• 한국농공학회:학술대회논문집
• /
• 한국농공학회 1998년도 학술발표회 발표논문집
• /
• pp.370-375
• /
• 1998

The objectives of this study are to evaluate the applicability of SCS TR-20 model for small ungauged watershed, to show the behavior of the model with variation of topography in watershed, and to evaluate the storage effect of paddy field for flood flow. For this purpose, simulated data from the model were compared with the observed flood data at two sites (HS#3, HS#4) in Balan watershed. From the comparison between simulated and observed data, it was found that the model is applicable to this watershed.

• 한국자동차공학회논문집
• /
• 제17권2호
• /
• pp.10-19
• /
• 2009

The working of diesel particulate filters(DPF) needs to periodically burn soot that has been accumulated during loading of the DPF. The prediction of the relation between an uniformity of gas velocity and soot regeneration efficiency with simulations helps to make design decisions and to shorten the development process. This work presents a comprehensive combined 'DOC+CDPF' model approach. All relevant behaviors of flow fluid are studied in a 3D model. The obtained flow fields in the front of DPF is used for 1D simulation for the prediction of the thermal behavior and regeneration efficiency of CDPF. Validation of the present simulation are performed for the axial and radial direction temperature profile and shows goods agreement with experimental data. The coupled simulation of 3D and 1D shows their impact on the overall regeneration efficiency. It is found that the flow non-uniformity may cause severe radial temperature gradient, resulting in degrading regeneration efficiency.

• 한국압력기기공학회 논문집
• /
• 제11권2호
• /
• pp.68-74
• /
• 2015

Time domain response analysis for vibro-impact nonlinear behavior of multi-span tube with loose supports was performed using commercial FEA code and user subroutine. Support geometry of multi-span tube with a finite gap is realistically modeled by analytical rigid surface. Model of hydrodynamic force is based on the Qusai-steady model which accounts for the inclined angle of relative flow velocity and time delay between flow force and resulting tube motion. During tube vibration from flow loading, impact and friction at the support location is simulated using commercial FEA code with master slave contact algorithm. Analysis results has reasonable agreement with those of references and test experience. Plan of further refinement of analysis model and future test verification is briefly introduced.

• Journal of Mechanical Science and Technology
• /
• 제17권7호
• /
• pp.1073-1082
• /
• 2003

Many researchers have investigated the blood flow characteristics through bileaflet mechanical heart valves using computational fluid dynamics (CFD) models. Their numerical approach methods can be classified into three types; steady flow analysis, pulsatile flow analysis with fixed leaflets, and pulsatile flow analysis with moving leaflets. The first and second methods have been generally employed for two-dimensional and three-dimensional calculations. The pulsatile flow analysis interacted with moving leaflets has been recently introduced and tried only in two-dimensional analysis because this approach method has difficulty in considering simultaneously two physics of blood flow and leaflet behavior interacted with blood flow. In this publication, numerical calculation for pulsatile flow with moving leaflets using a fluid-structure interaction method has been performed in a three-dimensional geometry. Also, pulsatile flow with fixed leaflets has been analyzed for comparison with the case with moving leaflets. The calculated results using the fluid-structure interaction model have shown good agreements with results visualized by previous experiments. In peak systole. calculations with the two approach methods have predicted similar flow fields. However, the model with fixed leaflets has not been able to predict the flow fields during opening and closing phases. Therefore, the model with moving leaflets is rigorously required for advanced analysis of flow fields.

• Korea-Australia Rheology Journal
• /
• 제12권2호
• /
• pp.135-141
• /
• 2000

The linear viscoelastic behavior of acrylonitrile-butadiene-styrene (ABS) polymers with different rubber content has been investigated in the frame of a linear viscoelastic model, which takes into account the inter-connectivity of the dispersed rubber particles. The model developed in our previous work has been shown to properly predict the low frequency plateau for the storage modulus, which is generally observed in polymer blends containing core-shell-type impact modifiers. In the present study, further experiments have been carried out on ABS polymers with different rubber content to verify the validity of our linear viscoelastic model. It has been found that our model describes quite properly the rheological behavior of ABS polymers with different rubber content, especially at low frequencies. The experimental data confirm that our model describes the rheological properties of rubber-modified thermoplastic polymers with strong adhesion at the particle/matrix interface more accurately than the Palierne model.

• 산업기술연구
• /
• 제20권A호
• /
• pp.73-82
• /
• 2000

This study was implemented to find an optimal model for wastewater treatment processes using PHOENICS(Parabolic, hyperbolic or Elliptic Numerical Integration Code Series) and ASM(Activated Sludge Model). PHOENICS is a general software based upon the laws of physics and chemistry which govern the motion of fluids, the stresses and strains in solids, heat flow, diffusion, and chemical reaction. The wastewater flow and removal efficiency of particle in two phase system of a grit chamber in wastewater treatment plant were analyzed to inquire the predictive aspect of the operational model. ASM was developed for a biokinetic model based upon material balance in complex activated sludge systems, which can demonstrate dynamic and spatial behavior of biological treatment system. This model was applied to aeration tank and settling chamber in Choonchun city, and the modeling result shows dynamic transport in aeration tank. PHOENCS and ASM could be contributed for the optimal operation of wastewater treatment plant.

• 대한기계학회논문집
• /
• 제19권8호
• /
• pp.2039-2050
• /
• 1995

The nonlinear low-Reynolds-number k..epsilon. model of park and Sung is extended to predict the turbulent heat transports in separated and reattaching flows. The equations of the temperature variance( $k_{\theta}$ and its dissipation rate(.epsilon.$_{\theta}$ are solved, in concert with the equations of the turbulent kinetic energy(k) and its dissiation rate(.epsilon). In the present model, the near-wall effect and the non-equilibrium effect are fully taken into consideration. The validation of the model is then applied to the turbulent flow behind a backward-facing step and the flow over a blunt body. The predicted results of the present model are compared and evaluated with the relevant experiments.

• Journal of applied mathematics & informatics
• /
• 제9권1호
• /
• pp.185-195
• /
• 2002

Previous research has shown that the flow of patients around departments of geriatric medicine and ex-patients in the community may be-modelled by the application of a mixed-exponential distribution. In this proper we considered a ave-compartment model using a continuous-time Markov process to describe the flow of patients. Using a M/ph/c queuing model, we present a way of optimizing the number of beds in order to maintain an acceptable delay probability a sufficiently low level. Finally, we constructed a Java computer simulation, using data from St George's Hospital, London.

• Ecology and Resilient Infrastructure
• /
• 제9권3호
• /
• pp.141-153
• /
• 2022

본 연구는 유목과 연행침식을 고려한 토석류 수치모형을 개발하여 2011년 발생한 우면산 산사태의 관측데이터를 기반으로 수치모의를 수행하였다. 토석류 모형개발을 위해 천수방정식 기반의 침수모형인 Nays2DFlood 모형에 혼합유사농도의 이송확산, 토석류 지면전단응력, 연행침식 모듈을 추가하였으며 유목생성과 유목거동 모의를 위해 입자법 기반의 유목동력학 모형을 결합하였다. 모의결과, 우면산 산사태로 인한 수심과 유속 및 토석류 체적을 양호하게 재현한 것으로 나타났으며, 유목을 반영한 모의에서 보다 더 정확한 재현성을 나타냈다. 따라서 본 연구의 결과는 현재 기후변화로 인해 토석류 피해가 증가하는 실정에 대응할 수 있는 피해저감방안 구축에 도움이 될 수 있을 것으로 기대된다.

• 한국정밀공학회지
• /
• 제12권12호
• /
• pp.91-99
• /
• 1995

An effort has been made to more accurately analyze the flow in the chip cavity, particularly to model the flow through the openings in the leadframe and correctly treat the thermal boundary condition at the leadframe. The theoretical analysis of the flow has been done by using the Hele- Shaw approximation in each cavity separated by a leadframe. The cross-flow through the openings in the leadframe has been incorporated into the Hele-Shaw formulation as a mass source term. The temperature of the leadframe has been calculated based on energy balance in the leadframe. The flow behavior in the leadframe has been verified experimentally. In the experiment, a transparent mold and clear fluid have been used for flow visualization. Comparisons were made between the calculation and experimental results which showed a good agreement.