• Proceedings of the Korea Concrete Institute Conference
• /
• 1998.10c
• /
• pp.139-144
• /
• 1998

This study is intended to devolop the self waterproof agents for high performance concrete by analyzing the properties of fresh and hardened mortar with various addition ratios of the inorganic admixture and zinc stearate. As the results of the test, the flow and air content increase with the addition of expansive additives. When the replacement rate of silica fume increases, the flow decreases for the increased viscidity. And the flow and sir content decrease with the addition of zinc stearate. At hardened state, the compressive strength, tensile strength and flexual strength decrease with the addition of expansive additives and zinc stearate. With the increase of silica fume's replacement, they show a little decrease at early age and then increase gradually. Also, absorption and permeability show a steep decrease when zinc stearate is added, and a slack decrease with the replacement of silica fume.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.20 no.1
• /
• pp.115-130
• /
• 1995

This paper considers a single machine nonpreemptive scheduling problem with a given common due date. In the problem, the optimal job sequence is sought to minimize the sum of earliness/tardiness and flow time measures in the situation where all jobs are available at time zero, and weights per unit length of earliness/tardiness and flow time are V and W, respectively. Some dominant solution properties are characterized to deriva both an optimal starting time for an arbitrary sequence and sequence improvement rules. The optimal schedule is found to the case W .geq. V/. By the way, it is difficult to find the optimal schedule for the case W < V. Therefore, the derived properties are put on together to construct a heuristic solution algorithm for the case W < V, and its effectiveness is rated at the mean relative error of about 3% on randomly generated numerical problems.

• Journal of the Korea Concrete Institute
• /
• v.12 no.3
• /
• pp.77-85
• /
• 2000

Various concretes are used for construction works depending on the types of structure, building element and method of construction. An internal vibration work is one of the important processes for adequately pouring various concrete into a certain form. This study was undertaken to find out the effects of internal vibration on flowability of fresh concrete by concrete flow test under eight conditions of vibration. Presumable equation models also were created to show all vibration effects without regard to kinds of concrete. As the results of this study, the degree of vibration effects were varied according to the properties of concrete. Acceleration amplitude of vibration that applied to fresh concrete was effective value of the properties of vibration in a viewpoint of flowability. Moreover, This research presents the presumed equation models including variables created by acceleration amplitude and measuring value of vibrated concrete flow test. These models are presumable methods of vibration effects regardless of kinds of concrete.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2014.05a
• /
• pp.262-263
• /
• 2014

The purpose of this study was to investigate properties of high fluidity concrete adding waste marble powder. A change in the replacement ratios of waste marble powder was measured compressive strength and slump flow, O-Lot and U-Box. Waste marble powder has replaced binder of high fluidity concrete at certain contents of 0~20%. As a results, Slump flow, O-Lot and U-box adding waste marble powder up to 10% have increased by adding waste marble powder. As the concrete with a replacement ratio of waste marble powder up to 10% was found to have a compressive strength superior to that of plain.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.18 no.7
• /
• pp.652-655
• /
• 2005

ZnO thin films on (001) $Al_2O_3$ substrates have been deposited by pulsed laser deposition(PLD) technique using an Nd:YAG laser with a wavelength of 266 nm. The influence of the deposition parameters, such as oxygen gas flow, substrate temperature and laser energy density variation on the properties of the grown film, was studied. The experiments were performed for substrate temperatures in the range of $300\~450^{\circ}C$ and oxygen gas flow rate of $100\~900$ sccm. We investigated the structural and optical properties of ZnO thin films using X-ray diffraction(XRD) and photoluminescence(PL).

• 한국전산유체공학회:학술대회논문집
• /
• 2006.10a
• /
• pp.185-188
• /
• 2006

An investigation of the ejector-jets focusing on its flow properties was carried out by varying the geometric parameters. The area ratio of the primary nozzle, AR that was tested in the present measurement was 2.17 and 3.18, while the ratio of the length to the diameter of the duct downstream the primary nozzle inlet, L/D had values of 3.41, 6.82, and 10.23. For the frame work of flow characteristics, the wall pressures distribution of ejector-jet was investigated by experiment for basic study of ejector-jet performance. In result, terminal shock location and existence of series of oblique shocks are recognized. In this study, CFD analysis was conducted at the same time. And as a result of comparison experiment data with CFD analysis, the physical phenomena of ejector-jets were estimated.

• Journal of the Semiconductor & Display Technology
• /
• v.8 no.4
• /
• pp.59-63
• /
• 2009

This paper presents two dimensional simulation results of an inductively coupled $Ar/O_2$ plasma reactor. The effects of operating conditions on the plasma properties and the uniformity of atomic oxygen near the wafer were systematically investigated. The plasma density had the linear dependence on the chamber pressure, the flow rate of the feed gas and the power deposited into the plasma. On the other hand, the electron temperature decreased almost linearly with the chamber pressure and the flow rate of the feed gas. The power deposited into the plasma nearly unaffected the electron temperature. The simulation results showed that the uniformity of atomic oxygen near the wafer could be improved by lowering the chamber pressure and/or the flow rate of the feed gas. However, the power deposited into the plasma had an adverse effect on the uniformity.

• Journal of the Korean Society of Tobacco Science
• /
• v.5 no.2
• /
• pp.9-15
• /
• 1983

The effect of leaf dehydration process and air flow capacity of bulk curing on physical properties and composition of cured leaves was studied, respectively, during flue- curing. Cured leaves from excessive moisture during yellowing stage and those from rapid dehydration Process inevitably during later stages, tend towards lower equilibrium moisture contents, higher shatter index, hither protein nitrogen, and leaf scalding or deterioration of Beaves with redish cast. Early dehydration at the yellowing stage re suited in increasing of p Bamitic, stearic, linoleic, and linolenic acid contents, but showed reduction of brightness difference between upper and lower surface of the cured leaves, Leaf surface lipid decreased with the progress of curing stages, more conspicuously during later stage. Lowering air flow capacity of fan by 50oye during stem drying stage resulted in increasing of leaf surface lipid and 25oye decreasing of electric power consumption , but curing period and kerosene consumption were not affected.

• Proceedings of the KSME Conference
• /
• 2000.04a
• /
• pp.678-683
• /
• 2000

The one-dimensional performance model of a torque converter has been widely used to analyze and predict the performance and dynamic behavior of a torque converter. But this model doesn't include the information of the operating fluid properties. Therefore, to precisely predict dynamic performance of a torque converter, the effect of operating conditions must be considered through experimental coefficients such as friction loss coefficient and shock loss coefficient. And these coefficients cannot be achieved without experiments or internal flow analysis. In this study, the effects of varying material properties of operating fluid according to various operating temperatures are clarified with flow analysis of a torque converter. And these results are verified by comparing with those of performance experiment.

• Journal of the Korean Mathematical Society
• /
• v.46 no.2
• /
• pp.225-236
• /
• 2009

The equicontinuity and scattering properties of continuous semi-flows are studied on a compact metric space. The main results are obtained as follows: first, the complexity function defined by the spanning set is bounded if and only if the system is equicontinuous; secondly, if a continuous semi-flow is topologically weak mixing, then it is pointwise scattering; thirdly, several equivalent conditions for the time-one map of a continuous semi-flow to be scattering are presented; Finally, for a minimal continuous map it is shown that the "non-dense" requirement is unnecessary in the definition of scattering by using open covers.