• 제목/요약/키워드: Flow coefficient

검색결과 3,290건 처리시간 0.032초

서남해 해상풍력 실증단지 해역의 해양 환경 특성 (Marine Environmental Characteristics around the Test Phase of Offshore Wind Farm in the Southwestern Coast of Yellow Sea)

  • 서진성;맹준호;임은표;진승주;김현민;김태윤
    • 환경영향평가
    • /
    • 제28권5호
    • /
    • pp.457-470
    • /
    • 2019
  • 서남해 해상풍력 실증단지 해역을 중심으로 구축된 모니터링 자료를 분석하여 해양물리, 해양수질, 해저퇴적물의 환경 특성을 파악하고 현황을 제시하였다. 파고와 부유사 농도, 유속과 부유사 농도의 상관관계를 분석하여 연구 해역 토사의 부유 특성을 고찰하였다. 춘계 시(1 개월) 파고와 부유사 농도 사이에는 상관계수 0.61~0.69의 상관성을 보였으며, 1 m 이상의 높은 파고가 발생하면 75 mg/L 이상의 부유사 농도가 관측되었다. 수질평가지수 산정 시 필요한 항목을 중심으로 수질 현황을 분석하였으며 대부분의 정점에서 1등급(매우 좋음)을 보이고 있었다. 클로로필-a의 변동폭이 다른 항목에 비해 상대적으로 높게 나타나 수질평가지수에 영향을 주는 중요 인자로 파악되었다. 해저퇴적물 내 중금속 현황은 모든 항목의 평균값이 해양환경 주의기준 이하로 검출되었으며 강열감량과 입도분포는 높은 연관성을 보였다.

경영자 능력과 경영자 보상의 관련성에 이익유연화가 미치는 조절효과 (Moderating effects of Income Smoothing on the relationship between managerial ability and manager compensation)

  • 이은주;황성준
    • 디지털융복합연구
    • /
    • 제19권12호
    • /
    • pp.321-329
    • /
    • 2021
  • 본 연구의 목적은 경영자 능력과 경영자 보상 사이의 관련성에 이익유연화가 미치는 효과에 초점을 두고 분석해 보고자 하였다. 경영효율성의 측정치인 DEA를 사용하여 경영자 능력에 대한 측정치를 도출하였으며, 이익유연화를 측정의 대리변수로 재량적 발생액과 비재량적발생액의 상관계수, 당기순이익 및 영업현금흐름의 표준편차를 사용하여 검증하였다. 또한 경영자 보상은 경영자 1인당 현금보상에 자연로그를 취하여 사용하였다. 가설검증을 위한 분석 기간은 2004년부터 2017년으로 실증분석결과 이익유연화 행위가 성과를 기반으로 한 보상은 감소시키며 성과를 통제한 경영자 보상은 증가시킨다는 결과를 제시하여 본 연구의 가설을 지지하는 결과로 나타났다. 이는 이익유연화에 대해서 차별적으로 추가적인 보상이 지급됨을 간접적으로 확인한 결과라고 할 수 있다. 본 연구는 경영자 능력과 경영자 보상간의 관련성에 이익유연화가 영향을 미치는 지를 실증적으로 분석하였다는데 연구의 공헌도가 있다. 그러나 다수의 선행연구에서 경영자 보상에는 상한과 하한 구간이 존재함을 실증 분석하였으나, 이익유연화로 인한 비대칭적 보상에 대하여 분석하지 못한 한계점이 존재하므로, 향후 연구에서 풍부한 실증결과를 바탕으로 연구가 확장되길 기대한다.

공급 우선순위를 고려한 MODSIM과 K-WEAP 모형의 비교 및 고찰 (Comparison and discussion of MODSIM and K-WEAP model considering water supply priority)

  • 오지환;김연수;류경식;조영식
    • 한국수자원학회논문집
    • /
    • 제52권7호
    • /
    • pp.463-473
    • /
    • 2019
  • 본 연구에서는 공급 우선순위에 따른 물수급 분석 결과의 비교를 위해 국내 수자원장기종합계획에서 활용한 K-WEAP (Korea-Water Evaluation And Planing System) 모형과 MODSIM (Modified SIMYLD) 모형을 이용하여 분석하였다. 기존의 수자원장기종합계획은 수요처의 공급 우선순위를 모두 동일하게 공급하는 것으로 가정하여 분석하였으며 K-WEAP은 최대충족률을 만족시키기 위한 비율 배분을 수행하는 반면 MODSIM은 물 공급 우선순위의 적용이 필수적인 것으로 분석되었다. 먼저 우선순위에 따른 한강 유역의 물수급 분석 결과, 평균 1,035 천 $m^3$의 물부족이 감소하였으며 이는 생 공용수의 배분량이 증가하면서 회귀수량이 증가하고, 수자원의 재이용이 많아지기 때문인 것으로 분석되었다. 우선순위를 적용한 K-WEAP과 MODSIM의 분석결과를 비교할 경우, 상대오차 최대 5.3%이내, 결정계수($R^2$)는 0.9999로 매우 유사한 물 부족이 발생하였다. 또한 두 모형 모두 합리적인 물 부족 분석 결과를 제공한다면, 모형의 구축과 데이터 처리에 해당하는 GUI 편의성은 K-WEAP이 더 우수한 것으로 나타났으나, 구동시간의 효율성은 MODSIM이 더 우수한 것으로 분석되었다. 향후 K-WEAP모형 뿐만 아니라 MODSIM 모형을 활용한 다양한 시나리오에 따른 분석을 수행할 수 있을 것으로 기대된다.

참당귀 지상부 추출물의 지표성분 decursin의 분석법 개발 및 검증 (Development and Validation of Analytical Method for Decursin in Aerial Parts of Angelica gigas Nakai Extract)

  • 김희연;이기연;김태희;박아름;노희선;김시창;안문섭
    • 한국식품위생안전성학회지
    • /
    • 제34권1호
    • /
    • pp.52-57
    • /
    • 2019
  • 본 연구에서는 건강기능성 식품 소재 개발을 목적으로 참당귀 지상부 추출물의 표준화를 위하여 decursin을 지표성분으로 선정하고 HPLC분석을 통하여 decursin의 분석법을 확립하고 유효성 검정을 수행하였다. 유효성 검정 결과, decorsin 표준용액과 참당귀 지상부 추출물의 retention time 및 spectrum이 일치하는 특이성을 확인하였다. 표준 검량선의 상관계수($R^2$)는 0.9994로 매우 우수한 직선성을 나타내었으며 정량한계(LOQ)는 $0.034{\mu}g/mL$이었고 검출한계(LOD)는 $0.011{\mu}g/mL$이었다. Decursin의 intra-day 분석에서 정확성 및 상대표준편차는 각각 96.49 ~ 104.35%, 0.53 ~ 1.10%, inter-day 분석에서 정확성 및 상대표준편차는 각각 97.23 ~ 100.14%, 0.26 ~ 1.15%인 것으로 나타나 본 시험법의 정확성 및 정밀성을 확인 할 수 있었다. 표준품 농도별 지표성분의 회수율은 92.38 ~ 104.11%의 범위였으며 분석오차 10% 이내로 측정되었다. 이는 본 연구에서 수행된 HPLC 분석법이 참당귀 지상부 추출물의 지표성분인 decursin을 분석하고 표준화하는데 적합한 시험법임을 의미한다.

상용차 하이브리드 냉방시스템 냉방 성능 특성 연구 (Experimental study on cooling performance characteristics of hybrid refrigeration system in a heavy duty vehicle)

  • 이호성;전한별;김정일;이무연
    • 한국산학기술학회논문지
    • /
    • 제20권1호
    • /
    • pp.419-425
    • /
    • 2019
  • 본 연구의 목적은 상용차 운행 시, 야간 및 운휴중에 냉방시스템을 운전하기 위하여서, 기계식과 전동식 압축기를 적용한 하이브리드 냉방시스템에 대한 냉방성능 특성을 분석하는 것이다. 기계식압축기는 170cc의 왕복동 형식이고, 전동식 압축기는 18cc 스크롤 형식이다. 전동식 압축기는 운휴시나 야간에 사용할 목적으로 적용되었기 때문에, 냉방용량은 기계식 압축기 대비 낮은 성능을 가지고 있다. 기계식 압축기를 사용하였을 경우, 6.0kW 수준의 냉방성능을 보이고 있고, 시스템 효율은 2.0이하의 결과를 가졌다. 반면, 전동식 압축기는 냉방성능 4.0kW수준, 시스템 효율은 3.5 수준을 가지고 있었다. 본 연구에서는 전동식 압축기는 냉방성능 4.0kW수준, 시스템 효율은 3.5 수준을 가지고 있었다. 기계식 압축기와 전동식 압축기를 운전조건에 따라서, 선택적으로 운전하는 것을 고려하였기 때문에, 운전모드가 바뀔 때의 시스템 특성을 분석하기 위하여서, 운전모드 변경에 대한 영향을 알아보았다. 운전모드가 변경될 때, 토출압력이 일시적으로 증가하는 경향을 보이는데, 안정적인 운전을 위하여서, 외기 부하 등을 고려한 운전모드 변경 로직에 대한 연구가 필요할 것으로 판단된다.

Diffusion Tensor-Derived Properties of Benign Oligemia, True "at Risk" Penumbra, and Infarct Core during the First Three Hours of Stroke Onset: A Rat Model

  • Chiu, Fang-Ying;Kuo, Duen-Pang;Chen, Yung-Chieh;Kao, Yu-Chieh;Chung, Hsiao-Wen;Chen, Cheng-Yu
    • Korean Journal of Radiology
    • /
    • 제19권6호
    • /
    • pp.1161-1171
    • /
    • 2018
  • Objective: The aim of this study was to investigate diffusion tensor (DT) imaging-derived properties of benign oligemia, true "at risk" penumbra (TP), and the infarct core (IC) during the first 3 hours of stroke onset. Materials and Methods: The study was approved by the local animal care and use committee. DT imaging data were obtained from 14 rats after permanent middle cerebral artery occlusion (pMCAO) using a 7T magnetic resonance scanner (Bruker) in room air. Relative cerebral blood flow and apparent diffusion coefficient (ADC) maps were generated to define oligemia, TP, IC, and normal tissue (NT) every 30 minutes up to 3 hours. Relative fractional anisotropy (rFA), pure anisotropy (rq), diffusion magnitude (rL), ADC (rADC), axial diffusivity (rAD), and radial diffusivity (rRD) values were derived by comparison with the contralateral normal brain. Results: The mean volume of oligemia was $24.7{\pm}14.1mm^3$, that of TP was $81.3{\pm}62.6mm^3$, and that of IC was $123.0{\pm}85.2mm^3$ at 30 minutes after pMCAO. rFA showed an initial paradoxical 10% increase in IC and TP, and declined afterward. The rq, rL, rADC, rAD, and rRD showed an initial discrepant decrease in IC (from -24% to -36%) as compared with TP (from -7% to -13%). Significant differences (p < 0.05) in metrics, except rFA, were found between tissue subtypes in the first 2.5 hours. The rq demonstrated the best overall performance in discriminating TP from IC (accuracy = 92.6%, area under curve = 0.93) and the optimal cutoff value was -33.90%. The metric values for oligemia and NT remained similar at all time points. Conclusion: Benign oligemia is small and remains microstructurally normal under pMCAO. TP and IC show a distinct evolution of DT-derived properties within the first 3 hours of stroke onset, and are thus potentially useful in predicting the fate of ischemic brain.

Y2O3와 Fe2O3가 포함된 LAS 계 결정화 유리 특성 (The properties of glass ceramic of LAS system with Y2O3 and Fe2O3)

  • 이지선;임태영;황종희;이영진;전대우;김선욱;라용호;김진호
    • 한국결정성장학회지
    • /
    • 제29권4호
    • /
    • pp.154-159
    • /
    • 2019
  • 용융 온도를 낮추고 균질화에 영향을 줄 수 있는 yttrium oxide(산화 이트륨)과 iron oxide(산화철)를 사용하여 $LI_2O-Al_2O_3-SiO_2$ 계 결정화 유리를 제조하였다. 조핵제는 Zirconium sulfate(황산지르코늄)을 사용했고, 유리 점도를 낮추기 위해 calcium phosphate(인산칼슘)을 사용해 유리 유동성을 원활하게 하였다. 결정화 유리는 열충격 $750^{\circ}C$ 이상을 만족했고, $800^{\circ}C$ 이상에서 열팽창계수가 급격하게 상승하는 온도를 약 $30^{\circ}C$ 이상 시프트 하였다. 따라서 yttrium oxide와 iron oxide 포함하는 LAS 계 유리는 고온에서 양호한 용융 상태와 우수한 열팽창 저항성을 확인하였고 특수 주방용 재료 분야에 충분히 활용이 가능하리라 판단되었다.

블록 크기 및 난류발생기 배치에 따른 수평채널내의 열전달 및 압력강하 특성에 관한 연구 (A Study on Heat Transfer and Pressure Drop Characteristics according to Block Size and Turbulence Generator's Placement in a Horizontal Channel)

  • 서규원;임종한;윤준규
    • 한국산학기술학회논문지
    • /
    • 제20권4호
    • /
    • pp.639-647
    • /
    • 2019
  • 최근 전자장비의 소형화 및, 고밀도화가 되는 반도체 집적기술의 발달로 인해 칩과 모듈에서 발생되는 내부발열량을 외부로 적절히 방출시키기 위해서 열 제어시스템 적용에 대한 연구의 중요성을 인식하고 있다. 본 연구는 SST k-${\omega}$ 난류모델을 적용하여 4개의 블록이 부착한 수평채널내에서 열전달 및 압력강하 특성을 고찰하였다. CFD 해석시 적용한 매개변수는 블록 폭, 블록 높이, 열원 및 난류발생기 배치이고, 해석시 기본 경계조건은 채널 입구의 온도 및 유속은 300 K, 3.84 m/s, 열유속은 $358W/m^2$으로 하였다. 그 결과로 블록 폭비율(w/h)이 증가할수록 열전달성능이 감소하는 반면에 블록 높이비(h/w)이 증가할수록 열전달특성은 증가하는 경향을 나타내었으며, 열원의 크기배열은 낮은 열유속에서 높은 열유속으로 증가시킬수록 열원의 영향을 받아 열전달계수는 증가하는 경향을 나타냈고, 난류발생기는 채널 입구에 가까운 블록 1번 위치의 상단에 설치했을 경우가 4개의 가열블록 전체에 가장 영향을 크게 미치게 되고, 압력강하특성을 고려할 때 가장 적절한 위치로 선정할 수 있었다.

수중 광량 모니터링을 통한 하절기 낙동강 본류 소광 특성 연구 (A Study on the Light Extinction Characteristics in the Main Channel of Nakdong River by Monitoring Underwater Irradiance in Summer)

  • 강미리;민중혁;최정규;박수영;신창민;공동수;김한순
    • 한국물환경학회지
    • /
    • 제34권6호
    • /
    • pp.632-641
    • /
    • 2018
  • Algal dynamics is controlled by multiple environmental factors such as flow dynamics, water temperature, trophic level, and irradiance. Underwater irradiance penetrating from the atmosphere is exponentially decreased in water column due to absorption and scattering by water molecule and suspended particles including phytoplankton. As the exponential decrease in underwater irradiance affects algal photosynthesis, regulating their spatial distribution, it is critical to understand the light extinction characteristics to find out the mechanisms of algal dynamics more systematically. Despite the significance, the recent data have been rarely reported in the main stream areas of large rivers, Korea. In this study, the euphotic depths and light extinction coefficients were determined by monitoring the vertical variation of underwater irradiance and water quality in the main channel of Nakdong River near Dodong Seowon once a week during summer of 2016. The average values of euphotic depth and light extinction coefficient were 4.0 m and $1.3m^{-1}$, respectively. The degree of light extinction increased in turbid water due to flooding, causing an approximate 50 % decrease in euphotic depth. Also, the impact was greater than the self-shading effect during the periods of cyanobacterial bloom. The individual light extinction coefficients for background, total suspended solid and algal levels, frequently used in surface water quality modeling, were determined as $0.305m^{-1}$, $0.090m^{-1}/mg{\cdot}L^{-1}$, $0.013m^{-1}/{\mu}g{\cdot}L^{-1}$, respectively. The values estimated in this study were within or close to the ranges reported in literatures.

에폭시 수지가 적용된 유리섬유 복합재료의 극저온 환경 기계적 특성 분석을 통한 LNG CCS 적용성 평가 (Applicability Assessment of Epoxy Resin Reinforced Glass Fiber Composites Through Mechanical Properties in Cryogenic Environment for LNG CCS)

  • 염동주;방승길;정연제;김희태;박성보;김용태;오훈규;이제명
    • 대한조선학회논문집
    • /
    • 제58권4호
    • /
    • pp.262-270
    • /
    • 2021
  • Consumption of Liquefied Natural Gas (LNG) has increased due to environmental pollution; therefore, the need for LNG carriers can efficiently transport large quantities of LNG, is increased. In various types of LNG Cargo Containment System (CCS), Membrane-type MARK-III composed of composite materials is generally employed in the construction of an LNG carrier. Among composite materials in a Mark-III system, glass-fiber composites act as a secondary barrier to prevent the inner hull structure from leakage of LNG when the primary barrier is damaged. Nevertheless, several cases of damage to the secondary barriers have been reported and if damage occurs, LNG can flow into the inner hull structure, causing a brittle fracture. To prevent those problems, this study conducted the applicability assessment of composite material manufactured by bonding glass-fiber and aluminum with epoxy resin and increasing layer from three-ply (triplex) to five-ply (pentaplex). Tensile tests were performed in five temperature points (25, -20, -70, -120, and -170℃) considering temperature gradient in CCS. Scanning Electron Microscopy (SEM) and Coefficient of Thermal Expansion (CTE) analyses were carried out to evaluate the microstructure and thermos-mechanical properties of the pentaplex. The results showed epoxy resin and increasing layer number contributed to improving the mechanical properties over the whole temperature range.