• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.25 no.1
• /
• pp.7-13
• /
• 2013

Bio Clean Room(BCR) and pharmaceutical product manufacturing facilities require careful assessment of many factors, including HVAC, controls, room finishes, process equipment, room operations, and utilities. Flow of equipment, personnel, and product must also be considered along with system flexibility, redundancy, and maintenance shutdown strategies. It is important to involve designers, operators, commissioning staff, quality control, maintenance, constructors, validation personnel, and the production representative during the conceptual stage of design. Critical variables for room environment and types of controls vary greatly with the clean space's intended purpose. It is particularly important to determine critical parameters with quality assurance to set limits and safety factors for temperature, humidity, room pressure, and other control requirements. In this paper, oxygen cluster ion equipment was utilized in order to enhance the indoor air quality and to prevent the airborne infection of ward in hospital. Moreover, the performance test of the equipment was also performed in order to develop the optimal sterilization system of BCR using the equipment.

• Journal of the Korea Society of Computer and Information
• /
• v.12 no.1 s.45
• /
• pp.107-116
• /
• 2007

Is need Remote Access through internet for business of Ubiquitous Computing age, and apply OTP for confidentiality about inputed ID and Password, network security of integrity. Current OTP must be possessing hardware of Token, and there is limitation in security. Install a Snooping tool to OTP network in this treatise, and because using Cain, enforce ARP Cache poisoning attack and confirm limitation by Snooping about user password. Wish to propose new system that can apply Tokenless OTP by new security way, and secure confidentiality and integrity. Do test for access control inflecting Tokenless OTP at Remote Access from outside, and could worm and do interface control with certification system in hundred. Even if encounter hacking at certification process, thing that connection is impossible without pin number that only user knows confirmed. Because becoming defense about outward flow and misuse and hacking of password when apply this result Tokenless OTP, solidify security, and evaluated by security system that heighten safety.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.36 no.8B
• /
• pp.947-953
• /
• 2011

These days, a consistent and fatal attack attribute toward a database has proportionally evolved in the similar development form to that of security policy. Because of access control-based defensive techniques regarding information created in closed networks and attacks on a limited access pathway, cases of infringement of many systems and databases based on accumulated and learned attack patterns from the past are increasing. Therefore, the paper aims to separate attack information by its types based on a virtual infringement pattern system loaded with dualistic VM in order to ensure stability to limited certification and authority to access, to propose a system that blocks infringement through the intensive management of infringement pattern concerning attack networks, and to improve the mechanism for implementing a test that defends the final database, the optimal defensive techniques, and the security policies, through research.

• Journal of the Korean Society of Safety
• /
• v.10 no.3
• /
• pp.96-105
• /
• 1995

The better industry develops, the more spaces need but in the limited area. Most building become larger and more complicated if the more spaces need in the constant area. And this leads to do underground work in long period generally six(6) months for 6 basement stories due to the selection of TOP DOWN technique. Working environment in this underground area can be problems and should not be overlooked, because air quality in underground spaces become quickly worse. Recently, department name to control construction safety has been changed to ENVIRONMENT & SAFETY TEAM from SAFETY TEAM. This means that it is very important to control against environmental condition at site so much. Overall construction work as well as underground work should conform to the requirement of working environment, particularly against inhabitants around the construction area. Strut protection, one of earth protection method, in case to 40m long strut may become weaker due to thermal stress or its longitudinally compressive strain and the another one, earth anchor protection may not be applied to the site In case of encroaching on vertical underground borderline because of regulation to prohibit it. It is necessary that TOP DOWN technique should be introduced in order to solve the external and internal problem of the site such as difficulty level of the work, potential danger with excavating depth, and shortening workperiod. It is needed that improving way of working condition should be shown and simplified computer simulation program should be also provided for checking pollution level & ventilation, excluding of lighting problem here. Results measured with conformance to the Regulation for Working Environment Measurement, enforced by Ministry of Labor have been applied to the computer program developed here. Sample air taken at unit workplace which was considered as exposing condition of pollutant at breathing point and within a range of behavior of the workers, Identified exposing group in underground work, using Moded Flow Life Finally, three types of ventilation system, type I with blower & ventilator, type II natural supply with mechanical ventilation system, and type I mechanical ventilation with Drivent Fan Unit System are selected for this study.

• Journal of Sensor Science and Technology
• /
• v.6 no.4
• /
• pp.307-315
• /
• 1997

In this paper, a sample chamber which provide easy replacement of ISFET sensor and consume only small sample volume for electrolyte analysis is designed and a 4-channel electrolyte analyzer employing 2-point calibration method is implemented. In addition, we proposed sample loading detection circuit for minimizing sample and calibration solutions and implemented it. Developed electrolyte analyzer consists of control system part and flow system part. For the effective control of the developed hardware, system software is developed as three individual routines ; measuring routine, calibration routine and washing routine.

• Journal of Korean Society of Transportation
• /
• v.23 no.1
• /
• pp.21-32
• /
• 2005

At present automated speed enforcement system in Korea control overspeed vehicle only in the specific spot. Because the drivers generally recognize the previous stated fact, they reduce a speed only in the establishment location of systems and increase rapidly again as soon as it passes the location. we have known that the rate of traffic risk at the tunnel, bridge and curve road segment is higher than other road section. Therefore, it needs speed control in them. In such a case, it is necessary to establish the automated traffic enforcement system based on the travel time speed of an individual vehicle over a pre defined stretch of road. In this study, the application limit of existing spot overspeed enforcement system was studied through an analysis of traffic flow characteristics in the tunnel, bridge and curve section. Also we found out the optimal distance of segment and the most suitable location to an application of the overspeed vehicle by travel time speed through an analysis of the road structure, traffic condition and accident numbers in the road.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2010.02a
• /
• pp.448-448
• /
• 2010

Magnetic random access memory (MRAM) has made a prominent progress in memory performance and has brought a bright prospect for the next generation nonvolatile memory technologies due to its excellent advantages. Dry etching process of magnetic thin films is one of the important issues for the magnetic devices such as magnetic tunneling junctions (MTJs) based MRAM. CoFeB is a well-known soft ferromagnetic material, of particular interest for magnetic tunnel junctions (MTJs) and other devices based on tunneling magneto-resistance (TMR), such as spin-transfer-torque MRAM. One particular example is the CoFeB - MgO - CoFeB system, which has already been integrated in MRAM. In all of these applications, knowledge of control over the etching properties of CoFeB is crucial. Recently, transferring the pattern by using milling is a commonly used, although the redeposition of back-sputtered etch products on the sidewalls and the low etch rate of this method are main disadvantages. So the other method which has reported about much higher etch rates of >$50{\AA}/s$ for magnetic multi-layer structures using $Cl_2$/Ar plasmas is proposed. However, the chlorinated etch residues on the sidewalls of the etched features tend to severely corrode the magnetic material. Besides avoiding corrosion, during etching facets format the sidewalls of the mask due to physical sputtering of the mask material. Therefore, in this work, magnetic material such as CoFeB was etched in an ICP etching system using the gases which can be expected to form volatile metallo-organic compounds. As the gases, carbon monoxide (CO) and ammonia ($NH_3$) were used as etching gases to form carbonyl volatiles, and the etched features of CoFeB thin films under by Ta masking material were observed with electron microscopy to confirm etched resolution. And the etch conditions such as bias power, gas combination flow, process pressure, and source power were varied to find out and control the properties of magnetic layer during the process.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.39 no.6
• /
• pp.743-750
• /
• 2019

Most of the water supply facilities that use rivers as sources do not have monitoring facilities such as precipitation and stream flow measurement, and there is no judgment standard for drought response such as water intake control in river flow during dry season. In addition, it was confirmed that local government officials, who deal with actual drought work, have limitations in applying the drought index (SPI, PDSI, etc.) and diffusion models that have been proposed so far in advance. Therefore, in this study, the drought prediction system was constructed to determine the number of water-intake available days using SWAT (Soil and Water Assessment Tool) and the water supply network from the intake source to the beneficiary area, suggesting the drought spreading time and space.

• Journal of Internet Computing and Services
• /
• v.6 no.3
• /
• pp.71-84
• /
• 2005

Recently, the expert call center solution has become the center of interest, since finance and tele-marketing system, which is focused on a communication industry, have been increasing, Specially, the call center market is growing up with a supporting Caller-ID for a cellular phone in Korea, In the present, although large size companies are developing expensive solutions and instruments to service only for the big companies, there little solutions for SOHO markets, Therefore, in this paper we have shown a design and an implementation of a CTI system which is capable of in/outbound call processing by using CTI, and providing stable services by linking the customer's DB. And these functionalities have become possible by integrating functions of PBX and the computer control of the PBX. First, we have constructed call flows and analyzed packets for the standard communication through the PBX in call. Then, we have designed and implemented a middleware which linked a call between a client and a customer. Finally, we have constructed a database module for applying the CRM technology to the management of customer's contents.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.48 no.9
• /
• pp.717-724
• /
• 2020

We study the closing characteristics of a self-sustainable poppet valve which serves as a main oxidizer shut-off valve for liquid rocket engines. Numerical analysis for predicting closing transient responses are presented and the calculated results have been verified by a comparison with experimental data. The effective area of a pilot gas discharge system and the pressure distribution of passage flow around the valve moving part are shown to be main parameters in determining the closing characteristics for dry and cryogenic conditions, respectively. Moreover, it is presented that the passage flow pressure at the valve closing moment as well as the valve closing velocity can be effectively adjusted by the appropriate employment of the pilot gas.