• 한국항공우주학회지
• /
• 제45권10호
• /
• pp.817-824
• /
• 2017

꼬리날개 조종 유도무기의 주날개-꼬리날개 간섭 현상에 대한 연구를 수행하였다. 풍동시험 데이터를 이용하여 주날개-꼬리날개 간섭 정도를 산출하였으며 날개간의 간섭 현상이 전체 공력에 미치는 영향을 분석하였다. 성분 시험 결과를 이용하여 downwash angle을 산출하였으며 날개간의 간섭 영향을 받음각에 대한 비율로 나타내었다. 날개간의 간섭현상 발생 시 유동 특성을 살펴보기 위해 수치해석을 실시하였으며 받음각에 대한 vorticity 특성을 비교하였다. 실험적, 수치적 연구를 통해 주날개-꼬리날개 간섭현상이 유도무기의 정안정성에 큰 영향을 미침을 확인하였다.

• 한국자동차공학회논문집
• /
• 제18권5호
• /
• pp.115-123
• /
• 2010

Cool-down performance after soaking is important because it affects passenger's thermal comfort. The cooling capacity of HVAC system determines initial cool down performance in most cases, the performance is also affected by location, and shape of panel vent, indoor seat arrangement. Therefore, optimal indoor designs are required in developing a new car. In this paper, initial cool down performance is predicted by CFD(computational fluid dynamics) analysis. Experimental time-averaging temperature data are used as inlet boundary condition. For more reliable analysis, real vehicle model and human FE model are used in grid generation procedure. Thermal and aerodynamic characteristics on re-circulation cool vent mode are investigated using CFX 12.0. Thermal comfort represented by PMV(predicted mean vote) is evaluated using acquired numerical data. Temperature and velocity fields show that flow in passenger's compartment after soaking is considerably unstable at the view point of thermodynamics. Volume-averaged temperature is decreased exponentially during overall cool down process. However, temperature monitored at different 16 spots in CFX-Solver shows local variation in head, chest, knee, foot. The cooling speed at the head and chest nearby panel vent are relatively faster than at the knee and foot. Horizontal temperature contour shows asymmetric distribution because of the location of exhaust vent. By evaluating the passenger's thermal comfort, slowest cooling region is found at the driver's seat.

• 한국수정란이식학회지
• /
• 제22권3호
• /
• pp.173-178
• /
• 2007

돼지 정자의 성 선별에는 일반적으로 유속 세포 분석기를 이용한다. 유속 세포 분석은 DNA량의 차이에 기초하여 정자를 분리하는 기술로써 X 정자와 Y 정자를 90% 정확도로 분리할 수 있다. 그러나 이러한 유속 세포분석 기술은 정자의 손상을 야기해 정자의 기능과 수정능에 영향을 미치므로, 본 연구에서는 특정한 핵산 서열을 탐지할 수 있는 Chromogenic in situ hybridization(CISH)을 그와 비교하여 평가하였다. 유속 세포 분석을 수행하기 위해 정자를 SYBR 14와 PI로 염색하였고, histogram, dotplot, density, contour를 측정하였다. Y 염색체 특이적인 primer를 이용한 PCR로 유속 세포 분석의 정확도를 검사하였다. HRP/DAB 시스템에 기초한 CISH 분석에는 X 또는 Y 염색체에 상보적으로 결합하는 probe가 사용되었다. CISH 분석은 기존의 방법들보다 빠르고 쉬우며 비용이 적게 든다는 장점이 있다. 또한, CISH는 보다 정화한 정자의 선별을 가능하게 하는 것으로 나타났다. 본 연구에 따르면 CISH가 기존의 선별 방법들을 평가하는 기술로서만이 아니라 특정한 성별을 가진 포유동물의 생산에도 사용될 수 있을 것이다.

• 한국재료학회지
• /
• 제21권2호
• /
• pp.95-99
• /
• 2011

The microstructure and Cu diffusion barrier property of Ta-Si-N films for various Si and N compositions were studied. Ta-Si-N films of a wide range of compositions (Si: 0~30 at.%, N: 0~55 at.%) were deposited by DC magnetron reactive sputtering of Ta and Si targets. Deposition rates of Ta and Si films as a function of DC target current density for various $N_2/(Ar+N_2)$ flow rate ratios were investigated. The composition of Ta-Si-N films was examined by wavelength dispersive spectroscopy (WDS). The variation of the microstructure of Ta-Si-N films with Si and N composition was examined by X-ray diffraction (XRD). The degree of crystallinity of Ta-Si-N films decreased with increasing Si and N composition. The Cu diffusion barrier property of Ta-Si-N films with more than sixty compositions was investigated. The Cu(100 nm)/Ta-Si-N(30 nm)/Si structure was used to investigate the Cu diffusion barrier property of Ta-Si-N films. The microstructure of all Cu/Ta-Si-N/Si structures after heat treatment for 1 hour at various temperatures was examined by XRD. A contour map that shows the diffusion barrier failure temperature for Cu as a function of Si and N composition was completed. At Si compositions ranging from 0 to 15 at.%, the Cu diffusion barrier property was best when the composition ratio of Ta + Si and N was almost identical.

• 한국CDE학회논문집
• /
• 제12권2호
• /
• pp.137-145
• /
• 2007

This paper concerns about residential environment analysis program implementation for design and analysis on public housing complexes such that view and daylight analysis processes are automated and integrated into existing design routine to achieve better design efficiency. Considering the architectural design trends this paper chooses ArchiCAD as a platform for a CAD system, which contains the concepts such as integrated object-oriented CAD, virtual building and BIM. Residential environment analysis system consists of three components. The first component is the 3D modeling part defining 3D form information for external geographic contour models, site models and interior/exterior of apartment buildings. The second is the parametric library part handling the design parameters for view and daylight analysis. The last is the user interface for the input/output and integration of data for the environment analysis. Daylight analysis shows rendered images as well as results of daylight reports and grades per time and performs the calculations for floor shadow. It separates the site-only analysis from the analysis of site and exterior environmental parameters. View analysis considers horizontal and vertical view angles to produce view image from each unit and uses the bitmap analysis method to determine opening ratio, scenery ratio and void ratio. We could expect better performance and precision from this residential environment analysis system than the existing 2D drawing based view and daylight analysis methods and overcome the existing one-way flow of design information from 3D form to analysis reports so that site design modifications are automatically reflected on analysis results. Each part is developed in a module so that further integration and extension into other related estimation and construction management systems are made possible.

• 농업과학연구
• /
• 제37권3호
• /
• pp.435-449
• /
• 2010

Soils in the sloping uplands in Korea are subject to intensive land use with high input of agrochemicals and are vulnerable to soil erosion. Development of the environmentally sound land management strategy is essential for a sustainable production system in the sloping upland. This report addresses the status of upland agriculture and the best management practices for the uplands toward the sustainable agriculture. More than 60% of Korean lands are forest and only 21% are cultivating paddy and upland. Uplands are about 7% of the total lands and about 62% of the uplands are in the slopes higher than 7%. Due to the site-specificity of the upland, many managerial and environmental problems are occurring, such as severe erosion, shallow surface soils with rocky fragments, and loadings of non-point source (NPS) contaminants into the watershed. Based on the field trials, most of the sloping uplands were classified as Suitability Class III-V and the major limiting factor was slope and rock fragments. Due to this, soils were over-applied with N fertilizer, even though N rate was the recommendation. This resulted in decreases in yield, degradation of soil quality and increases in N loading to the leachate. Various case studies drew management practices toward sustainable production systems. The suggested BMP on the managerial, vegetative, and structural options were to practice buffer strips along the edges of fields and streams, winter cover crop, contour and mulching farming, detention weir, diversion drains, grassed waterway, and slope arrangement. With these options, conservation effects such as reductions in raindrop impact, flow velocity, runoff and sediment loss, and rill and gully erosion were observed. The proper management practice is a key element of the conservation of the soil and water in the sloping upland.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권2호
• /
• pp.855-860
• /
• 2014

Background: The purpose of this study was to assess the relationship between different sonographic features of papillary thyroid carcinoma (PTC) on high-frequency ultrasound and cervical lymph node metastasis (CLNM). Materials and Methods: We enrolled 548 patients who underwent initial surgery for PTC between May 2011 and December 2012 in our hospital at diagnosis. The sonographic features of 513 PTC nodules in 513 eligible patients, who had single PTC nodules in their thyroid glands, were retrospectively investigated. All patients with a suspect malignant nodule (d<0.5cm) among multiple nodules were initially diagnosed by fine-needle aspiration biopsy (FNAB) to ascertain if the suspect nodule was PTC. The final diagnosis of all the thyroid nodules and existence of CLNM were based on postoperative pathology. Patients were divided into two groups: a positive group with CLNM (224 nodules) and a negative group without CLNM (289 nodules). The following factors were investigated: gender, age, echogenicity, echotexture, size, shape, location, margin, contour, calcification morphology, distance between the nodule and pre- or post-border of the thyroid capsule, vascularity and the differences between the two groups. Results: Correlation analysis showed that shorter distances between the nodule and pre- or postborder of thyroid capsule resulted in greater risk of CLNM (Spearman correlation coefficient=-0.22, p<0.0001). The significant factors in multivariate analysis were age<45yrs, larger size (d>1cm), "wider than tall" shape, extrathyroid extension and mixed flow (internal and peripheral) (p<0.05, OR=0.406, 2.093, 0.461, 1.610, 1.322). Conclusions: Significant sonographic features of PTC nodules in preoperative high-frequency ultrasound are crucial for predicting CLNM.

• 융합신호처리학회논문지
• /
• 제17권1호
• /
• pp.32-39
• /
• 2016

지능형 교통 시스템(Intelligent Transportation System, ITS)은 첨단기술을 사용하여 도로의 상황을 판단하고 적절한 처리를 수행하므로 이상적인 차량의 흐름을 유도하는 시스템이다. 교통상황에 대한 정보는 다양한 지점에서 측정되고 관리되어야 하므로 주로 컴퓨터를 이용한 영상이 사용된다. 컴퓨터를 이용한 영상처리는 실시간으로 다양한 교통 파라미터를 수집하기 용이한 방법이고, 기술들도 점점 발전하고 있다. 지능형 교통 시스템의 교통 파라미터 중 차량 검출은 기본적으로 매우 중요한 기술이다. 이를 위해 영상의 배경 차를 이용한 검출방법, 에지를 이용한 윤곽선 추출 방법 등의 기술들이 사용되고 있으나 검출률의 정확도에 문제점이 제기되고 있다. 본 논문에서는 레이블링에 의한 차량검출과 감지선을 이용한 영상처리 방법으로 차량을 검출하였다. 제안된 방법의 정확도를 확인하기 위해 국도와 고속도로 등 두 곳의 장소에서 20개의 수직, 수평 방향 영상을 수집하여 차량 계수를 측정하였다. 그 결과 수직 방향 92%, 수평 방향 91.3%의 검출률을 얻었다.

• 한국추진공학회:학술대회논문집
• /
• 한국추진공학회 2004년도 제22회 춘계학술대회논문집
• /
• pp.165-172
• /
• 2004

LE-7A is the main engine of the H-IIA launch vehicle. Under its development, the nozzle suffered from two troubles during startup and shutdown transients of the engine. One is a large side load, which damages the actuator of the nozzle, and the other is damage on regenerative cooling tubes due to high heat load. It has been considered that these problems are caused by a peculiar separation pattern called Restricted Shock Separation (RSS). RSS is observed in several rocket nozzles, for example, LE-7A nozzle, Vulcain nozzle and so on. Their contours are not conventional truncated perfect (TP) nozzle - LE-7A nozzle is a compressed truncated perfect (CTP) nozzle and Vulcain nozzle is a thrust optimized (TO) nozzle. Although it is believed that the occurrence of RSS is affected by the nozzle contour, the mechanisms are not clarified sufficiently yet. In the present paper, a parametric numerical study is carried out to investigate the mechanisms of the occurrence of RSS in CTP nozzles during startup transient. The results show that RSS is caused by the adverse pressure gradient downstream of the Mach disk. The adverse pressure gradient is caused by the interaction of the pressure wave and Mach disk. The method to avoid the occurrence of RSS is also examined. A small step inside the nozzle affects the position of the separation point and prevents RSS. The result shows that the possibility that RSS can be suppressed by controlling the position of the separation point.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2163-2170
• /
• 2009

흉부 컴퓨터단층영상에서의 얻어진 폐 영상은 볼륨과 형태 등의 정량적인 정보들로서 진단과 수술 계획 등에 있어서 필연적 정보를 제공한다. 일반적인 영상분할은 이미지를 구성 요소영역이나 목적물에 따라 나누는 방법이다. 그러나 재분할을 하는 단계에서 최종영상은 에너지 최소화를 해결하는 정도에 의존하며, 분할은 응용대상의 관심 영역에서 객체나 물체의 경계에서 정지하게 된다. 가변형 능동모델은 컴퓨터 비젼, 영상처리 분야에서 광범위하게 사용되고 있다. 또한 영역 분할은 현재까지 많은 연구가 되고 있으며, Xu에 의해서 GVF라는 새로운 형태의 외부힘이 제안되고 있다. 본 논문에서 제안하는 알고리듬은 흉부 컴퓨터단층영상에서 실질을 자동 분할하기 위해서 에너지 최소화 방법을 사용하고, 영역분할을 위해 개선된 가변형 능동모델을 제안한다. 알고리듬은 정확한 영역분할을 위해서 기존 방법과 다른 개선된 외부힘을 정의하는 것이다. 임상의 실험은 흉부 컴퓨터단층영상에서 진단에 필요로 하는 폐 실질의 분할이 성공적인 결과를 나타내었다.