Browse > Article
http://dx.doi.org/10.12989/was.2022.34.4.385

Effect of stall delay characteristics of symmetrical aerofoil using lateral circular ridges  

Raatan, V.S. (Turbulence and Flow Control Laboratory, School of Mechanical Engineering, SASTRA Deemed University)
Ramaswami, S. (Turbulence and Flow Control Laboratory, School of Mechanical Engineering, SASTRA Deemed University)
Mano, S. (Turbulence and Flow Control Laboratory, School of Mechanical Engineering, SASTRA Deemed University)
Pillai, S. Nadaraja (Turbulence and Flow Control Laboratory, School of Mechanical Engineering, SASTRA Deemed University)
Publication Information
Wind and Structures / v.34, no.4, 2022 , pp. 385-394 More about this Journal
Abstract
Global Warming has been driven majorly by the consumption of fossil fuels. Harnessing energy from wind is viable solution towards reducing carbon footprint created due to burning such fuels, However, wind turbines have their problems of flow separation and aerodynamic stall to tackle with. In an attempt to delay the stall angle and improve the aerodynamic characteristics of the NACA 0015 symmetrical aerofoil, lateral cylindrical ridges were attached to its suction surface, at chord positions ranging from 0.1c to 0.5c. The characteristics of the original and ridged aerofoils were obtained using simultaneous pressure readings taken in a wind tunnel, at a free stream Reynolds number of Re = 2.81 × 105 for a wide range of free stream angles of attack ranging from -45° to 45°. Depending on the ridge size, a delay in stall angle varying from 5° to 20° was achieved together with the maximum increase in lift in the post-stall phases. Additionally, efforts were made to identify the optimum position for each ridge.
Keywords
cylindrical/circular ridges; flow separation; separation bubble;
Citations & Related Records
Times Cited By KSCI : 1  (Citation Analysis)
연도 인용수 순위
1 Shan, H., Jiang, L., Liu, C., Love, M. and Maines, B. (2008), "Numerical study of passive and active flow separation control over a NACA0012 airfoil", Comput. Fluids, 37(8), 975-992. https://doi.org/10.1016/j.compfluid.2007.10.010.   DOI
2 Sundaresan, A., Arunvinthan, S., Pasha, A.A. and Pillai, S.N. (2021), "Effect of Ice accretion on the aerodynamic characteristics of wind turbine blades", Wind Struct., 32(3), 205-217. https://doi.org/10.12989/was.2021.32.3.205.   DOI
3 Tao, W.U., Bifeng, S.O.N.G., Wenping, S.O.N.G., Wenqing, Y.A. N.G. and Zhonghua, H.A.N. (2020), "Aerodynamic performance enhancement for flapping airfoils by co-flow jet", Chinese J. Aeronaut, 33(10), 2535-2554. https://doi.org/10.1016/j.cja.2020.05.010.   DOI
4 Betterton, J. and Hackett, K. (2000), "Laser doppler anemometry investigation on sub boundary layer vortex generators for flow control", Appl. Laser, 1-13. http://ltces.dem.ist.utl.pt/lxlaser/lxlaser2000/papers/pdf/08_2.pdf.
5 Dhiliban, A., Meena, P., Narasimhan, P.S., Vivek, M., Pillai, S.N. and Parammasivam, K.M. (2013), "Aerodynamic performance of rear roughness Aerofoils", In Proc. 8th Asia-Pacific Conference on Wind Engineering, 193-200. https://doi.org/10.3850/978-981-07-8012-8_252.   DOI
6 Gao, L., Zhang, H., Liu, Y. and Han, S. (2015), "Effects of vortex generators on a blunt trailing-edge airfoil for wind turbines", Renew. Energy, 76, 303-311. https://doi.org/10.1016/j.renene.2014.11.043.   DOI
7 James, S.E., Suryan, A., Sebastian, J.J., Mohan, A. and Kim, H.D. (2018), "Comparative study of boundary layer control around an ordinary airfoil and a high lift airfoil with secondary blowing", Comput. Fluids, 164, 50-63. https://doi.org/10.1016/j.compfluid.2017.03.012.   DOI
8 Lin, J.C. (2002), "Review of research on low-profile vortex generators to control boundary-layer separation", Progress Aeros. Sci., 38(4-5), 389-420. https://doi.org/10.1016/S0376-0421(02)00010-6.   DOI
9 Shehata, A.S., Xiao, Q., Saqr, K.M., Naguib, A. and Alexander, D. (2017), "Passive flow control for aerodynamic performance enhancement of airfoil with its application in Wells turbine-under oscillating flow condition", Ocean Eng., 136, 31-53. https://doi.org/10.1016/j.oceaneng.2017.03.010.   DOI
10 Yang, K., Zhang, L. and Xu, J. (2010), "Simulation of aerodynamic performance affected by vortex generators on blunt trailing-edge airfoils", Sci. China Series E: Technol. Sci., 53(1), 1-7. https://doi.org/10.1007/s11431-009-0425-5.   DOI
11 Fouatih, O.M., Medale, M., Imine, O. and Imine, B. (2016), "Design optimization of the aerodynamic passive flow control on NACA 4415 airfoil using vortex generators", Europ. J. Mech.-B/Fluids, 56, 82-96. https://doi.org/10.1016/j.euromechflu.2015.11.006.   DOI
12 Zhen, T.K., Zubair, M. and Ahmad, K.A. (2011), "Experimental and numerical investigation of the effects of passive vortex generators on Aludra UAV performance", Chinese J. Aeronaut., 24(5), 577-5583. https://doi.org/10.1016/S1000-9361(11)60067-8.   DOI
13 Wong, C. and Kontis, K. (2007), "Flow control by spanwise blowing on a NACA 0012", J. Aircraft, 44(1), 337-340. https://doi.org/10.2514/1.25227.   DOI
14 Yousefi, K., Saleh, R. and Zahedi, P. (2014), "Numerical study of blowing and suction slot geometry optimization on NACA 0012 airfoil", J. Mech. Sci. Technol., 28(4), 1297-1310. https://doi.org/10.1007/s12206-014-0119-1.   DOI
15 Wang, H., Zhang, B., Qiu, Q. and Xu, X. (2017), "Flow control on the NREL S809 wind turbine airfoil using vortex generators", Energy, 118, 1210-1221. https://doi.org/10.1016/j.energy.2016.11.003.   DOI
16 Xue, S., Johnson, B., Chao, D., Sareen, A. and Westergaard, C. (2010), "Advanced aerodynamic modeling of vortex generators for wind turbine applications", Europ. Wind Energy Conference (EWEC), Warsaw Poland.
17 Li, Q.A., Maeda, T., Kamada, Y., Murata, J., Kawabata, T. and Furukawa, K. (2014), "Analysis of aerodynamic load on straight-bladed vertical axis wind turbine", J. Thermal Sci., 23(4), 315-324. https://doi.org/10.1007/s11630-014-0712-8.   DOI
18 Arunvinthan, S. and Nadaraja Pillai, S. (2019), "Aerodynamic characteristics of unsymmetrical aerofoil at various turbulence intensities", Chinese J. Aeronautic., 32(11), 2395-2407. https://doi.org/10.1016/j.cja.2019.05.014.   DOI
19 Bur, R., Coponet, D. and Carpels, Y. (2009), "Separation control by vortex generator devices in a transonic channel flow", Shock Waves, 19(6), 521-530. https://doi.org/10.1007/s00193-009-0234-6.   DOI
20 Chen, C., Seele, R. and Wygnanski, I. (2012), "Separation and circulation control on an elliptical airfoil by steady blowing", AIAA J., 50(10), 2235-2247. https://doi.org/10.2514/1.J051538.   DOI
21 Ganesh, N., Arunvinthan, S. and Nadaraja pillai, S. (2019), "Effect of surface blowing on aerodynamic characteristics of tubercled straight wing", Chinese J. Aeronaut., 32(5), 1111-1120. https://doi.org/10.1016/j.cja.2019.02.006.   DOI
22 Genc, M.S., Kaynak, u. And Yapici, H. (2011), "Performance of transition model for predicting low Re aerofoil flows without/with single and simultaneous blowing and suction", Europ. J. Mech.-B/Fluids, 30(2), 218-235. https://doi.org/10.1016/j.euromechflu.2010.11.001.   DOI
23 Huang, L., Huang, P.G., LeBeau, R.P. and Hauser, T. (2004), "Numerical study of blowing and suction control mechanism on NACA0012 airfoil", J. Aircraft, 41(5), 1005-1013. https://doi.org/10.2514/1.2255.   DOI
24 Jiao, Y. and Lu, Y. (2015), "Parameter optimization research on lift-enhancing of multi-element airfoil using air-blowing", Procedia Eng., 99, 73-81. https://doi.org/10.1016/j.proeng.2014.12.510.   DOI
25 Maeda, T., Kamada, Y., Murata, J., Furukawa, K. and Yamamoto, M. (2015), "Effect of number of blades on aerodynamic forces on a straight-bladed Vertical Axis Wind Turbine", Energy, 90, 784-795. https://doi.org/10.1016/j.energy.2015.07.115.   DOI