• Restorative Dentistry and Endodontics
• /
• 제33권4호
• /
• pp.405-412
• /
• 2008

본 연구의 목적은 여러 가지 계면조건의 변화를 통해서 layering시 복합레진 층간의 결합에 oxygen inhibition layer (OIL)가 필수적인지를 고찰해보는 것이다. 가로 $\times$ 세로 $\times$ 두께가 16 $\times$ 28 $\times$ 2.5 mm인 알루미늄판에 지름 3.7 mm의 구멍을 형성하여 몰드를 제작하고 다음과 같이 복합레진 (Z-250, 3M ESPE)을 충전하여 광중합하였다. 1 군: 하층판에 복합레진을 충전하고 광중합 한 후, 상층판을 접합하고 레진을 충전하여 광중합을 하였다 (OIL를 남김). 2 군: 하층판에 복합레진을 충전하고 광중합 한 후 acetone에 적신 cotton으로 문질러서 OIL를 제거하고 상층판을 접합하여 복합레진을 충전하고 광중합을 하였다 (OIL를 제거). 3 군: 하층판에 복합레진을 충전하고 Mylar strip을 접합하여 공기와의 접촉을 차단한 후 광중합을 하였다. Mylar strip을 제거하고 상층판을 접합 후 복합레진을 충전하여 광중합을 하였다 (OIL형성을 억제). 4 군: 하층판에 복합레진을 충전하고 광중합 한 후 glycerin을 OIL 표면에 도포하고 다시 광중합하였다. 상층판을 접합하여 복합레진을 충전하고 광중합을 하였다 (OIL를 중합). 5군 (대조군): 하층판과 상층판의 경계에 복합레진층의 계면이 위치하지 않도록 복합레진을 bulk충전하였다 (계면형성 없이 bulk 충전한 복합레진). 24 시간 100% 습도에서 보관 후 상층판과 하층판 사이의 계면 전단결합강도를 측정하고 파절 양상을 관찰하였다. 계면을 통한 중합과정의 확산을 관찰하기 위하여 제조한 광개시제가 들어있지 않은 실험적 복합레진 (Exp_Com)을 몰드에 충전하고 상부에 flowable 복합 레진 (Aelite Flow) 또는 접착레진 (ScotchBond Multipurpose)을 접촉시킨 후 광조사하였다. 몰드내의 미중합된 Exp_Com을 acetone bath 에서 5 분 동안 제거한 후 몰드내에 다시 Aelite Flow를 충전하고 광중합을 시행하였다. 경화된 복합레진 시편의 단면을 관찰하여 Exp_Com 층의 두께를 측정하였다. OIL를 배제하거나 중합시킨 2-4군은 OIL이 존재하는 1 군과 통계적으로 유의한 결합강도의 차이를 보이지 않았으며, Mylar strip을 이용하여 OIL의 생성을 억제했던 3군과 glycerin을 도포하여 OIL를 중합시킨 4군은 계면을 생성하지 않은 대조군인 5 군과도 통계적으로 유의한 차이를 보이지 않았다. 중합과정의 확산에 의해 중합개시제가 포함되지 않은 Exp_Com내에 중합된 층이 생겨난 것을 시각적으로 확인할 수 있었으며, Exp_Com의 중합층 두께는 flowable 레진의 경우 20.95 (0.90) um였고 접착레진의 경우 42.13 (2.09) 였다.

• 한국식품위생안전성학회지
• /
• 제19권1호
• /
• pp.12-18
• /
• 2004

1. 닭고기에서 4종의 플루오로퀴놀론계 합성항균제(ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin)를 액상추출법으로 추출하여 형광검출기와 HPLC를 이용하여 동시 정량 분석하는 방법을 확립하였으며 분석조건으로서 컬럼은 Symmetry Cl8(250${\times}$4.6 mm id, 5 $\mu\textrm{m}$), 이동상은 0.4% triethylamine 및 0.4% phospholic acid 수용액, methanol 및 acetonitrile 혼합용액(800: 100: 100, v/v/v)을 사용하였으며, 형광검출기는 여기파장 278 nm, 측정파장 456 nm으로 그리고 유속은 1.0 $m\ell$/min., 주입량은 50 ${\mu}\ell$로 하였다. 확립된 분석조건으로 측정한 ofloxacin, norfloxacin, ciprofloxacin, enrofloxacin 표준품의 표준곡선식에서 모두 상관계수 0.999이상의 양호한 직선성을 보였으며, 첨가한 닭고기의 크로마토그람에서도 각각의 물질별 분리시간대에 방해 피크 없이 양호한 분리도를 나타내었다. 0.05∼0.2 $\mu\textrm{g}$/g 첨가한 시료에서 평균 회수율은 ofloxacin 92.0∼95.4%, norflokacin 84.2∼87.3%, ciprofloxacin 78.3∼82.2%, enrofloxacin 91.3∼95.3%이었으며 변이계수(CV)는 2.7∼9.4%이었다. 4종의 동시분석법의 검출한계 및 정량한계는 각각 ofloxacin 23.5 ppb, 35.3 ppb, norfloxacin 3.4 ppb, 5.1 ppb, ciprofloxacin 3.0 ppb, 4.5 ppb, enrofloxacin 2.5 ppb, 3.8 ppb수준이었다. 2. 인천 지역에서 도축한 닭고기 총 1,523수를 EEC-4-plate법으로 검사한 결과 양성반응을 보인 닭고기는 15수(육계 10, 토종닭 5)였으며, HPLC를 이용한 정밀검사결과 육계 5수에서 ciprofloxacin이 불검출 ∼0.04 ppm, enrofloxacin이 0.01∼0.69 ppm수준으로 검출되었으며, 토종닭 5수에서는 ciprofloxacin이 0.02∼0.12 ppm, enrofloxacin이 0.36∼6.79 ppm수준으로 검출되었다.

• 설비공학논문집
• /
• 제22권7호
• /
• pp.492-507
• /
• 2010

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2009. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends of thermal and fluid engineering have been surveyed as groups of general thermal and fluid flow, fluid machinery and piping, and new and renewable energy. Various topics were covered in the field of general thermal and fluid flow such as an expander, a capillary tube, the flow of micro-channel water blocks, the friction and anti-wear characteristics of nano oils with mixtures of refrigerant oils, etc. Research issues mainly focused on the design of micro-pumps and fans, the heat resistance reliability of axial smoke exhaust fans, and hood systems in the field of fluid machinery and piping. Studies on ground water sources were executed concerning two well type geothermal heat pumps and multi-heat pumps in the field of new and renewable energy. (2) Research works on heat transfer area have been reviewed in the categories of heat transfer characteristics and industrial heat exchangers. Researches on heat transfer characteristics included the heat transfer in thermoelectric cooling systems, refrigerants, evaporators, dryers, desiccant rotors. In the area of industrial heat exchangers, researches on high temperature ceramic heat exchangers, plate heat exchangers, frosting on fins of heat exchangers were performed. (3) In the field of refrigeration, papers were presented on alternative refrigerants, system improvements, and the utilization of various energy sources. Refrigeration systems with alternative refrigerants such as hydrocarbons, mixed refrigerants, and $CO_2$ were studied. Efforts to improve the performance of refrigeration systems were made applying various ideas of suction line heat exchangers, subcooling bypass lines and gas injection systems. Studies on heat pump systems using unutilized energy sources such as river water, underground water, and waste heat were also reported. (4) Research trend in the field of mechanical building facilities has been found to be mainly focused on field applications rather than performance improvements. In the area of cogeneration systems, papers on energy and economic analysis, LCC analysis and cost estimating were reported. Studies on ventilation and heat recovery systems introduced the effect on fire and smoke control, and energy reduction. Papers on district cooling and heating systems dealt with design capacity evaluation, application plan and field application. Also, the maintenance and management of building service equipments were presented for HVAC systems. (5) In the field of architectural environment, various studies were carried to improve indoor air quality and to analyze the heat load characteristics of buildings by energy simulation. These studies helped to understand the physics related to building load characteristics and to improve the quality of architectural environment where human beings reside in.

• 설비공학논문집
• /
• 제21권12호
• /
• pp.715-732
• /
• 2009

This article reviews the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during 2008. It is intended to understand the status of current research in the areas of heating, cooling, ventilation, sanitation, and indoor environments of buildings and plant facilities. Conclusions are as follows. (1) Research trends in thermal and fluid engineering have been surveyed in the categories of general fluid flow, fluid machinery and piping, new and renewable energy, and fire. Well-developed CFD technologies were widely applied in developing facilities and their systems. New research topics include fire, fuel cell, and solar energy. Research was mainly focused on flow distribution and optimization in the fields of fluid machinery and piping. Topics related to the development of fans and compressors had been popular, but were no longer investigated widely. Research papers on micro heat exchangers using nanofluids and micro pumps were also not presented during this period. There were some studies on thermal reliability and performance in the fields of new and renewable energy. Numerical simulations of smoke ventilation and the spread of fire were the main topics in the field of fire. (2) Research works on heat transfer presented in 2008 have been reviewed in the categories of heat transfer characteristics, industrial heat exchangers, and ground heat exchangers. Research on heat transfer characteristics included thermal transport in cryogenic vessels, dish solar collectors, radiative thermal reflectors, variable conductance heat pipes, and flow condensation and evaporation of refrigerants. In the area of industrial heat exchangers, examined are research on micro-channel plate heat exchangers, liquid cooled cold plates, fin-tube heat exchangers, and frost behavior of heat exchanger fins. Measurements on ground thermal conductivity and on the thermal diffusion characteristics of ground heat exchangers were reported. (3) In the field of refrigeration, many studies were presented on simultaneous heating and cooling heat pump systems. Switching between various operation modes and optimizing the refrigerant charge were considered in this research. Studies of heat pump systems using unutilized energy sources such as sewage water and river water were reported. Evaporative cooling was studied both theoretically and experimentally as a potential alternative to the conventional methods. (4) Research papers on building facilities have been reviewed and divided into studies on heat and cold sources, air conditioning and air cleaning, ventilation, automatic control of heat sources with piping systems, and sound reduction in hydraulic turbine dynamo rooms. In particular, considered were efficient and effective uses of energy resulting in reduced environmental pollution and operating costs. (5) In the field of building environments, many studies focused on health and comfort. Ventilation. system performance was considered to be important in improving indoor air conditions. Due to high oil prices, various tests were planned to examine building energy consumption and to cut life cycle costs.

• 설비공학논문집
• /
• 제20권12호
• /
• pp.844-861
• /
• 2008

The papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering during the year of 2007 have been reviewed. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro nano fluid, micropump and fuel cell. Traditional CFD was still popular and widely used in research and development. Studies about fans and pumps were performed in the field of fluid machinery. Characteristics of flow and fin shape optimization are studied in the field of piping system. (2) The research works on heat transfer have been reviewed in the field of heat transfer characteristics, heat exchangers, and desiccant cooling systems. The research on heat transfer characteristics includes thermal transport in pulse tubes, high temperature superconductors, ground heat exchangers, fuel cell stacks and ice slurry systems. For the heat 'exchangers, the research on pin-tube heat exchanger, plate heat exchanger, condensers and gas coolers has been cordially implemented. The research works on heat transfer augmenting tubes have been also reported. For the desiccant cooling systems, the studies on the design and operating conditions for desiccant rotors as well as performance index are noticeable. (3) In the field of refrigeration, many papers were presented on the air conditioning system using CO2 as a refrigerant. The issues on the two-stage compression, the oil selection, and the appropriate oil charge were treated. The subjects of alternative refrigerants were also studied steadily. Hydrocarbons, DME and their mixtures were considered and various heat transfer correlations were proposed. (4) Research papers have been reviewed in the field of building facilities by grouping into the researches on heat and cold sources, air conditioning and air cleaning, ventilation and fire research including tunnel ventilation, flow control of piping system, and sound research with drain system. Main focuses have been addressed to the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies were mostly focused on analyzing the indoor environment in various spaces like cars, old tombs, machine rooms, and etc. in an architectural environmental field. Moreover, subjects of various fields such as the evaluation of noise, thermal environment, indoor air quality and development of energy analysis program were researched by various methods of survey, simulation, and field experiment.

• 설비공학논문집
• /
• 제19권1호
• /
• pp.94-131
• /
• 2007

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigerating Engineering in 2004 and 2005 has been done. Focus has been put on current status of research in the aspect of heating, cooling, air-conditioning, ventilation, sanitation and building environment. The conclusions are as follows. (1) Most of fundamental studies on fluid flow were related with heat transportation of facilities. Drop formation and rivulet flow on solid surfaces were interesting topics related with condensation augmentation. Research on micro environment considering flow, heat, humidity was also interesting for comfortable living environment. It can be extended considering biological aspects. Development of fans and blowers of high performance and low noise were continuing topics. Well developed CFD and flow visualization(PIV, PTV and LDV methods) technologies were widely applied for developing facilities and their systems. (2) The research trends of the previous two yews are surveyed as groups of natural convection, forced convection, electronic cooling, heat transfer enhancement, frosting and defrosting, thermal properties, etc. New research topics introduced include natural convection heat transfer enhancement using nanofluid, supercritical cooling performance or oil miscibility of $CO_2$, enthalpy heat exchanger for heat recovery, heat transfer enhancement in a plate heat exchanger using fluid resonance. (3) The literature for the last two years($2004{\sim}2005$) is reviewed in the areas of heat pump, ice and water storage, cycle analysis and reused energy including geothermal, solar and unused energy). The research on cycle analysis and experiments for $CO_2$ was extensively carried out to replace the Ozone depleting and global warming refrigerants such as HFC and HCFC refrigerants. From the year of 2005, the Gas Engine Heat Pump(GHP) has been paid attention from the viewpoint of the gas cooling application. The heat pipe was focused on the performance improvement by the parametric analysis and the heat recovery applications. The storage systems were studied on the performance enhancement of the storage tank and cost analysis for heating and cooling applications. In the area of unused energy, the hybrid systems were extensively introduced and the life cycle cost analysis(LCCA) for the unused energy systems was also intensively carried out. (4) Recent studies of various refrigeration and air-conditioning systems have focused on the system performance and efficiency enhancement. Heat transfer characteristics during evaporation and condensation are investigated for several tube shapes and of alternative refrigerants including carbon dioxide. Efficiency of various compressors and expansion devices are also dealt with for better modeling and, in particular, performance improvement. Thermoelectric module and cooling systems are analyzed theoretically and experimentally. (5) According to the review of recent studies on ventilation systems, an appropriate ventilation systems including machenical and natural are required to satisfied the level of IAQ. Also, an recent studies on air-conditioning and absorption refrigeration systems, it has mainly focused on distribution and dehumidification of indoor air to improve the performance were carried out. (6) Based on a review of recent studies on indoor environment and building service systems, it is noticed that research issues have mainly focused on optimal thermal comfort, improvement of indoor air Quality and many innovative systems such as air-barrier type perimeter-less system with UFAC, radiant floor heating and cooling system and etc. New approaches are highlighted for improving indoor environmental condition as well as minimizing energy consumption, various activities of building control and operation strategy and energy performance analysis for economic evaluation.

• 한국식품조리과학회지
• /
• 제19권2호
• /
• pp.195-209
• /
• 2003

노인에게 제공하기 위하여 영양이 우수하고 동시에 노인의 기호도가 높은 표고고기전, 갈치조림 및 더덕구이를 선정하여 가정배달급식을 위한 음식의 생산 및 배송단계에 HACCP system을 적용하여 설정한 단계별로 소요시간, 온도상태 측정 및 미생물 품질검사를 모의로 실시한 결과는 다음과 같다. 1. 생산 및 배송단계에서 시간 및 온도 측정 결과, 냉각단계의 실내온도는 표고고기전과 더덕구이가 19.2~20.$0^{\circ}C$, 갈치조림이 24.0~25.2$^{\circ}C$로 위험온도범위에 노출되어 잠재적인 위험이 제기되었다. 2. 생산 및 배송단계에서 미생물 검사 결과, 원재료인 표고, 갈치, 무우 및 더덕에서 포도상구균이 생재료의 허용한계치를 초과하였고, 조리직후부터 배송까지의 표준평판균수는 기준치 이하로 검출되었으나, 냉각 및 포장단계에서 유의적인 증가를 보였다. 대장균군수는 생재료 및 급식단계 음식의 기준치보다 훨씬 낮았으며, 배송단계에서는 전혀 검출되지 않았다. 포도상구균은 표고고기전에서는 전반적으로 극히 낮은 수준으로 검출되었고, 갈치조림과 더덕구이에서는 포장단계에서 wrap 포장처리구만이 허용한계치를 초과한 31CFU/g가 검출되었으나, 보관 및 배송단계를 거치면서 감소하여 극히 낮아졌다. 한편, Sal. spp. V. parahaemolyticus, E. coli O157:H7, L. monocytogenes는 모두 검출되지 않았다. 3. 규명된 중점관리점은 표고고기전에서는 원재료의 구입과 검수, 냉각 및 포장단계였고, 갈치조림 및 더덕구이에서는 모두 원재료, 전처리, 냉각 및 포장단계였다. 따라서 가정배달급식의 생산단계에서의 중점관리점에 대한 통제방안으로 검수기준의 명확화, 냉각기의 구비와 자동포장기기의 설치가 이루어져야 하겠다. 또한 노인을 대상으로 한 가정배달급식에서는 노인들의 영양과 기호도를 고려하여 좀 더 다양한 음식을 선정하여, HACCP가 적용된 표준레시피를 개발하며, 생산 및 배송단계에 걸쳐 보다 실용적이고 위생적인 품질보존 방안을 마련하여 면역성이 저하된 노인들에게 위생적으로 안전하며 관능적으로도 만족할 수 있는 음식을 제공하여야 하겠다.

• 설비공학논문집
• /
• 제20권6호
• /
• pp.427-446
• /
• 2008

A review on the papers published in the Korean Journal of Air-Conditioning and Refrigeration Engineering in 2006 has been accomplished. Focus has been put on current status of research in the aspect of heating, cooling, ventilation, sanitation and building environments. The conclusions are as follows. (1) The research trends of fluid engineering have been surveyed as groups of general fluid flow, fluid machinery and piping, etc. New research topics include micro heat exchanger and siphon cooling device using nano-fluid. Traditional CFD and flow visualization methods were still popular and widely used in research and development. Studies about diffusers and compressors were performed in fluid machinery. Characteristics of flow and heat transfer and piping optimization were studied in piping systems. (2) The papers on heat transfer have been categorized into heat transfer characteristics, heat exchangers, heat pipes, and two-phase heat transfer. The topics on heat transfer characteristics in general include thermal transport in a cryo-chamber, a LCD panel, a dryer, and heat generating electronics. Heat exchangers investigated include pin-tube type, plate type, ventilation air-to-air type, and heat transfer enhancing tubes. The research on a reversible loop heat pipe, the influence of NCG charging mass on heat transport capacity, and the chilling start-up characteristics in a heat pipe were reported. In two-phase heat transfer area, the studies on frost growth, ice slurry formation and liquid spray cooling were presented. The studies on the boiling of R-290 and the application of carbon nanotubes to enhance boiling were noticeable in this research area. (3) Many studies on refrigeration and air conditioning systems were presented on the practical issues of the performance and reliability enhancement. The air conditioning system with multi indoor units caught attention in several research works. The issues on the refrigerant charge and the control algorithm were treated. The systems with alternative refrigerants were also studied. Carbon dioxide, hydrocarbons and their mixtures were considered and the heat transfer correlations were proposed. (4) Due to high oil prices, energy consumption have been attentioned in mechanical building systems. Research works have been reviewed in this field by grouping into the research on heat and cold sources, air conditioning and cleaning research, ventilation and fire research including tunnel ventilation, and piping system research. The papers involve the promotion of efficient or effective use of energy, which helps to save energy and results in reduced environmental pollution and operating cost. (5) Studies on indoor air quality took a great portion in the field of building environments. Various other subjects such as indoor thermal comfort were also investigated through computer simulation, case study, and field experiment. Studies on energy include not only optimization study and economic analysis of building equipments but also usability of renewable energy in geothermal and solar systems.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.14-20
• /
• 2018

전기자동차는 가솔린 자동차와는 달리 배출가스가 없어 친환경 차량을 대표하지만, 장착된 축전지에 충전된 전기로 구동되기 때문에, 1회 충전으로 갈 수 있는 거리가 전지의 에너지 밀도에 의해 좌우된다. 따라서 높은 에너지 밀도를 갖는 리튬이온 전지가 전기자동차용 전지로 유력한 후보이다. 리튬이온 전지의 효율을 지배하는 중요한 구성품은 전극이므로 전극 제조공정은 리튬이온 전지 전체 생산 공정에서 중요한 역할을 한다. 특히 전극의 제조 공정 중 코팅 공정은 성능에 큰 영향을 미치는 매우 중요한 공정이다. 본 논문에서는 전극 제조에서 코팅 공법의 효율성 및 생산성 증대를 위한 혁신적인 공정을 제안하고, 장비 설계 방법 및 개발 결과에 대하여 기술하였다. 구체적으로, 극판 핵심 코팅 품질 25% Upgrade 기술, 제품 고출력/고용량화 에 따른 조립 마진 감소 대응 가능 기술, 그리고 제품 용량 품질 및 조립 공정 수율 향상 기술들에 대한 설계 절차 및 개발방법을 제시하였다. 결과로 리튬이온 배터리의 셀의 제품 수명 개선 효과를 확보 하였다. 기존의 코팅 공정과 비교할 때 양극 용량 유지 위해 Target Loading Level 유지, 산포를 향상시켰다(${\pm}0.4{\rightarrow}{\pm}0.3mg/cm^2r$감소).

• 대한지역사회영양학회지
• /
• 제12권5호
• /
• pp.617-629
• /
• 2007

To ensure the microbiological safety of food items prepared after cooking process, this study was aimed to identify the hazards related with cooked foods donated to foodbanks through quantitative microbial analysis. Five foodbanks located in Incheon and Gyeonggi area among government-dominant foodbanks were surveyed from February to June, 2007. Manager, recipient, donator, type and quantity of donated foot and facility and equipment were examined for the general characteristics of foodbank. The time and temperature of food md environment were measured at steps from after-production to before-distribution, and the microbial analysis was performed mainly with indicator organism and major pathogens. The amount of cooked foods donated to each foodbank was about 20 to 30 servings and consisted of 80% of total donated foods. Only three foodbanks had separate offices for foodbank operation and four institutions had at least one temperature-controlled vehicle. The flow of donated foods was gone through the steps; production, meal service and holding at donator, collection by foodbank, transport (or holding after transport) and distribution to recipients. It took about 3.8 to 6.5 hours at room temperature from after-production to before-distribution. Only aerobic plate counts (APC) and coliforms were found in microbial analysis. The APC after production were relatively high in $8.2{\times}10^5,\;7.4{\times}10^5,\;6.9{\times}10^5$ and $4.2{\times}10^5 CFU/g$ while $2.8{\times}10^6, \;9.4{\times}10^5,\;1.0{\times}10^6$ and $5.4{\times}10^5CFU/g$ before distribution in mixed Pimpinella brachycarpa, mixed chard mixed amaranth and mixed spinach, respectively. The levels of coliforms in mixed chard and mixed spinach were complied with the standards of the Ministry of Education and Human Resources Management The level of APC in boiled pork was increased from $< 1.0{\times}10 CFU/g$ to $4.0{\times}10^2 CFU/g$. One of delivery vessels was shown $6.2{\times}10^3 CFU/100 cm^2$ in APC, which was over the standards for environment. One of serving tables also showed the high level of $1.2{\times}10^3 CFU/100 cm^2$ in APC and $6.6{\times}10^2 CFU/100 cm^2$ in coliforms. These results suggest the sanitary management of holding at donator and the time-temperature control are key factors to ensure the safety of cooked foods donated to foodbank.