Journal of Korea Technical Association of The Pulp and Paper Industry (펄프종이기술)

Korea Technical Association of the Pulp and Paper Industry (한국펄프종이공학회)
권호 표지

Studies on Rheological Properties of High Solid Coating Colors(Part 2) - Effect of Rheology Modifiers on High-Shear Viscosity and Dynamic Penetration Behavior -

고농도 도공액의 유동특성에 관한 연구(제2보) - 유동성 조절제가 고전단 점도 및 동적 침투특성에 미치는 영향 -

  • Yoo, Sung-Jong (Artone paper Co. LTD.) ;
  • Cho, Byoung-Uk (Dept. of Paper Science ＆ Engineering, College of Forest and Environment Science, Kangwon National University) ;
  • Lee, Yong-Kyu (Dept. of Paper Science ＆ Engineering, College of Forest and Environment Science, Kangwon National University)
  • 유성종 (아트원제지주식회사) ;
  • 조병욱 (강원대학교 산림환경과학대학 제지공학과) ;
  • 이용규 (강원대학교 산림환경과학대학 제지공학과)
  • Received : 2011.09.05
  • Accepted : 2011.09.23
  • Published : 2011.09.30
Download PDF
⟨ Previous Next ⟩

Abstract

This study used two types of rheology modifiers including an alkali-swellable emulsion (ASE) and an surface-adhesion emulsion (SAE) to elucidate their effects on high shear viscosity and dynamic penetration behavior among the flow properties of high solids coating. Since rheology under high shear and dynamic penetration behavior significantly affect the quality of coated paper in case of high solids coating, it is very important to examine the variations in rheology of high solids coating color by rheology modifier. It was found that the high solids coating color prepared with the SAE type showed superior dynamic penetration behavior and high shear viscosity than that with the ASE type rheology modifier.

Keywords

References

  1. Kobayashi, T., Okuyama, T. and Koike T., Bleeding phenomena and a new trial of measurement of dynamic water retention on coating color, Japan TAPPI J. 49(2): 324-330 (1995). https://doi.org/10.2524/jtappij.49.324
  2. Weigl, J. and Grossmann, H., Factors impeding high-speed runnability of blade coaters, TAPPI J. 80(11): 223-232 (1997).
  3. Nishioka, T., A study of bleeding phenomina in blade coating, Japan TAPPI J. 49(2): 391-397 (1995). https://doi.org/10.2524/jtappij.49.391
  4. Vidal, F., Pommer, J.C., and Pouyet, J., High shear rheological measurement for coating colors: a new approach, 1993 Coating Conference Proceedings, TAPPI Press, Atalanta.
  5. Hirai, K. and Bousfield, D.W., The Correlation between penetration and coating properties, Coating & Graphic Arts Conference (2006).
  6. Nisogi, N.H., Bousfield D.W. and Lepoutre, P., Influence of coating rheology on final coating properties, TAPPI J. 83(2): 100-106 (2000).
  7. Nedwick, P. and Greenblatt, G., An overview of associative and alkali-swellable rheology modifiers, 1996 Nonwovens Conference Proceedings, TAPPI Press, Atlanta, pp. 205-209.
  8. Young, T.S. and Burdick, C.L., Water retention and rheology modifiers, In Paper Coating Additives, TAPPI PRESS, Atlanta (1995).
  9. Greenwald, H.L. and Luskin, L.S., Handbook of Water-Soluble Gums and Resins, Davidson R. L.(ed.), McGraw-Hill, New York, Chap. 17 (1980).
  10. Funke, W.E., J. Coating Tech. 60: 767 (1988)
  11. Technical information of Emtec company (Germany)