• 한국항공우주학회지
• /
• 제34권10호
• /
• pp.7-15
• /
• 2006

스트레이크를 부착한 이중 삼각 날개에서 스트레이크의 붙임각이 날개면 압력분포와 와류 특성에 미치는 영향을 실험적으로 연구하였다. 스트레이크 붙임각의 음(-)방향 증가(스트레이크가 주 날개 윗면으로부터 pitch-down방향으로 부착된 상태)는 날개 전체의 받음각을 증가시키는 것과 같은 효과를 가져와 날개 윗면의 부압의 크기를 증가시켰다. 이러한 스트레이크 붙임각 변화에 의한 날개 윗면 부압 분포 변화는 와류의 강도 변화에 기인하기 보다는 와류 중심이 날개면에 가까이 위치하는 것에 기인하였다.

• 한국항해항만학회지
• /
• 제32권10호
• /
• pp.771-776
• /
• 2008

선박에서 제어판의 역할은 운동을 제어하는데 목적이 있으며 이는 곧 조종성능을 결정하는 중요한 요소이다. 본 연구에서는 플랩타의 성능평가를 위하여 $Re=3.0{\times}10^4$에서 영각에 대응하는 플랩각에 따른 속도 및 에너지 분포를 2-프레임 그레이레벨 상호상관 PIV기법을 이용하여 비교 분석하였다. 또한 영각 10도와 20도에서 전통적인 단동타의 유동특성과 비교하여 플랩타의 성능특성을 평가하였다. 영각 10도에서는 양력, 영각 20도에서는 항력에 의한 측압력을 향상시킬 수 있었다. 영각 10도에서 플랩조작만으로 박리점과 경계층영역의 변화가 가능하였다.

• 대한기계학회논문집B
• /
• 제38권12호
• /
• pp.1009-1015
• /
• 2014

본 연구는 NACA0012 천음속 에어포일 유동에 있어서 비평형 응축이 Force 계수(압력, 양력 및 항력계수)에 미치는 영향을 TVD 수치해석을 통하여 연구하였다. 정체점 온도 298 K, 받음각 ${\alpha}=3^{\circ}$인 경우, 주류 마하수 0.78~0.81에서는 정체점 상대습도의 증가함에 따라 양력은 단순 감소한다. 반면 Lift force break 마하수 영역의 주류 마하수에서는 정체점 상대습도의 증가에 따라 양력은 오히려 증가한다. 받음 각 ${\alpha}=3^{\circ}$, 정체점 상대습도가 0%인 경우, 주류 마하수의 증가에 따라 항력은 급격하게 증가하지만, 응축의 영향이 큰 60%인 경우에는 주류 마하수의 증가에 조금 증가할 뿐이다. 동일한 주류 마하수인 경우 비평형 응축에 따른 전 항력의 감소는 받음각과 정체점 상대습도가 증가할수록 크게 된다. 응축이 없는 ${\Phi}_0=0%$인 경우는 주류 마하수가 크고 받음각이 클수록 Wave drag은 크게 되나 응축의 영향이 비교적 큰 ${\Phi}_0=50%$ 이상인 경우는 오히려 Wave drag이 작아지는 것으로 나타났다. 한편, 정체점 상대습도가 낮고, 주류 마하수가 클수록 충격파 직전의 최대 마하수는 커지는 것으로 나타났다.

• 한국항공우주학회지
• /
• 제30권5호
• /
• pp.109-117
• /
• 2002

옆미끄럼이 있는 조건에서 LEX를 갖는 삼각날개의 와류 특성을 유동의 가시화에 의한 실험적 방법으로 연구하였다. 모델은 $65^{\circ}$ 후퇴각의 갖는 평판 날개이다. 자유 유동속도는 6.2 m/s이며, 이 속도와 날개뿌리 시위를 기준으로 한 레이놀즈 수는 $4.4\times10^5$ 이다. 받음각 범위와 옆미끄림각 범위는 각각 $16^{\circ}\sim28^{\circ}$와 $0^{\circ}\sim-15^{\circ}$ 이다. 미세수적과 레이저 평면광에 의한 가시화는 오공 프로브에 의한 측정으로부터 얻을 수 없었던 보다 자세한 와유동 구조를 관찰 할 수 있도록 하였다. 옆미끄럼각이 있는 경우, 바람쪽은 LEX 와류와 날개 와류의 상호작용과 붕괴가 촉진되는 반면, 바람반대쪽은 두 와류의 상호작용과 붕괴가 억제되었다.

• Wind and Structures
• /
• 제34권4호
• /
• pp.385-394
• /
• 2022

Global Warming has been driven majorly by the consumption of fossil fuels. Harnessing energy from wind is viable solution towards reducing carbon footprint created due to burning such fuels, However, wind turbines have their problems of flow separation and aerodynamic stall to tackle with. In an attempt to delay the stall angle and improve the aerodynamic characteristics of the NACA 0015 symmetrical aerofoil, lateral cylindrical ridges were attached to its suction surface, at chord positions ranging from 0.1c to 0.5c. The characteristics of the original and ridged aerofoils were obtained using simultaneous pressure readings taken in a wind tunnel, at a free stream Reynolds number of R_e = 2.81 × 10⁵ for a wide range of free stream angles of attack ranging from -45° to 45°. Depending on the ridge size, a delay in stall angle varying from 5° to 20° was achieved together with the maximum increase in lift in the post-stall phases. Additionally, efforts were made to identify the optimum position for each ridge.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제7권5호
• /
• pp.906-919
• /
• 2015

The Deep Draft Semi-Submersible (DDS) concepts are known for their favourable vertical motion performance. However, the DDS may experience critical Vortex-Induced Motion (VIM) stemming from the fluctuating forces on the columns. In order to investigate the current-induced excitation forces of VIM, an experimental study of flow characteristics around four square-section cylinders in a square configuration is presented. A number of column spacing ratios and array attack angles were considered to investigate the parametric influences. The results comprise flow patterns, drag and lift forces, as well as Strouhal numbers. It is shown that both the drag and lift forces acting on the cylinders are slightly different between the various L/D values, and the fluctuating forces peak at L/D = 4.14. The lift force of downstream cylinders reaches its maximum at around ${\alpha}=15^{\circ}$. Furthermore, the flow around circular-section-cylinder arrays is also discussed in comparison with that of square cylinders.

• 한국가시화정보학회지
• /
• 제19권3호
• /
• pp.106-114
• /
• 2021

In the present study, we investigate the flow characteristics of a paraglider canopy with leading-edge tubercles by performing force measurement and surface flow visualizations. The experiment is conducted at Re = 3.3×10⁵ in a wind tunnel, where Re is the Reynolds number based on the mean chord length and the free-stream velocity. The canopy model with leading-edge tubercles has flow characteristics of a two-step stall, showing an earlier onset of the first stall than the canopy model without leading-edge tubercles. However, the main stall angle of the tubercled model is much larger than that of the canopy model without tubercles, resulting in a higher aerodynamic performance at high angles of attack. The delay in the main stall is ascribed to the suppression of separation bubble collapse around the wingtip at high angles of attack.

• 한국가시화정보학회:학술대회논문집
• /
• 한국가시화정보학회 2004년도 Proceedings of 2004 Korea-Japan Joint Seminar on Particle Image Velocimetry
• /
• pp.15-23
• /
• 2004

The present study is aimed to achieve dynamic visualization from the in-house 3-D stereoscopic PIV to represent quantitative flow information such as time-resolved 3-D velocity distribution, vorticity, turbulent intensity or Reynolds stresses and so on. One of the application of the present study is Leading edge extension(LEX) flow appearing on modern delta wing aircraft. The other is mixing flow in stirring tank used in industry field. LEX in a highly swept shape applied to a delta wing features the modern air-fighters. The LEX vortices generated upon the upper surface of the wing at high angle of attack enhance the lift force of the delta wing by way of increased negative suction pressure over the surfaces. The present method resolves also the complicated flow patterns of two type impellers rotating in stirring vessel. Flow quantities such as three velocity vector components, vorticity and other flow information can be easily visualized via the 3D time-resolved post-processing visualization. And it makes the easy understanding of the unsteady flow characteristics of the typical industrial mixers.

• International Journal of Fluid Machinery and Systems
• /
• 제4권4호
• /
• pp.360-366
• /
• 2011

Thin circular-arc blade is often used as a guide vane, a deflecting vane, or a rotating blade of low pressure axial-flow turbomachine because of its easy manufacture. Ordinary design of the blade elements of these machines is done by use of the carpet diagrams for a cascade of circular-arc blades. However, the application of the carpet diagrams is limited to relatively low cambered blade operating under optimum inlet flow conditions. In order to extend the applicable range, additional design data is necessary. Computational fluid dynamics (CFD) is a promising method to get these data. In this paper, two-dimensonal cascade performances of circular-arc blade are widely analyzed with CFD. The results have been compared with the results of experiment and potential theory, and useful information has been obtained. Turning angle and total pressure loss coefficients are satisfactorily predicted for lowly cambered blade. For high camber angle of $67^{\circ}$, the CFD results agree with experiment for the angle of attack less than that for shockless inlet condition.

• Membrane and Water Treatment
• /
• 제8권5호
• /
• pp.423-435
• /
• 2017

Settling Basins are one of the most important and popular methods for removal of suspended sediments irrigation and drainage networks or power canals taking off from an alluvial river and wastewater treatment plant. Improving the performance and so increasing sediment removal efficiency of settling basins by an alternative method is necessary. In the present work, the effect of baffle and its angle of attack with the flow (${\theta}$) on the sediment removal efficiency is investigated by conducting a series of experiments on a straight canal with 8 m length, 0.3 m width and 0.5 m height and 3 m length of basin equipped with an adjustable glass baffle. A numerical analysis has been carried out using ANSYS Fluent 3D software (a general purpose computational fluid dynamics simulation tool) for three Froude numbers from the experiments. The numerical and experimental results were found to match reasonably well.