• 한국소음진동공학회논문집
• /
• 제12권1호
• /
• pp.36-41
• /
• 2002

The cause and the elimination method for the chattering phenomena were investigated in a check valve attached to the exit of an auxiliary cooling water pump in a Korean nuclear powerplant. From the site experiment and the numerical calculation, the incident angle of the disk was so small that it was not able to produce the sufficient lifting force to overcome the gravitational component of the disk weight. Moreover, it turned out that the installation position was not symmetric for the secondary vortical flow generated inside the elbow so that the flow structure had strongly unstable flow characteristics. From this study, the tapping noise and the chattering phenomena were eliminated exactly by changing the incidence angle of the valve disk and the installation position of the calve body.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2000년도 춘계학술대회논문집
• /
• pp.1848-1853
• /
• 2000

Cause and the elimination method for the chattering phenomena were investigated the check valve attached exit of the auxiliary cooling water pump at a korean nuclear powerplant. From the site experiment and numerical calculation the incident angle of the disk was so small that it was not able to produce the lifting force to overcome the component of disk weight. Moreover, it turned out that the installed position was not symmetric for the secondary vortical flow generated inside the elbow, so that the flow structure had strongly unstable flow characteristics. From this technical support, the tapping noise and the chattering phenomena were eliminated exactly by changing the incidence angle of the valve disk and installed position of the check valve.

• 한국안전학회지
• /
• 제5권3호
• /
• pp.27-32
• /
• 1990

Standardization of solar collector test method is desirable for improvement solar collector quality and Valuation of collector thermal performance. In the present work, test loop proposed by Chun, is modified for convenience of test and obtained accurate collector thermal performance. An experimental investigation hat been carried out with a modified collector test loop under a real sun condition in order to confirm the utility of modified test loop and study the effect of variation of flow rate on thermal efficiency, the range of optimum flow rate and critical incident angle.

• 동력기계공학회지
• /
• 제4권4호
• /
• pp.32-40
• /
• 2000

A study on the fluid flow with ultrasonic forcing was carried out to get the enhancement of turbulence by laying emphasis on the ultrasonic incidence angles and reflectors. A large water tank was made of the transparent acrylic plates and city water of $25^{\circ}C$ was used as working fluid. 7 angles ($30^{\circ},\;45^{\circ},\;60^{\circ},\;90^{\circ},\;120^{\circ},\;135^{\circ},\;150^{\circ}$) as the ultrasonic incidence angle and 4 materials (wood, acryl, glass, iron) as the reflector were selected arid experiments for the above were made. The velocity vector distribution, kinetic energy and turbulence intensity of the turbulence flow fields enhanced by ultrasonic forcing were measured, compared and discussed by using the PIV measurement which was possible to measure the velocities of simultaneous multipoints. In results, it was cleared that the incidence angle of ultrasonic and material of reflector influenced the enhancement of turbulence.

• 대한기계학회논문집B
• /
• 제25권1호
• /
• pp.78-86
• /
• 2001

The Gasoline Direct Injection(GDI) system has been highlighted due to the improvement of fuel consumption and the control of exhaust emission from gasoline engines. The GDI system includes a high injection pressure, smaller mean diameter, good spray characteristics and stability. We were interested in the development for gasoline direct swirl injector(GDSI) in which the swirler is specially designed with an incident angle. Nymerical analysis was utilized to investigate the internal flow of GDSI with a goal to determine the swirl incident angle and needle lift. Accordingly, it describes characteristics of a GDSI in which the flowrate and spray characteristics are satisfied. especially the spray tip penetration decreases, compared with other type GDI, mean diameter of droplets is from 20${\mu}{\textrm}{m}$ to 25${\mu}{\textrm}{m}$ and spray angle ranges from 64$^{\circ}$to 66$^{\circ}$.

• 대한조선학회논문집
• /
• 제48권2호
• /
• pp.128-133
• /
• 2011

In the present study, the flow fields in between the propeller and the semi-spade rudder are investigated by using PIV technique to find out the influences of both simulated hull wake and propeller wake on the incident flow to the rudder. The velocity fields are measured at the propeller rotation angle of $180^{\circ}$ and the rudder deflection angles of $0^{\circ}$. Flow fields measured at each rudder deflection angle are analyzed in terms of angle-of-attack against the rudder leading edge. The hull wake increases the angle-of-attack more than that in the uniform inflow condition, forming the angle-of-attack of about $20^{\circ}$ at 0.7R(R=propeller radius) position. The distribution of the angle-of-attack is strongly affected by the stagnation point around the leading edge and camber effect of the rudder. These effects provide asymmetric distribution of angle-of-attack with respect to the leading edge of the rudder.

• EDISON SW 활용 경진대회 논문집
• /
• 제2회(2013년)
• /
• pp.431-436
• /
• 2013

본 연구에서는 정사각형으로 모델링 된 실린더 주위에 균일한 유동이 흐를 때, 나타나는 이차원 층류 유동을 분석하였다. EDISON_CFD를 이용하여 각도의 변화에 따른 사각 실린더의 박리점에 의한 주위 유동 현상을 해석하였다. 격자 분해능과 시간 간격에 따른 정확성을 분석하였다. 각도의 변화에 따른 정사각 실린더의 양력계수와 항력계수를 확인하였다. 또한 한 주기의 자료값을 평균한 유동에서 박리점의 위치 변화와 주 와흘림의 길이를 분석하였다.

• 대한기계학회논문집B
• /
• 제35권7호
• /
• pp.685-691
• /
• 2011

본 연구는 도플러 광 단층촬영법이 미세유동 및 미세구조를 동시에 측정하는 첨단 장비임을 보일뿐 아니라 기존의 도플러 광 단층촬영법의 한계를 극복한 새로운 방법을 제시하였다. 기존의 도플러 광단층촬영법은 샘플로 입사되는 광과 같은 방향의 속도성분만을 측정할 수 있다. 본 연구에서는 임의의 속도벡터의 세 성분을 동시에 측정할 수 있는 다관점 도플러 광 단층촬영법을 개발하였고 심전도 게이트를 사용하여 맥동혈류유동의 3 차원 공간 내에서 위상속도 벡터장을 측정하는 심전도 게이트 다관점 도플러 광 단층촬영법의 타당성 조사를 햄스터 모래주머니 모델을 사용하여 수행하였다. 이를 통해 측정 가능한 속도성분의 수를 증가할 뿐 아니라 프레임 레이트가 심박에 비해 상대적으로 느리기 때문에 발생하는 엘리아싱 문제를 해결하였다.

• 한국자동차공학회논문집
• /
• 제15권5호
• /
• pp.63-71
• /
• 2007

The conversion efficiency, durability and pressure drop of the automotive exhaust catalysts are dependent on the flow distribution within the substrate. Conventional porous medium approaches assuming monolith resistance based on the one-dimensional laminar flow for simulating the flow through the automotive exhaust catalysts over-predict the flow uniformity in the monolith. In this study, additional pressure loss is also considered by accounting for entrance effects due to the oblique flow incident on the front face of monolith as a consequence of flow separation and recirculation within the diffuser. The incorporation of an additional pressure loss improves the predictions for the maximum flow velocity within the substrate. An numerical study has also been conducted for the three-dimensional unsteady incompressible non-reacting flow inside various dual-monolith catalytic converters for the rapid acceleration/deceleration driving.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제12권1호
• /
• pp.501-517
• /
• 2020

Three-dimensional numerical simulations were performed to study the effects of flow direction and flow velocity on the flow regime behind a curved pipe represented by a curved circular cylinder. The cylinder is based on a previous study and consists of a quarter segment of a ring and a horizontal part at the end of the ring. The cylinder was rotated in the computational domain to examine five incident flow angles of 0-180° with 45° intervals at Reynolds numbers of 100 and 500. The detailed wake topologies represented by λ2 criterion were captured using a Large Eddy Simulation (LES). The curved cylinder leads to different flow regimes along the span, which shows the three-dimensionality of the wake field. At a Reynolds number of 100, the shedding was suppressed after flow angle of 135°, and oblique flow was observed at 90°. At a Reynolds number of 500, vortex dislocation was detected at 90° and 135°. These observations are in good agreement with the three-dimensionality of the wake field that arose due to the curved shape.