with increasing flow rate of $H_2$ under Ar+$H_2$. The change of electrical resistivity with increasing flow rate of $H_2$ was mainly interpreted in terms of the charge carrier concentration rather than the charge carrier mobility. The electrical resistivity of the amorphous-IZO films deposited at R.T. was lower than that of the crystalline-IZO thin films deposited at $300^{\circ}C$. The increase of electrical resistivity with increasing substrate temperature was interpreted in terms of the decrease of the charge carrier mobility and the charge carrier concentration. All the films showed the average transmittance over 83% in the visible range.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.2
• /
• pp.258-264
• /
• 2014

In terms of chemical detection performance related with chemical material sampling, this investigation shows optimized values, resulted from minimizing loss from air turbulence and other reasons when pressure changes on the basis of sampling flow rate Based on simulations and pressure control of the outside conditions it became possible to obtain ion mobility detection optimum values, and to derive standard pressure conditions that is appropriate for DMS characteristic.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2011.11a
• /
• pp.591-594
• /
• 2011

본 논문은 PMIPv6 도메인에 접속한 이동노드의 멀티인터페이스 환경에서 플로우 이동성을 지원하기 위해 HNP(Home Network Prefix) 변환 기법을 제안한다. 기본적으로 PMIPv6 프로토콜은 멀티인터페이스 환경에서 인터페이스 이동성을 제공한다. 하지만 이 기능은 멀티이터페이스 간의 플로우 기반 이동성을 제공하지 못한다. 따라서 본 논문에서는 플로우 이동성을 제공하기 위해 IETF NetExt WG에서 논의되고 있는 논리인터페이스 기반 HNP 변환 기법을 제안한다. 이 기법은 효율적인 플로우 이동성을 제공하기 위한 방안이다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2002.04a
• /
• pp.526-528
• /
• 2002

SIP는 간단한 텍스트 기반의 응용계충 프로토콜로서, H.323을 대체할 수 있는 프로토콜이다. SIP는 인터넷 환경에 그대로 접목 할 수 있고, 새로운 기능 및 부가서비스의 제공이 용이하다는 장점을 가지고 있다. SIP 프로토콜은 요청메시지와 그에 대한 응답으로 구성되는 Request-Response방식이다. SIP의 장점은 유일한 개인 ID를 이용하여 장소와 단말기에 구애를 받지 알고 SIP서비스를 제공받을 수 있는 Personal Mobility Service에 있다. 본 논문에서는 User Agent 사이에 이루어지는 SIP 트랜잭션 (Transaction)을 기본적인 Call-Flow를 통해서 살펴보고자 한다.

• Journal of the Korean Geotechnical Society
• /
• v.27 no.6
• /
• pp.49-61
• /
• 2011

This paper presents the applicability of rheological models for describing fine-laden debris flows and analyzes the flow characteristics as a function of grain size. Two types of soil samples were used: (1) clayey soils - Mediterranean Sea clays and (2) silty soils - iron ore tailings from Newfoundland, Canada. Clayey soil samples show a typical shear thinning behavior but silty soil samples exhibit the transition from shear thinning to the Bingham fluid as shear rate is increased. It may be due to the fact that the determination of yield stress and plastic viscosity is strongly dependent upon interstructrual interaction and strength evolution between soil particles. So grain size effect produces different flow curves. For modeling debris flows that are mainly composed of fine-grained sediments (<0.075 mm), we need the yield stress and plastic viscosity to mimic the flow patterns like shape of deposition, thickness, length of debris flow, and so on. These values correlate with the liquidity index. Thus one can estimate the debris flow mobility if one can measure the physical properties.

• Journal of the Korean institute of surface engineering
• /
• v.40 no.3
• /
• pp.144-148
• /
• 2007

To prepare the transparent electrode for electronic devices such as flat panel or flexible displays, solar cells, and touch panels; tin doped $In_2O_3$ (ITO) films with low resistivity and a high transparency were fabricated using a facing target sputtering (FTS) system at the various oxygen gas flow rate. The carrier concentration and mobility of ITO films were measured by Hall Effect measurement. And the transmittance was measured using the UV-VIS spectrometer. As a result, we can obtain the ITO thin films prepared at 10% oxygen gas flow ratio, thickness 150 nm with transmittance 85% and resistivity $8.1{\times}10^{-4}{\Omega}cm$ and surface roughness 5.01 nm.

• International Journal of Internet, Broadcasting and Communication
• /
• v.13 no.4
• /
• pp.135-142
• /
• 2021

Estimating the locations of workers in a shipyard is beneficial for a variety of applications such as selecting potential forwarders for transferring data in IoT services and quickly rescuing workers in the event of industrial disasters or accidents. In this work, we propose a human movement stream processing system for estimating worker locations in shipyards based on Apache Spark and TensorFlow serving. First, we use Apache Spark to process location data streams. Then, we design a worker location prediction model to estimate the locations of workers. TensorFlow serving manages and executes the worker location prediction model. When there are requirements from clients, Apache Spark extracts input data from the processed data for the prediction model and then sends it to TensorFlow serving for estimating workers' locations. The worker movement data is needed to evaluate the proposed system but there are no available worker movement traces in shipyards. Therefore, we also develop a mobility model for generating the workers' movements in shipyards. Based on synthetic data, the proposed system is evaluated. It obtains a high performance and could be used for a variety of tasksin shipyards.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.1
• /
• pp.32-36
• /
• 2022

AGZO thin films were deposited on glass substrates using RF magnetron sputtering system under Ar flow rates, and their structural, electrical, and optical properties were analyzed systematically. As a result of the XRD pattern, the peak of the (002) (2θ≈33.7˚) orientation was observed, and it was found to have a hexagonal wurtzite structure. The sheet resistance of Ar 5 sccm was 3.073×10² Ω/sq and showed the best electrical properties because of the improvement of mobility due to the increase of the grain size and the variation of RMS roughness. In addition, the average transmittance was more than 90% for all samples, which demonstrated good optical properties. It is expected that the TCO characteristics can be improved by controlling Ar flow rates, and this will increase the efficiency of photoelectronic devices such as OLED and solar cells.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.23 no.3
• /
• pp.177-182
• /
• 2010

The pentacene-based organic thin film transistors(OTFTs) using polyvinylalcohol(PVA) alignment layer were fabricated on the $SiO_2$ evaporated to n-type (111) Si substrates. The pentacene film was deposited by thermally evaporated at $10^{-7}$ torr. X-ray diffraction (XRD) and atomic force microscope(AFM) measurement showed pentacene film which deposited on rubbed PVA layers were partially crystallized at (001) plane. The pentacene OTFTs with PVA layers rubbed perpendicular to the direction of current flow was shown to align better orientation than parallel rubbed case and thus to enhance the mobility and saturation current by a factor of 2.3 respectively. We obtained mobility by 0.026 $cm^2$/Vs and on-off current ratio by ${\sim}10^8$.

• Journal of Magnetics
• /
• v.16 no.4
• /
• pp.444-448
• /
• 2011

In the present study, we separated the marker particles from the suspending particle mixture solution using isotacho-electrophoresis technique, a novel quantitative ionic particle separation method, in the microchannel. A multiple stacking zone of the suspending particle was visualized with variations in electric field strength, pH value and concentration of the ionic solution. In particular, the electrophoretic mobility of ionic particle (fluorescein) was estimated based on the electrophoretic velocity value measured by the particle image velocimetry. As a result, isotacho-electrophoresis zones were clearly visualized as going downstream in the electric field. The particle migration velocity increased proportional to the applied voltage increase; it was also affected by the pH value variations in the ionic solution.