• Asia pacific journal of information systems
• /
• v.26 no.3
• /
• pp.427-448
• /
• 2016

The stochastic phenomena of traffic network condition, such as traffic speed and density, are affected not only by exogenous traffic control but also by endogenous changes in service time during congestion. In this paper, we propose a mixed M/G/1 queuing model by introducing a condition-varying parameter of traffic congestion to reflect structural changes in the traffic network. We also develop congestion indices to evaluate network efficiency in terms of traffic flow and economic cost in traffic operating system using structure-changing queuing model, and perform scenario analysis according to various traffic network improvement policies. Empirical analysis using Korean highway traffic operating system shows that our suggested model better captures structural changes in the traffic queue. The scenario analysis also shows that occasional reversible lane operation during peak times can be more efficient and feasible than regular lane extension in Korea.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.9 no.8
• /
• pp.1683-1690
• /
• 2005

This study examines dynamic flow control method in UDP, analyzes packet loss which is frequently used element in measuring existing dynamic flow control and characteristics of round trip time, and proposes a new method of measurement, RSST. The algorithm that uses the proposed RSST enables accurate measurement of network status by considering both the currently measured network status and the past history of network status in controlling the transmission rate. For comparison study, a network status measurement software program that displays detailed information about volume of transmission generation of network status, and flow pattern of network was developed. The performance test shows that the proposed algorithm can better adjust to network condition in terms of low pack loss rate over existing algorithms.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.17 no.6
• /
• pp.1047-1054
• /
• 2022

With the advent of SDN, a next-generation network technology that separates the hardware and software areas of network equipment and defines the network using open source-based software, it solves the problems of complexity and scalability of the existing network system. It is now possible to configure a custom network according to the requirements. However, it has a structural disadvantage that a load on the network may occur due to a lot of control communication occurring between the controller and the switch, and many studies on network load distribution to effectively solve this have been preceded. In particular, in previous studies of load balancing techniques related to flow tables, many studies were conducted without consideration of flow entries, and as the number of flows increased, the packet processing speed decreased and the load was increased. To this end, we propose a new network load balancing technique that monitors flows in real time and applies dynamic flow management techniques to control the number of flows to an appropriate level while maintaining high packet processing speed.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2005.05b
• /
• pp.245-249
• /
• 2005

The numerical simulation of a two-phase flow In a discrete fracture network model is presented in this paper, The purpose of this work is to consider density-driven flows induced by the density difference between hot autochthonous heavy brines and injected cold water. Mechanical consequences of high pressure waves on the fracture permeability and heat exchanges between fluids and rock matrix are neglected in this study. The finite volume method is employed to discretize spatially and the system is solved by using an IMPES(Implicit Pressure-Explicit Saturation) scheme. In order to solve the strong non-linearity of the system, the Newton-Raphson algorithm is used. The well-known Buckeley-Leverett problem is adapted to validate results calculated from the model and a relatively good agreement is obtained.

• 제어로봇시스템학회:학술대회논문집
• /
• 1997.10a
• /
• pp.1792-1795
• /
• 1997

It is difficulte to control in the flow system because there are many disturbance. So it is impossible to control delicately sometimes by PI or PID. In this paper, we study on the application of intellignet control algorithms such as 2DOF PID control, neural network, Fuzzy contro, Relay feedback to the flow control system. the resultings are 2DOF-PID control is more good response.

• Corrosion Science and Technology
• /
• v.12 no.2
• /
• pp.79-84
• /
• 2013

In general, pipelines at nuclear power plants are affected by various types of degradation mechanisms and may be ruptured after gradually thinning. FAC (Flow-Accelerated Corrosion) is typical aging mechanism affecting the secondary side piping system. In Korea nuclear power plants, CHECWORKS program have been used for management of wall thinning damages. However, sometimes, CHECWORKS program shows wrong results at the stage of NFA (Network Flow Analysis) in case of complex pipelines. This paper describes the calculation results of pressure drop in a complex pipeline and single line by using the CHECWORKS program and the analysis results are compared with those of engineering calculation results including errors between them.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.8 no.3
• /
• pp.122-131
• /
• 2009

Ubiquitous-Transportation sensor network is able to realize a vehicle ad-hoc network. Since there are some problems in an existing ITS system, the new technology and traffic information strategies are requirements in this advanced system, u-TSN. The purposes of this paper is to introduce the components on u-TSN system, establish new traffic strategies for this system, and then evaluate these strategies by making a comparative study of ITS and using micro traffic simulator, AIMSUN. The strategy evaluated by AIMSUN is position-based multicast strategy which provides traffic information to vehicles using V2I (vehicle to Infrastructure) communication. This paper focuses on the providing real-time route guidance information when congestion is occurred by the incidents. This study estimates total travel time on each route by API modules. Result from simulation experiments suggests that position-based multicast strategy can achieve more optimal network performance and increased driver satisfaction since the total accumulated travel times of both the major road and the total system on position-based multicast strategy are less than those on VMS.

• Proceedings of the KIEE Conference
• /
• 2006.11a
• /
• pp.201-203
• /
• 2006

This paper presents a graphical windows-based software for the education and training of the transmission network use of system charge. The developed simulator consist of the main module(MMI,GUI), the power flow module(PF), the power flow tracing module(PFT) and management of usage cost DB module(UCD). Each module has a separate graphical and interactive interfacing window. To have effective education for transmission network use of system charge, the developed simulator are provided with two power system analysis methods. Input data of power system can use the format of PSS/E input data. Also calculation of power flow tracing are provided with four methods such as "Felix Wu","Modified Felix Wu", "DCLF ICRP" and "Reverse MW mile". Results of calculation for usage cost are shown on the window through the table or chart. Therefore user can confirm the detailed differences of results from each calculation method.

• 한국정보통신설비학회:학술대회논문집
• /
• 2007.08a
• /
• pp.191-195
• /
• 2007

Recently, landslides frequently happen at a natural slope during period of intensive rainfall. With rapidly increasing population of steep terrain in Korea, landslides have become one of the most significant natural hazards. Thus, it is necessary to protect people from landslides and to minimize the damage of houses, roads and other facilities. To accomplish this goal, many landslide prediction methods have been developed in the world. In this study, a simple landslide prediction system that enables people to escape the endangered area is developed. The system is focused to debris flows which happen frequently during periods of intensive rainfall at steep slopes in Kangwondo. This system is based on the wireless sensor network that is composed of sensor nodes, gateway, and server system. Sensor nodes that are composed of sensing part and communication part are newly developed to detect sensitive ground movement. Sensing part is designed to measure tilt angle and acceleration accurately, and communication part is deployed with Bluetooth (IEEE 802.15. I) module to transmit the data to the gateway. To verify the feasibility of this landslide prediction system, a series of laboratory tests is performed at a small-scale earth slope supplying rainfall by artificial rainfall dropping device. It is found that sensing nodes installed at slope can detect the ground motion when the slope failure starts. It is expected that the landslide prediction system by wireless senor network can provide early warnings when landslides such as debris flow occurs, and can be applied to ubiquitous computing city (U-City) that is characterized by disaster free.

• Journal of the Korean association of regional geographers
• /
• v.20 no.1
• /
• pp.30-48
• /
• 2014

Relying on the interaction indices - dominance index, relative strength index and entropy index, this paper analyzes the structural features of urban network in the Seoul metropolitan area with the flows of commuting, business, and freight. Analytical results show that the Seoul metropolitan urban system is vertical, size-dependent, one-way, and the highest city-dominant network rather than horizontal, size-neutral, two-way, complementary one. The network of freight flow is a little bit more symmetrical than the networks of commuting and business. However, the interaction with Seoul is still determinant in all aspects of hierarchical structure, relative strength, and symmetry of flow.