• 컴퓨터교육학회논문지
• /
• 제12권1호
• /
• pp.45-55
• /
• 2009

이 연구에서는 성별의 차이를 고려한 로봇 프로그래밍 학습이 여중학생이 몰입수준과 문제해결력에 미치는 효과를 검증하였다. 프로그래밍 학습 내용과 주제는 동기유발과 몰입수준 향상을 위한 설계원리를 고려하여 구성하였으며, 교수학습은 문제해결력 증진을 위한 창의적 문제해결 수업모형(CPS)을 토대로 구성하였다. 설계된 학습 내용을 중학교 2학년 30명을 대상으로 적용한 결과, 성별의 차이를 고려한 로봇 프로그래밍 학습은 몰입수준과 문제해결력 향상에서 남, 여학생 모두에게 효과가 있는 것으로 나타났다. 특히, 이 연구에서 설계한 성별 차이를 고려한 로봇 프로그래밍 학습은 프로그래밍 학습 몰입수준의 남 여학생의 차이를 해소하는데 효과가 있음을 확인할 수 있었다.

• 대한토목학회논문집
• /
• 제5권2호
• /
• pp.83-90
• /
• 1985

본(本) 논문(論文)은 제체(堤體)의 중앙심벽형(中央心壁型) model을 제작(製作)해서 상류측(上流側) 각(各) 수위(水位)의 변화(變化)에 대한 침투유량(浸透流量)을 실험(實驗)을 통하여 구하고, 이 때의 침윤선형상(浸潤線形狀)과 Equipotential line에 대하여도 고찰(考察)한 것이다. 또한 실험(實驗)에서 얻은 자료(資料)를 FEM기법(技法)을 사용하여 구한 유선망(流線網)의 각요소별(各要素別) Flow-rate에 대한 유속(流速)과 침투유량(浸透流量)을 실험치(實驗値)와 근사리론공식(近似理論公式)에서 산출(算出)된 값과 비교검토(比較檢討)하였다. 침투수량(浸透水量)은 고수위시(高水位時)에서는 실험치(實驗値)보다 FEM 값이 적게 나타났으며, 저수위시(低水位時)에는 거의 비슷한 값이었다. 그리고, 유선망(流線網)이 형성(形成)된 각(各) 요소별(要素別) Flow-rate 는 X, Z 축(軸)은 수위변화(水位變化)가 있어 흐름에 따른 유속(流速)이 크나 Y 축(軸)의 유속(流速)은 무시할 수 있을 정도의 적은 값이었다.

• 국제물리치료학회지
• /
• 제1권2호
• /
• pp.99-106
• /
• 2010

The purpose of this study was to identify the effects of manipulation on the velocity of cerebral blood flow and level of pain in cervicogeinc headache patients. The velocity of cerebral blood flow of 30 cervicogeinc headache patients(male=15, female=15, age=$24.00{\pm}3.60$) and 33 normal subjects(male=15, female=18, age=$23.27{\pm}3.00$) was compared. The 30 cervicogeinc headache patients were divided into suboccipitalis relaxation group, cervical manipulation group, and placebo group, and each were given different interventions. The velocity of cerebral blood flow and pain level was measured before intervention, and 1, 2, 3 weeks after intervention. The velocity of cerebral blood flow was measured with the Transcranial Doppler(TCD), and pain level was measured with visual analog scale(VAS). Blood flow velocity of middle cerebral artery in cervicogeinc headache patients was slower than those in healthy subjects. Physical therapy intervention did not have significant effect on velocity of cerebral blood flow, but slowly decreased at intervention for pain level increased. The suboccipitalis relaxation group and cervical manipulation group showed significant effect in decreasing pain level compared to the placebo group(p<.05). Directly applied manipulation therapy in the neck area not only has effect on joint of cervical and soft tissue but also on blood vessels and nerves which pass the neck area, and because of those results of manual therapy seems to help recovery.

• 대한기계학회논문집B
• /
• 제24권5호
• /
• pp.652-659
• /
• 2000

The purpose of this study is to present the most effective numerical scheme to calculate the unsteady flows. In order to calculate the flow quantities of flow past a circular cylinder, Three-time level and five convective schemes are applied to unsteady and convective terms, respectively. The values obtained are compared with those from the existing experimental and numerical studies. At Reynolds numbers up to 160, time intervals can be expanded 10 times of Implicit Euler scheme using Three-time level method, and it is found that QUICK and CUI schemes work much stable than others even if less grid density conditions. The combination of Three-time level and QUICK scheme gives high resolutions for laminar unsteady problems with PC level.

• 정보교육학회논문지
• /
• 제17권3호
• /
• pp.329-337
• /
• 2013

초급 프로그래밍 과정에서 로봇의 활용은 매우 효과적인 것으로 알려지고 있다. 본 연구에서는 프로그래밍 초급과정에서 로봇의 활용이 몰입에 미치는 영향을 탐구하였다. 실험 적용 결과 몰입의 하위 요소인 선행, 경험, 효과 요소 모두 유의하게 높게 나타나 로봇의 활용은 학습자들의 몰입에 매우 긍정적인 영향을 미치고 있음을 알 수 있었다. 또한 몰입의 하위 요소별 관계를 알아본 결과, 각 요소별로 강한 상관관계를 가지고 있으며, 특히 선행 요소와 경험요소의 상관관계가 높았다. 따라서 로봇의 활용은 몰입이 발생하도록 하는 전제조건으로서 작용하고 있고 이에 따라 경험 요소가 높아지며, 학습자가 느끼는 내재적 보상이 특히 크다는 것을 확인할 수 있었다. 결국 초급 프로그래밍에서 로봇의 활용은 몰입 경험을 강화하고 궁극적으로 학업 성취도에도 긍정적인 영향을 미칠 것으로 기대할 수 있다.

• 한국의류산업학회지
• /
• 제21권4호
• /
• pp.459-467
• /
• 2019

Compression wear provides clothing pressure and affects how blood flows. Facilitating a blood flow is one of the most important functions of compression wear. The wearer's sensibility should be considered when designing compression wear. This study instructed participants to put on 5 types of sport compression wear with different pressure levels (CP-1 to CP-5), measured clothing pressure, blood flow level, blood flow rate, and surface temperature, and examined the pressure level that influenced blood flow through a subjective sensibility assessment. An experiment measured the clothing pressure of compression wear available in the market and found that the pressure ranged 0.6-1.1 kPa for the ankle, 0.7-2.3 kPa for the calf, and 0.9-1.9 kPa for the thigh. Meanwhile, blood flow levels and rates significantly increased when participants wore CP-1, which had the highest clothing pressure level, and CP-2 and CP-4 with middle-level pressure. After exercise, CP-2's surface temperature was the highest and revealed that wearing CP-2 facilitated blood flow. CP-2 was evaluated as most positive in the sensibility assessment and showed a clothing pressure of 0.67-1.82 kPa; its pressure for the calf did not surpass 2.0 kPa. Considering positive physical effect of compression wear on blood flow and subjective psychological effect on participants, CP-2 (0.67-1.82 kPa) would have the most suitable clothing pressure level among other types of the wear in this study.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2006년도 추계학술대회 논문집
• /
• pp.73-77
• /
• 2006

Flow rate measurement is one of the difficult problems in the industrial applications. Especially, flow rate in a partially filled pipeline is affected by many parameters such as water level, channel slop, etc. In the present study, prior to the development of a flowmeter, the flow characteristics has been investigated by particle image velocimetry (PIV) measurements. Three-dimensional velocity distributions were obtained from sectional measurements of velocity profiles according to the water level. As a result, it is found that there is no similarity in the velocity profile when the lateral position is changed. In addition, the maximum velocity does not always occur on the free surface. It depends on the water level. In the aspect of flow rate measurement, the previous calculus based upon point measurement techniques is proved to be inaccurate because of the lack of whole flow information.

• 한국수자원학회:학술대회논문집
• /
• 한국수자원학회 2023년도 학술발표회
• /
• pp.177-177
• /
• 2023

The impacts of dams on transboundary flow are complex and challenging to project and manage, given the potential moderating influence of a broad range of anthropogenic and natural factors. This study presents a global meta-analysis of 168 studies that examines the effect magnitude of dams on downstream seasonal, annual flow, and hydrological extremes risk on 39 hotspot transboundary river basins. The study also evaluates the impact of 13 factors, such as climate, basin characteristics, dams' design and types, level of transboundary cooperation, and socioeconomic indicators, on the heterogeneity of outcomes. The findings reveal that moderators significantly influence the impact of dams on downstream flow, leading to considerable heterogeneity in outcomes. Transboundary cooperation emerges as the key factor that determines the severity of dams' effect on both dry and wet season's flows at a significance level of 0.01 to 0.05, respectively. Specifically, the presence of water-supply and irrigation dams has a significant (0.01) moderating effect on dry-season flow across basins with high transboundary cooperation. In contrast, for wet-season flow, the basin's vulnerability to climate extremes is associated with a large negative effect size. The various moderators have varying degrees of influence on the heterogeneity of outcomes, with the aridity index, population density, GDP, and risk level of hydro-political tension being the most significant factors for dry-season flow, and the risk level of hydro-political tension and basin vulnerability to climate extremes being the most significant for wet-season flow. The results suggest that transboundary cooperation is crucial for managing the impacts of dams on downstream flow, and that various other factors, such as climate, basin characteristics, and socioeconomic indicators, have significant moderating effects on the outcomes. Thus, context-specific approaches are necessary when predicting and managing the impacts of dams on transboundary flow.

• 디지털산업정보학회논문지
• /
• 제5권3호
• /
• pp.87-98
• /
• 2009

This paper discuss secure information flow analysis and its visualization. Information leak is defined as existence of information flow from variables which have user's private informations to variables that anyone can access. Secure information flow analysis has been made to decide of whether the information leak is or not. There are many researches for secure information flow analysis concerning high level programming languages. But actually, programs that user executes don't have program source code represented in high level programming language. Thus there is need for analysis of program represented in low level language. More to analysis, visualization of analysis is very important. So, this paper discuss visualization of secure information flow analysis. In this paper, Mini x86 Assembly Language which is subset of x86 assembly language is defined and secure information flow analysis of program is proposed. In addition, this paper defines transfer function that is used for analysis and shows how to visualize control flow graph.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2009년 추계학술대회논문집
• /
• pp.193-200
• /
• 2009

Recently, there have been efforts to construct hybrids among the existing methodologies for multiphase flow such as VOF, Level Set, and Front Tracking with the intention of facilitating simulations of general three-dimensional problems. As one of the hybrid method, we have developed the Level Contour Reconstruction Method (LCRM) for general three-dimensional multiphase flows including phase change. The main idea was focused on simplicity and a robust algorithm especially for the three-dimensional case. It combines characteristics of both Front Tracking and Level Set methods. While retaining an explicitly tracked interface using interfacial elements, the calculation of a vector distance function plays a crucial role in the periodic reconstruction of the interface elements in the LCRM method to maintain excellent mass conservation and interface fidelity. In addition, compact curvature formulation is incorporated for the calculation of the surface tension force thereby reducing parasitic currents to a negligible level.