• 펄프종이기술
• /
• 제29권4호
• /
• pp.28-35
• /
• 1997

Sole-binder formulation has been recently introduced to solve the problems of coating process and printability caused by use of natural polymer However, the decrease of natural polymer application causes another problem in paper coating. Therefore, synthetic thickener is used to get similar effect to natural polymer usage. In this study. low shear viscosity, dewatering of coating colors were measured to evaluate the performance of the alkali sensitive water retention and rheology modifiers. The effects of alkali sensitive thickener on the physical properties of coated paper and printability were also investigated. The gloss and printability of coated paper containing the synthetic flow modifier were similar or superior to those of CMC containing coated paper. This modifier was also effective to improve the problems caused by the use of starch. The results indicated that the flow modifier synthesized with alkali sensitive thickener can reduce the problems of natural polymer and could be a good substitute f3r a natural polymer.

• Advances in aircraft and spacecraft science
• /
• 제9권2호
• /
• pp.131-148
• /
• 2022

The paper presents the surface-modified NACA 2412 airfoil performance with variable cavity characteristics such as size, shape and orientation, by numerically investigated with the pre-validation study. The study attempts to improve the airfoil aerodynamic performance at 30 m/s with a variable angle of attack (AOA) ranging from 0° to 20° under Reynolds number (R_e) 4.4×10⁵. Through passive surface control techniques, a boundary layer control strategy has been enhanced to improve flow performance. An intense background survey has been carried out over the modifier orientation, shape, and numbers to differentiate the sub-critical and post-critical flow regimes. The wall-bounded flows along with its governing equations are investigated using Reynolds Average Navier Strokes (RANS) solver coupled with one-equational transport Spalart Allmaras model. It was observed that the aerodynamic efficiency of cavity airfoil had been improved by enhancing maximum lift to drag ratio ((l/d) max) with delayed flow separation by keeping the flow attached beyond 0.25C even at a higher angle of attack. Detailed investigation on the cavity distribution pattern reveals that cavity depth and width are essential in degrading the early flow separation characteristics. In this study, overall general performance comparison, all the cavity airfoil models have delayed stalling compared to the original airfoil.

• 한국환경과학회지
• /
• 제10권4호
• /
• pp.311-314
• /
• 2001

The asphalt mixture with CRM(Crumb Rubber Modifier) is known to show a better performance in resisting thermal cracking, fatigue cracking and rutting compared with the conventional mixture. The laboratory tests on the physical characteristics of indirect tensile strength, density, flow and Marshall value of the CRM asphalt were conducted. The test results show that CRM asphalt has better physical characteristics than that of conventional asphalts. And the analysis on the noise reduction effect, penetration capacity from the field test on the national road in Haksan of Chungbuk, and recycling of tire waste were conducted. From this study, the results show that 1% CRM asphalt has higher the noise reduction effect and penetration capacity that those of conventional asphalts. And, optimal contents of crumb rubber modifier in the asphalt binder is one percent. In this case, crumb rubber modifier were used 10 kg to make the asphalt binder of one cubic meter. So it was named as Eco-asphalt.

• 펄프종이기술
• /
• 제43권3호
• /
• pp.121-127
• /
• 2011

This study used two types of rheology modifiers including an alkali-swellable emulsion (ASE) and an surface-adhesion emulsion (SAE) to elucidate their effects on high shear viscosity and dynamic penetration behavior among the flow properties of high solids coating. Since rheology under high shear and dynamic penetration behavior significantly affect the quality of coated paper in case of high solids coating, it is very important to examine the variations in rheology of high solids coating color by rheology modifier. It was found that the high solids coating color prepared with the SAE type showed superior dynamic penetration behavior and high shear viscosity than that with the ASE type rheology modifier.

• Food Science and Biotechnology
• /
• 제14권1호
• /
• pp.6-10
• /
• 2005

Optimal extraction conditions such as pressures, temperatures, and modifiers on glycyrrhizin extraction from licorice were investigated using supercritical $CO_2\;(SC-CO_2)$ at 3 mL/min flow rate. Morphology of licorice tissue, after glycyrrhizin extraction, was examined by SEM, and absolute density ($g/cm^3$) measurement and glycyrrhizin content were determined by HPLC. Pure $SC-CO_2$ had no effect on glycyrrhizin extraction, but recovery of glycyrrhizin ($32.66{\pm}0.77%$) was enhanced when water was used as modifier. The highest recovery was $97.22{\pm}2.17%$ when 70% (v/v) aqueous methanol was added to 15% (v/v) $SC-CO_2$ at 50 MPa and $60^{\circ}C$. Under optimal extraction conditions, 30 MPa pressure and $60^{\circ}C$ heating temperature, glycyrrhizin recovery reached maximum ($102.67{\pm}1.13%$) within 60 min. Licorice tissue was severely damaged by excessive swelling, and absolute density of licorice residues was highest when aqueous methanol was used as a modifier.

• 분석과학
• /
• 제21권5호
• /
• pp.392-396
• /
• 2008

산겨릅나무(Acer tegmentosum)는 지방간, 가염, 간경변증, 간암에 뚜렷한 치료 작용이 있으며, 특히 간에 쌓인 독을 풀고 간세포를 살리는 효능이 있어 약용으로 많이 사용된다. 그러나 산겨릅나무 줄기에는 독성물질이 있어 안전성, 오남용 등의 문제점을 가지고 있다. 그래서 산겨릅나무 줄기의 독성물질을 제거하고 독성 물질에 대한 연구를 활발히 하기 위해 먼저 초임계유체 추출기법(SFE, Supercritical Fluid Extraction)을 이용하였다. 초임계유체 추출에서 최적의 실험 조건은 압력 100 bar, 추출온도 $40^{\circ}C$로 구성하고, 초임계 $CO_2$의 유속 3 mL/min과 modifier인 에탄올의 유속 0.2 mL/min 이다.

• Elastomers and Composites
• /
• 제58권2호
• /
• pp.81-86
• /
• 2023

Asphalt pavements are generally composed of fine and coarse aggregates, bitumen, and modifier. Asphalt pavement wear particles (APWPs) are produced by friction between the road surface and the tire tread, and they flow into the environment such as rivers and oceans. Model APWPs were prepared and a single APWP of 212-500 (S-APWP) and 500-1000 ㎛ (L-APWP) was analyzed using thermogravimetric analysis (TGA) to investigate inhomogeneity in the compositions of the APWPs. The reference TGA thermogram was built using thermograms of the raw materials and formulation of the model asphalt pavement. The compositions of the APWPs were different from each other. Ash contents of the APWPs were lower than expected. Inhomogeneity in the total contents of bitumen and modifier was more severe than that in the other components. The inhomogeneity of the S-APWPs was more severe than that of the L-APWPs.

• 폴리머
• /
• 제26권2호
• /
• pp.237-244
• /
• 2002

본 논문은 폴리카보네이트 (PC)/폴리부틸렌 테레프탈레이트 (PBT)/충격보강제 (IM) 블렌드에서 PC와 PBT의 조성비에 따른 기계적 성질 및 유동 특성을 조사하였다. 부타디엔계 IM과 부틸아크릴레이트계 IM을 사용하여 각각의 함량에 따른 상온에서의 기계적 물성의 변화와 저온에서의 충격강도를 관찰하였다. 블렌드의 내화학성을 살펴보기 위해 PC/PBT/IM 블렌드를 유기용제인 신너에 침지시킨 후 기계적 물성의 변화를 분석하였다. 블렌드에 PC 함량이 많아질수록 인장 및 굴곡강도가 선형적으로 증가하였고 열변형 온도 역시 증가하였다. 충격강도는 PC의 함량이 약 50 wt% 일 때까지 급격히 증가하며 그 이상의 함량에서는 일정하게 유지되었다. 유동성은 PC함량이 증가할수록 감소하였다. IM의 종류에 따라서 충격특성이 다르게 관찰되었는데, 부틸 아크릴레이트계 IM은 $0^{\circ}C$ 이상의 온도에서 부타디엔계 IM보다 충격강도가 다소 높게 나타났으나 $0^{\circ}C$ 미만에서는 충격강도가 현저하게 낮아졌다. 내화학성 실험에서는 블렌드에서 PC의 함량이 많을수록 인장 및 굴곡강도가 감소하는 반면 충격강도는 증가하였다. 이는 유기용제에 약한 PC가 연화되면서 나타나는 현상이라 사료된다.

• 펄프종이기술
• /
• 제29권3호
• /
• pp.17-25
• /
• 1997

Natural water-soluble polymers such as starch, casein and carboxy methyl cellulose(CMC) have been limited in their uses. However, the proper water retention of coating colors can not be obtained without addition of these polymers. Furthermore, the coating runnability and the physical properties of coated paper were not also satisfied. Therefore, the objective of this study was to synthesize the water retention and flow modifiers which can improve the water retention and flow properties of coating colors. We have measured physical properties of flow modifiers and coating colors which included flow modifiers. The viscosity of flow modifiers was very low at acid pH, and rapidly increased at about pH 7, and gradually reached to equilibrium at alkali pH. Such an increase comes from the molecular weight of flow modifiers and the amount of acrylic and methacrylic acids. The viscosity of coating color containing the flow modifiers was lower than that containing CMC. However, both of them had little difference in water retention. The water-phase viscosity of synthetic modifier containing coating color was either higher or similar compared to that of CMC containing coating color. The high shear viscosity of coating colors was low. Therefore, it can be concluded that the synthetic flow modifiers are very useful for improvement of flow properties and water retentions.

• KSBB Journal
• /
• 제14권4호
• /
• pp.490-494
• /
• 1999

보조용매가 포함되지 않은 초임계이산화탄소를 이용하여 추출한 결과 온도 및 압력, 유속 등을 변경시켜도 genistein은 추출되지 않았다. 유기용매로 soaking한 결과를 보면 1mL ethanol로 soaking한 경우, 7.8%의 추출수율을 보였으며 함량도 약 7.8%정도를 나타내었다. Methanol로 soaking한 경우 더 낮은 수율과 함량을 보였다. 보조용매가 포함되지 않은 초임계이산화탄소로 추출한 결과 추출이 되지 않아서 보조용매를 이용하였다. 동일한 온도 압력 하에서 추출한 결과를 보면, ethanol이 methanol보다 효과가 우수하였다. 보조용매를 이용할 때 온도의 영향은 ethanol을 보조 용매로 사용한 경우, 압력 300bar일 때에 75$^{\circ}C$에서 56.4%의 최대수율을 나타내었고 함량은 55$^{\circ}C$일 때가 가장 높았다. 온도 35$^{\circ}C$조건에서 9%의 ethanol을 보조용매로 사용하여 압력의 영향을 조사하였다. 그 결과 300bar에서 genistein은 48.1%의 추출 수율을 얻을 수 있었다. 함량은 200bar일 때가 가장 높았지만 300bar와 비교해서 큰 차이가 없었다. 또한 ethanol을 보조용매로 사용할 때 초임계이산화탄소 유량에 대한 영향은 유량이 증가할수록 추출량도 증가하는 경향을 보였으며 함량도 약간 증가하였다. 온도 35$^{\circ}C$, 압력 275bar에서 ethanol 농도의 영향을 조사하였다. ethanol의 농도가 증가할수록 추출량도 증가하였으나 19%이후부터는 증가율이 둔화되었다. 보조용매를 첨가한 초임계유체를 이용하여 genistein을 추출하였을 때에 ethyl ether를 사용하여 추출했을 때와 비교해서 35$^{\circ}C$, 300bar, 30분간의 추출에서 genistein은 71% 추출수율과 31.5%의 함량을 나타내었다.